Windows won't shut down since last update to V1909 build 18363.900

dalchina said:

Good result for disk.

That was an admin command prompt - not Powershell.

Try disconnecting the other disks- that will also check whether your PC is really booting from your Disk 1.

Await partition screenshot.

OK will try that later . were the partition screenshots not what you wanted?

mike

- - - Updated - - -

zbook said:

This is a trial and error step:

Boot using a Windows 10 iso

type: bcdedit | find "osdevice"

type: dism /image:M:\ /cleanup-image /revertpendingactions (change M to the applicable drive letter for the partition drive letter seen in the earlier steps: partition=?) ( There is a space between \ / )

reboot

Thanks
I think I have a win 10 ISO somewhere, so after I boot into windows I type the commands into powershell is that correct?
I tried in my current setup and I got an error message "FIND: Parameter format not correct"
I tried in cmd and nothing happens.
sorry if I'm being stupid

Mike

There is a Windows Recovery Environment (RE) on a bootble windows 10 iso.
Open troubleshooting > command prompt > continue with the prior steps.

Powershell is available within Windows but not yet in Windows RE.

zbook said:

There is a Windows Recovery Environment (RE) on a bootble windows 10 iso.
Open troubleshooting > command prompt > continue with the prior steps.

Powershell is available within Windows but not yet in Windows RE.

Ok before I read your last reply. I remembered I had a spare ssd which was a clone of my system a few months back.
I slotted it into my system and added this to my boot menu.

Booted up Ok tried bcdedit | find "osdevice"
I realised that you must have had a typo and tried (bcdedit / find "osdevice")
tried it cmd and powershell but it won't work in either.
I did bcdedit /? and find is not in the list of commands for bcdedit.

Of course as I don't really know what this is supposed to achieve so I might be doing this completely wrong.
And I assume anyway that I should boot from a usb to get sensible results but I am guessing here ?

thanks for your patience

Mike
Oh BTW one interesting clue that I gained by booting into the clone ssd was that when i restarted it worked !!
so I think it means all of the hardware is ok except possibly the c drive. ?

A bootable windows 10 iso has Windows RE.

There is also a Windows RE on the computer.
Sometimes one Windows RE performs differently from the other.
So using the Windows RE on the iso was suggested.

If you have a flash drive that you can format you can create a bootable windows 10 iso:
https://www.microsoft.com/en-us/soft...load/windows10
Download Windows 10 ISO File
Create Bootable USB Flash Drive to Install Windows 10


See if the command can run successfully using Windows RE on the computer using command prompt:
Boot to Advanced Startup Options in Windows 10


This is using administrative command prompt (normal windows boot):

Code:

C:\WINDOWS\system32>bcdedit | find "osdevice"
osdevice                partition=C:

C:\WINDOWS\system32>

Using Windows RE on a bootable flash drive the drive letter may be different from C:
So the bcdedit command is used.

Ok I Understand now, thanks

Mike

- - - Updated - - -

I booted into the installation usb and got to the command prompt but got the same results as far as the bcdedit / find "osdevice" command. So I tried bcdedit /? and it was the same. no find command in bcdedit

- - - Updated - - -

Oh and when I shutdown from there the PC shutdown OK

and I notice in your last reply you still used the "|" rather than "/" is that a typo ? only I did try that as well but that does not work either

- - - Updated - - -

I thought I'd better show you my results from typing it both ways


- - - Updated - - -

I have made a breakthrough of sorts.
I added a "Verbose" entry in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
and turned it on.
When I shut down It showed that it was sticking on Shutting down Hyper-v virtual machine management.
I temporarily turned off Hyper V in the windows features and shut down. It didn't work at first as even though I had stopped the service as well. it must have restarted as it stuck at the same spot.
after a forced shutdown though I rebooted and it began the windows update. after a long time updating winver still shows v 1909 though. ??
am going to test shutting down a few times to see what happens . If it works I'll try to turn hyper V on again
Thanks

Mike

1) Open disk management > by default some columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cutoff > view disk 0 > widen this row as needed so that all of the characters are in full view > post an image into the thread
Disk Management - How to Post a Screenshot of

2) There are log collectors used in another Ten Forums room.
Run each V2 and DM and upload results directly into this thread:
BSOD - Posting Instructions

3) Indicate whether you prefer to remain with 1909 or upgrade to 2004


4) Open administrative command prompt and copy and paste (all at one time):

Code:

bcdedit /enum all
bcdedit | find "osdevice"
reagentc / info
diskpart
lis dis
lis vol
sel dis 0
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par
sel dis 1
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel dis 2
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel dis 3
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel dis 4
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel dis 5
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par

5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

Ok here goes! Link to my dropbox folder named TenForums includes V2 and DM results

Dropbox - TenForums - Simplify your life

I have started the update to V2004 already. its downloading now!

Command Promp output.

Microsoft Windows [Version 10.0.18363.900]
(c) 2019 Microsoft Corporation. All rights reserved.

C:\Windows\system32>bcdedit /enum all

Firmware Boot Manager
---------------------
identifier {fwbootmgr}
displayorder {bootmgr}
{cda31b55-ca18-11ea-8cef-806e6f6e6963}
{7d0adcae-ca6f-11ea-8cf2-806e6f6e6963}
timeout 1

Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager
locale en-us
inherit {globalsettings}
default {current}
resumeobject {34f901ae-8241-11ea-8c85-00158315a310}
displayorder {current}
{5f78f907-4ce0-11ea-aea1-00158315a310}
{34f901b0-8241-11ea-8c85-00158315a310}
toolsdisplayorder {memdiag}
timeout 10

Firmware Application (101fffff)
-------------------------------
identifier {7d0adcae-ca6f-11ea-8cf2-806e6f6e6963}
device unknown
description UEFI: KingstonDataTraveler 3.0, Partition 1

Firmware Application (101fffff)
-------------------------------
identifier {cda31b55-ca18-11ea-8cef-806e6f6e6963}
device unknown
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager

Windows Boot Loader
-------------------
identifier {103c6a30-6596-11e8-883f-8c4d0bb2028e}
device ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{103c6a31-6596-11e8-883f-8c4d0bb2028e}
path \windows\system32\winload.efi
description Windows Recovery Environment
locale en-GB
inherit {bootloadersettings}
displaymessage Recovery
osdevice ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{103c6a31-6596-11e8-883f-8c4d0bb2028e}
systemroot \windows
nx OptIn
bootmenupolicy Standard
winpe Yes

Windows Boot Loader
-------------------
identifier {28976375-4e4a-11ea-8c0e-b3445158d64e}
device ramdisk=[\Device\HarddiskVolume3]\Recovery\WindowsRE\Winre.wim,{28976376-4e4a-11ea-8c0e-b3445158d64e}
path \windows\system32\winload.efi
description Windows Recovery Environment
locale en-GB
inherit {bootloadersettings}
displaymessage Recovery
osdevice ramdisk=[\Device\HarddiskVolume3]\Recovery\WindowsRE\Winre.wim,{28976376-4e4a-11ea-8c0e-b3445158d64e}
systemroot \windows
nx OptIn
bootmenupolicy Standard
winpe Yes

Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \Windows\system32\winload.efi
description Windows 10
locale en-us
inherit {bootloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \Windows
resumeobject {34f901ae-8241-11ea-8c85-00158315a310}
nx OptIn
bootmenupolicy Standard

Windows Boot Loader
-------------------
identifier {34f901b0-8241-11ea-8c85-00158315a310}
device unknown
path \Windows\system32\winload.efi
description Windows Clone
locale en-US
osdevice unknown
systemroot \Windows
resumeobject {e31849e0-ca18-11ea-8c6a-806e6f6e6963}

Windows Boot Loader
-------------------
identifier {5f78f907-4ce0-11ea-aea1-00158315a310}
device ramdisk=[C:]\boot\macrium\WA10KFiles\media\sources\boot.wim,{ramdiskoptions}
path \windows\system32\boot\winload.efi
description Macrium Reflect System Recovery
osdevice ramdisk=[C:]\boot\macrium\WA10KFiles\media\sources\boot.wim,{ramdiskoptions}
systemroot \Windows
detecthal Yes
winpe Yes

Windows Boot Loader
-------------------
identifier {890f989b-7d40-11e2-8053-9b1bda41daaa}
device ramdisk=[unknown]\Recovery\890f989b-7d40-11e2-8053-9b1bda41daaa\Winre.wim,{890f989c-7d40-11e2-8053-9b1bda41daaa}
path \windows\system32\winload.efi
description Windows Recovery Environment
inherit {bootloadersettings}
osdevice ramdisk=[unknown]\Recovery\890f989b-7d40-11e2-8053-9b1bda41daaa\Winre.wim,{890f989c-7d40-11e2-8053-9b1bda41daaa}
systemroot \windows
nx OptIn
winpe Yes

Windows Boot Loader
-------------------
identifier {faa79e29-81c3-4c2e-8b4b-20715e2d5276}
device ramdisk=[C:]\Aomei\AomeiBoot.wim,{0b5d695b-f28d-40a9-9277-c15e9dfc9b01}
description Aomei PE
osdevice ramdisk=[C:]\Aomei\AomeiBoot.wim,{0b5d695b-f28d-40a9-9277-c15e9dfc9b01}
systemroot \Windows
detecthal Yes
winpe Yes

Resume from Hibernate
---------------------
identifier {34f901ae-8241-11ea-8c85-00158315a310}
device partition=C:
path \Windows\system32\winresume.efi
description Windows Resume Application
locale en-us
inherit {resumeloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filedevice partition=C:
filepath \hiberfil.sys
bootmenupolicy Standard
debugoptionenabled No

Resume from Hibernate
---------------------
identifier {5868483b-4a5a-11ea-924b-ccb6c4ccb2c6}
device unknown
path \Windows\system32\winresume.efi
description Windows Resume Application
locale en-GB
inherit {resumeloadersettings}
recoverysequence {5868483d-4a5a-11ea-924b-ccb6c4ccb2c6}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filedevice unknown
filepath \hiberfil.sys
bootmenupolicy Standard
debugoptionenabled No

Resume from Hibernate
---------------------
identifier {e31849e0-ca18-11ea-8c6a-806e6f6e6963}
device unknown
path \Windows\system32\winresume.efi
description Windows Clone
locale en-US
inherit {resumeloadersettings}
filedevice unknown
filepath \hiberfil.sys
debugoptionenabled No

Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \EFI\Microsoft\Boot\memtest.efi
description Windows Memory Diagnostic
locale en-us
inherit {globalsettings}
badmemoryaccess Yes

EMS Settings
------------
identifier {emssettings}
bootems No

Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Serial
debugport 1
baudrate 115200

RAM Defects
-----------
identifier {badmemory}

Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}

Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}

Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200

Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}

Device options
--------------
identifier {0b5d695b-f28d-40a9-9277-c15e9dfc9b01}
ramdisksdidevice partition=C:
ramdisksdipath \Aomei\AomeiBoot.sdi

Device options
--------------
identifier {28976376-4e4a-11ea-8c0e-b3445158d64e}
description Windows Recovery
ramdisksdidevice partition=\Device\HarddiskVolume3
ramdisksdipath \Recovery\WindowsRE\boot.sdi

Device options
--------------
identifier {890f989c-7d40-11e2-8053-9b1bda41daaa}
description Ramdisk Options
ramdisksdidevice partition=C:
ramdisksdipath \Recovery\890f989b-7d40-11e2-8053-9b1bda41daaa\boot.sdi

Setup Ramdisk Options
---------------------
identifier {ramdiskoptions}
description Macrium Reflect System Recovery
ramdisksdidevice partition=C:
ramdisksdipath \boot\Macrium\boot.sdi

C:\Windows\system32>bcdedit | find "osdevice"
osdevice partition=C:
osdevice ramdisk=[C:]\boot\macrium\WA10KFiles\media\sources\boot.wim,{ramdiskoptions}
osdevice unknown

C:\Windows\system32>reagentc / info

Configures the Windows Recovery Environment (Windows RE) and system reset.

REAGENTC.EXE <command> <arguments>

The following commands can be specified:

/info - Displays Windows RE and system reset configuration
information.
/setreimage - Sets the location of the custom Windows RE image.
/enable - Enables Windows RE.
/disable - Disables Windows RE.
/boottore - Configures the system to start Windows RE next time the
system starts up.
/setbootshelllink - Adds an entry to the Reset and Restore page in the boot
menu.

For more information about these commands and their arguments, type
REAGENTC.EXE <command> /?.

Examples:
REAGENTC.EXE /setreimage /?
REAGENTC.EXE /disable /?


C:\Windows\system32>diskpart

Microsoft DiskPart version 10.0.18362.1

Copyright (C) Microsoft Corporation.
On computer: MAIN

DISKPART> lis dis

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 10 GB *
Disk 1 Online 465 GB 1024 KB *
Disk 2 Online 447 GB 0 B
Disk 3 Online 1863 GB 0 B
Disk 4 Online 3726 GB 0 B *
Disk 5 Online 223 GB 0 B *

DISKPART> lis vol

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
Volume 1 FAT32 Partition 99 MB Healthy System
Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy
Volume 3 E Adata ssd NTFS Partition 447 GB Healthy
Volume 4 S 2TB NTFS Partition 1863 GB Healthy
Volume 5 A 4TB NTFS Partition 3725 GB Healthy
Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

DISKPART> sel dis 0

Disk 0 is now the selected disk.

DISKPART> det dis

Samsung SSD 970 EVO 250GB
Disk ID: {5E7EBFD5-8B41-4535-A2AD-038FF07AEF63}
Type : NVMe
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0101)#PCI(0000)#NVME(P00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
Volume 1 FAT32 Partition 99 MB Healthy System

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 99 MB 1024 KB
Partition 2 Primary 221 GB 101 MB
Partition 3 Recovery 543 MB 222 GB
Partition 4 Reserved 16 MB 222 GB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Hidden : Yes
Required: No
Attrib : 0000000000000000
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 1 FAT32 Partition 99 MB Healthy System

DISKPART> sel par 2

Partition 2 is now the selected partition.

DISKPART> det par

Partition 2
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 105906176

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot

DISKPART> sel par 3

Partition 3 is now the selected partition.

DISKPART> det par

Partition 3
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : No
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 238476591104

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 7 RAW Partition 543 MB Healthy Hidden

DISKPART> sel par 4

Partition 4 is now the selected partition.

DISKPART> det par

Partition 4
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0X8000000000000000
Offset in Bytes: 239045967872

There is no volume associated with this partition.

DISKPART> sel par 5

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 6

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 1

Disk 1 is now the selected disk.

DISKPART> det dis

WDC WDS500G2B0C-00PXH0
Disk ID: {DE31E025-4F86-48B1-9C57-74360D8AB8FF}
Type : NVMe
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0002)#PCI(0400)#PCI(0000)#NVME(P00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Reserved 15 MB 17 KB
Partition 2 Primary 465 GB 16 MB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0000000000000000
Offset in Bytes: 17408

There is no volume associated with this partition.

DISKPART> sel par 2

Partition 2 is now the selected partition.

DISKPART> det par

Partition 2
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 16777216

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 4

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 2

Disk 2 is now the selected disk.

DISKPART> det dis

ADATA SP550
Disk ID: 51C2D7D9
Type : SATA
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 447 GB 1024 KB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : 07
Hidden: No
Active: No
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

DISKPART> sel par 2

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 3

Disk 3 is now the selected disk.

DISKPART> det dis

WDC WD20EZRX-00D8PB0
Disk ID: 104295D6
Type : SATA
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 4 S 2TB NTFS Partition 1863 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 1863 GB 1024 KB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : 07
Hidden: No
Active: Yes
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 4 S 2TB NTFS Partition 1863 GB Healthy

DISKPART> sel par 2

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 4

Disk 4 is now the selected disk.

DISKPART> det dis

ST4000DM000-2AE166
Disk ID: {39282EE0-FD9D-45E5-9C5D-C8CAFB1CF1DB}
Type : SATA
Status : Online
Path : 3
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C03T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 5 A 4TB NTFS Partition 3725 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Reserved 128 MB 17 KB
Partition 2 Primary 3725 GB 129 MB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0000000000000000
Offset in Bytes: 17408

There is no volume associated with this partition.

DISKPART> sel par 2

Partition 2 is now the selected partition.

DISKPART> det par

Partition 2
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 135266304

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 5 A 4TB NTFS Partition 3725 GB Healthy

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 4

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 5

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 5

Disk 5 is now the selected disk.

DISKPART> det dis

KINGSTON SH103S3240G
Disk ID: {66FBF059-5C85-11EA-8C1B-00158315A310}
Type : SATA
Status : Online
Path : 4
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C04T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 223 GB 1024 KB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

DISKPART> sel par 2

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det parbcdedit /enum all

Microsoft DiskPart version 10.0.18362.1

DISK - Display the properties of the selected disk.
PARTITION - Display the properties of the selected partition.
VOLUME - Display the properties of the selected volume.
VDISK - Displays the properties of the selected virtual disk.

DISKPART> bcdedit | find "osdevice"

Microsoft DiskPart version 10.0.18362.1

ACTIVE - Mark the selected partition as active.
ADD - Add a mirror to a simple volume.
ASSIGN - Assign a drive letter or mount point to the selected volume.
ATTRIBUTES - Manipulate volume or disk attributes.
ATTACH - Attaches a virtual disk file.
AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
BREAK - Break a mirror set.
CLEAN - Clear the configuration information, or all information, off the
disk.
COMPACT - Attempts to reduce the physical size of the file.
CONVERT - Convert between different disk formats.
CREATE - Create a volume, partition or virtual disk.
DELETE - Delete an object.
DETAIL - Provide details about an object.
DETACH - Detaches a virtual disk file.
EXIT - Exit DiskPart.
EXTEND - Extend a volume.
EXPAND - Expands the maximum size available on a virtual disk.
FILESYSTEMS - Display current and supported file systems on the volume.
FORMAT - Format the volume or partition.
GPT - Assign attributes to the selected GPT partition.
HELP - Display a list of commands.
IMPORT - Import a disk group.
INACTIVE - Mark the selected partition as inactive.
LIST - Display a list of objects.
MERGE - Merges a child disk with its parents.
ONLINE - Online an object that is currently marked as offline.
OFFLINE - Offline an object that is currently marked as online.
RECOVER - Refreshes the state of all disks in the selected pack.
Attempts recovery on disks in the invalid pack, and
resynchronizes mirrored volumes and RAID5 volumes
that have stale plex or parity data.
REM - Does nothing. This is used to comment scripts.
REMOVE - Remove a drive letter or mount point assignment.
REPAIR - Repair a RAID-5 volume with a failed member.
RESCAN - Rescan the computer looking for disks and volumes.
RETAIN - Place a retained partition under a simple volume.
SAN - Display or set the SAN policy for the currently booted OS.
SELECT - Shift the focus to an object.
SETID - Change the partition type.
SHRINK - Reduce the size of the selected volume.
UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
master boot record (MBR) signature of a disk.

DISKPART> reagentc / info

Microsoft DiskPart version 10.0.18362.1

ACTIVE - Mark the selected partition as active.
ADD - Add a mirror to a simple volume.
ASSIGN - Assign a drive letter or mount point to the selected volume.
ATTRIBUTES - Manipulate volume or disk attributes.
ATTACH - Attaches a virtual disk file.
AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
BREAK - Break a mirror set.
CLEAN - Clear the configuration information, or all information, off the
disk.
COMPACT - Attempts to reduce the physical size of the file.
CONVERT - Convert between different disk formats.
CREATE - Create a volume, partition or virtual disk.
DELETE - Delete an object.
DETAIL - Provide details about an object.
DETACH - Detaches a virtual disk file.
EXIT - Exit DiskPart.
EXTEND - Extend a volume.
EXPAND - Expands the maximum size available on a virtual disk.
FILESYSTEMS - Display current and supported file systems on the volume.
FORMAT - Format the volume or partition.
GPT - Assign attributes to the selected GPT partition.
HELP - Display a list of commands.
IMPORT - Import a disk group.
INACTIVE - Mark the selected partition as inactive.
LIST - Display a list of objects.
MERGE - Merges a child disk with its parents.
ONLINE - Online an object that is currently marked as offline.
OFFLINE - Offline an object that is currently marked as online.
RECOVER - Refreshes the state of all disks in the selected pack.
Attempts recovery on disks in the invalid pack, and
resynchronizes mirrored volumes and RAID5 volumes
that have stale plex or parity data.
REM - Does nothing. This is used to comment scripts.
REMOVE - Remove a drive letter or mount point assignment.
REPAIR - Repair a RAID-5 volume with a failed member.
RESCAN - Rescan the computer looking for disks and volumes.
RETAIN - Place a retained partition under a simple volume.
SAN - Display or set the SAN policy for the currently booted OS.
SELECT - Shift the focus to an object.
SETID - Change the partition type.
SHRINK - Reduce the size of the selected volume.
UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
master boot record (MBR) signature of a disk.

DISKPART> diskpart

Microsoft DiskPart version 10.0.18362.1

ACTIVE - Mark the selected partition as active.
ADD - Add a mirror to a simple volume.
ASSIGN - Assign a drive letter or mount point to the selected volume.
ATTRIBUTES - Manipulate volume or disk attributes.
ATTACH - Attaches a virtual disk file.
AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
BREAK - Break a mirror set.
CLEAN - Clear the configuration information, or all information, off the
disk.
COMPACT - Attempts to reduce the physical size of the file.
CONVERT - Convert between different disk formats.
CREATE - Create a volume, partition or virtual disk.
DELETE - Delete an object.
DETAIL - Provide details about an object.
DETACH - Detaches a virtual disk file.
EXIT - Exit DiskPart.
EXTEND - Extend a volume.
EXPAND - Expands the maximum size available on a virtual disk.
FILESYSTEMS - Display current and supported file systems on the volume.
FORMAT - Format the volume or partition.
GPT - Assign attributes to the selected GPT partition.
HELP - Display a list of commands.
IMPORT - Import a disk group.
INACTIVE - Mark the selected partition as inactive.
LIST - Display a list of objects.
MERGE - Merges a child disk with its parents.
ONLINE - Online an object that is currently marked as offline.
OFFLINE - Offline an object that is currently marked as online.
RECOVER - Refreshes the state of all disks in the selected pack.
Attempts recovery on disks in the invalid pack, and
resynchronizes mirrored volumes and RAID5 volumes
that have stale plex or parity data.
REM - Does nothing. This is used to comment scripts.
REMOVE - Remove a drive letter or mount point assignment.
REPAIR - Repair a RAID-5 volume with a failed member.
RESCAN - Rescan the computer looking for disks and volumes.
RETAIN - Place a retained partition under a simple volume.
SAN - Display or set the SAN policy for the currently booted OS.
SELECT - Shift the focus to an object.
SETID - Change the partition type.
SHRINK - Reduce the size of the selected volume.
UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
master boot record (MBR) signature of a disk.

DISKPART> lis dis

Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 10 GB *
Disk 1 Online 465 GB 1024 KB *
Disk 2 Online 447 GB 0 B
Disk 3 Online 1863 GB 0 B
Disk 4 Online 3726 GB 0 B *
* Disk 5 Online 223 GB 0 B *

DISKPART> lis vol

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
Volume 1 FAT32 Partition 99 MB Healthy System
Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy
Volume 3 E Adata ssd NTFS Partition 447 GB Healthy
Volume 4 S 2TB NTFS Partition 1863 GB Healthy
Volume 5 A 4TB NTFS Partition 3725 GB Healthy
Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

DISKPART> sel dis 0

Disk 0 is now the selected disk.

DISKPART> det dis

Samsung SSD 970 EVO 250GB
Disk ID: {5E7EBFD5-8B41-4535-A2AD-038FF07AEF63}
Type : NVMe
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0101)#PCI(0000)#NVME(P00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
Volume 1 FAT32 Partition 99 MB Healthy System

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 99 MB 1024 KB
Partition 2 Primary 221 GB 101 MB
Partition 3 Recovery 543 MB 222 GB
Partition 4 Reserved 16 MB 222 GB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Hidden : Yes
Required: No
Attrib : 0000000000000000
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 1 FAT32 Partition 99 MB Healthy System

DISKPART> sel par 2

Partition 2 is now the selected partition.

DISKPART> det par

Partition 2
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 105906176

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot

DISKPART> sel par 3

Partition 3 is now the selected partition.

DISKPART> det par

Partition 3
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : No
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 238476591104

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 7 RAW Partition 543 MB Healthy Hidden

DISKPART> sel par 4

Partition 4 is now the selected partition.

DISKPART> det par

Partition 4
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0X8000000000000000
Offset in Bytes: 239045967872

There is no volume associated with this partition.

DISKPART> sel par 5

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 6

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 1

Disk 1 is now the selected disk.

DISKPART> det dis

WDC WDS500G2B0C-00PXH0
Disk ID: {DE31E025-4F86-48B1-9C57-74360D8AB8FF}
Type : NVMe
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0002)#PCI(0400)#PCI(0000)#NVME(P00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Reserved 15 MB 17 KB
Partition 2 Primary 465 GB 16 MB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0000000000000000
Offset in Bytes: 17408

There is no volume associated with this partition.

DISKPART> sel par 2

Partition 2 is now the selected partition.

DISKPART> det par

Partition 2
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 16777216

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 4

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 2

Disk 2 is now the selected disk.

DISKPART> det dis

ADATA SP550
Disk ID: 51C2D7D9
Type : SATA
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 447 GB 1024 KB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : 07
Hidden: No
Active: No
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

DISKPART> sel par 2

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 3

Disk 3 is now the selected disk.

DISKPART> det dis

WDC WD20EZRX-00D8PB0
Disk ID: 104295D6
Type : SATA
Status : Online
Path : 1
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C01T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 4 S 2TB NTFS Partition 1863 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 1863 GB 1024 KB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : 07
Hidden: No
Active: Yes
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 4 S 2TB NTFS Partition 1863 GB Healthy

DISKPART> sel par 2

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 4

Disk 4 is now the selected disk.

DISKPART> det dis

ST4000DM000-2AE166
Disk ID: {39282EE0-FD9D-45E5-9C5D-C8CAFB1CF1DB}
Type : SATA
Status : Online
Path : 3
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C03T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 5 A 4TB NTFS Partition 3725 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Reserved 128 MB 17 KB
Partition 2 Primary 3725 GB 129 MB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0000000000000000
Offset in Bytes: 17408

There is no volume associated with this partition.

DISKPART> sel par 2

Partition 2 is now the selected partition.

DISKPART> det par

Partition 2
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 135266304

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 5 A 4TB NTFS Partition 3725 GB Healthy

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 4

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 5

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel dis 5

Disk 5 is now the selected disk.

DISKPART> det dis

KINGSTON SH103S3240G
Disk ID: {66FBF059-5C85-11EA-8C1B-00158315A310}
Type : SATA
Status : Online
Path : 4
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C04T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

DISKPART> lis par

Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Primary 223 GB 1024 KB

DISKPART> sel par 1

Partition 1 is now the selected partition.

DISKPART> det par

Partition 1
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 1048576

Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

DISKPART> sel par 2

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

There is no partition selected.
Please select a partition and try again.

DISKPART> sel par 3

The specified partition is not valid.
Please select a valid partition.

There is no partition selected.

DISKPART> det par

1) Had you modified partitions on any of the disks?

2) The logs displayed a BSOD today:
2020-07-20T18:26:18.594

3) Update the thread with the upgrade attempt

zbook said:

1) Had you modified partitions on any of the disks?

2) The logs displayed a BSOD today:
2020-07-20T18:26:18.594

3) Update the thread with the upgrade attempt

1)haven't modified partitions since my last re-install which was in March this year.
2) certainly didn't see any Blue screen yesterday
3) sorry not sure what you mean

I didn't let it upgrade last night was just going to do it now. I just have to restart ,do you want me to do that Now?

- - - Updated - - -

Ok so I think the update that happened yesterday wes only a minor updat and not the 2004 one.
I downloaded the 2004 update last night and have now successfully installed it'

I have created a new V2 log and New DM log after the update and replaced the old logs in my dropbox so I assume the old link will still work.

Hopefully that's what you wanted me to do.