Windows won't shut down since last update to V1909 build 18363.900

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 34,980
    Win 10 Pro (1903) (2nd PC is 21H2)
       #11

    The thread is now yours, zbook.
      My Computers


  2. Posts : 105
    Windows 10 pro
    Thread Starter
       #12

    dalchina said:
    Good result for disk.

    That was an admin command prompt - not Powershell.

    Try disconnecting the other disks- that will also check whether your PC is really booting from your Disk 1.

    Await partition screenshot.
    OK will try that later . were the partition screenshots not what you wanted?

    mike

    - - - Updated - - -

    zbook said:
    This is a trial and error step:

    Boot using a Windows 10 iso

    type: bcdedit | find "osdevice"

    type: dism /image:M:\ /cleanup-image /revertpendingactions (change M to the applicable drive letter for the partition drive letter seen in the earlier steps: partition=?) ( There is a space between \ / )

    reboot
    Thanks
    I think I have a win 10 ISO somewhere, so after I boot into windows I type the commands into powershell is that correct?
    I tried in my current setup and I got an error message "FIND: Parameter format not correct"
    I tried in cmd and nothing happens.
    sorry if I'm being stupid

    Mike
      My Computer


  3. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit
       #13

    There is a Windows Recovery Environment (RE) on a bootble windows 10 iso.
    Open troubleshooting > command prompt > continue with the prior steps.

    Powershell is available within Windows but not yet in Windows RE.
      My Computer


  4. Posts : 105
    Windows 10 pro
    Thread Starter
       #14

    zbook said:
    There is a Windows Recovery Environment (RE) on a bootble windows 10 iso.
    Open troubleshooting > command prompt > continue with the prior steps.

    Powershell is available within Windows but not yet in Windows RE.
    Ok before I read your last reply. I remembered I had a spare ssd which was a clone of my system a few months back.
    I slotted it into my system and added this to my boot menu.

    Booted up Ok tried bcdedit | find "osdevice"
    I realised that you must have had a typo and tried (bcdedit / find "osdevice")
    tried it cmd and powershell but it won't work in either.
    I did bcdedit /? and find is not in the list of commands for bcdedit.

    Of course as I don't really know what this is supposed to achieve so I might be doing this completely wrong.
    And I assume anyway that I should boot from a usb to get sensible results but I am guessing here ?

    thanks for your patience

    Mike
    Oh BTW one interesting clue that I gained by booting into the clone ssd was that when i restarted it worked !!
    so I think it means all of the hardware is ok except possibly the c drive. ?
      My Computer


  5. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit
       #15

    A bootable windows 10 iso has Windows RE.

    There is also a Windows RE on the computer.
    Sometimes one Windows RE performs differently from the other.
    So using the Windows RE on the iso was suggested.

    If you have a flash drive that you can format you can create a bootable windows 10 iso:
    https://www.microsoft.com/en-us/soft...load/windows10
    Download Windows 10 ISO File
    Create Bootable USB Flash Drive to Install Windows 10


    See if the command can run successfully using Windows RE on the computer using command prompt:
    Boot to Advanced Startup Options in Windows 10


    This is using administrative command prompt (normal windows boot):
    Code:
    C:\WINDOWS\system32>bcdedit | find "osdevice"
    osdevice                partition=C:
    
    C:\WINDOWS\system32>

    Using Windows RE on a bootable flash drive the drive letter may be different from C:
    So the bcdedit command is used.
      My Computer


  6. Posts : 105
    Windows 10 pro
    Thread Starter
       #16

    Ok I Understand now, thanks

    Mike

    - - - Updated - - -

    I booted into the installation usb and got to the command prompt but got the same results as far as the bcdedit / find "osdevice" command. So I tried bcdedit /? and it was the same. no find command in bcdedit

    - - - Updated - - -

    Oh and when I shutdown from there the PC shutdown OK

    and I notice in your last reply you still used the "|" rather than "/" is that a typo ? only I did try that as well but that does not work either

    - - - Updated - - -

    I thought I'd better show you my results from typing it both ways
    Windows won't shut down since last update to V1909  build 18363.900-command.png

    - - - Updated - - -

    I have made a breakthrough of sorts.
    I added a "Verbose" entry in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
    and turned it on.
    When I shut down It showed that it was sticking on Shutting down Hyper-v virtual machine management.
    I temporarily turned off Hyper V in the windows features and shut down. It didn't work at first as even though I had stopped the service as well. it must have restarted as it stuck at the same spot.
    after a forced shutdown though I rebooted and it began the windows update. after a long time updating winver still shows v 1909 though. ??
    am going to test shutting down a few times to see what happens . If it works I'll try to turn hyper V on again
    Thanks

    Mike
      My Computer


  7. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit
       #17

    1) Open disk management > by default some columns are compressed > widen each Status and Volume > make sure the contents within the parenthesis are in full view and that none of the characters are cutoff > view disk 0 > widen this row as needed so that all of the characters are in full view > post an image into the thread
    Disk Management - How to Post a Screenshot of

    2) There are log collectors used in another Ten Forums room.
    Run each V2 and DM and upload results directly into this thread:
    BSOD - Posting Instructions

    3) Indicate whether you prefer to remain with 1909 or upgrade to 2004


    4) Open administrative command prompt and copy and paste (all at one time):

    Code:
    bcdedit /enum all
    bcdedit | find "osdevice"
    reagentc / info
    diskpart
    lis dis
    lis vol
    sel dis 0
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel par 4
    det par
    sel par 5
    det par
    sel par 6
    det par
    sel dis 1
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel par 4
    det par
    sel dis 2
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel dis 3
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel dis 4
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    sel par 4
    det par
    sel par 5
    det par
    sel dis 5
    det dis
    lis par
    sel par 1
    det par
    sel par 2
    det par
    sel par 3
    det par
    5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
      My Computer


  8. Posts : 105
    Windows 10 pro
    Thread Starter
       #18

    Ok here goes! Link to my dropbox folder named TenForums includes V2 and DM results

    Dropbox - TenForums - Simplify your life

    I have started the update to V2004 already. its downloading now!

    Command Promp output.

    Microsoft Windows [Version 10.0.18363.900]
    (c) 2019 Microsoft Corporation. All rights reserved.

    C:\Windows\system32>bcdedit /enum all

    Firmware Boot Manager
    ---------------------
    identifier {fwbootmgr}
    displayorder {bootmgr}
    {cda31b55-ca18-11ea-8cef-806e6f6e6963}
    {7d0adcae-ca6f-11ea-8cf2-806e6f6e6963}
    timeout 1

    Windows Boot Manager
    --------------------
    identifier {bootmgr}
    device partition=\Device\HarddiskVolume1
    path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
    description Windows Boot Manager
    locale en-us
    inherit {globalsettings}
    default {current}
    resumeobject {34f901ae-8241-11ea-8c85-00158315a310}
    displayorder {current}
    {5f78f907-4ce0-11ea-aea1-00158315a310}
    {34f901b0-8241-11ea-8c85-00158315a310}
    toolsdisplayorder {memdiag}
    timeout 10

    Firmware Application (101fffff)
    -------------------------------
    identifier {7d0adcae-ca6f-11ea-8cf2-806e6f6e6963}
    device unknown
    description UEFI: KingstonDataTraveler 3.0, Partition 1

    Firmware Application (101fffff)
    -------------------------------
    identifier {cda31b55-ca18-11ea-8cef-806e6f6e6963}
    device unknown
    path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
    description Windows Boot Manager

    Windows Boot Loader
    -------------------
    identifier {103c6a30-6596-11e8-883f-8c4d0bb2028e}
    device ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{103c6a31-6596-11e8-883f-8c4d0bb2028e}
    path \windows\system32\winload.efi
    description Windows Recovery Environment
    locale en-GB
    inherit {bootloadersettings}
    displaymessage Recovery
    osdevice ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{103c6a31-6596-11e8-883f-8c4d0bb2028e}
    systemroot \windows
    nx OptIn
    bootmenupolicy Standard
    winpe Yes

    Windows Boot Loader
    -------------------
    identifier {28976375-4e4a-11ea-8c0e-b3445158d64e}
    device ramdisk=[\Device\HarddiskVolume3]\Recovery\WindowsRE\Winre.wim,{28976376-4e4a-11ea-8c0e-b3445158d64e}
    path \windows\system32\winload.efi
    description Windows Recovery Environment
    locale en-GB
    inherit {bootloadersettings}
    displaymessage Recovery
    osdevice ramdisk=[\Device\HarddiskVolume3]\Recovery\WindowsRE\Winre.wim,{28976376-4e4a-11ea-8c0e-b3445158d64e}
    systemroot \windows
    nx OptIn
    bootmenupolicy Standard
    winpe Yes

    Windows Boot Loader
    -------------------
    identifier {current}
    device partition=C:
    path \Windows\system32\winload.efi
    description Windows 10
    locale en-us
    inherit {bootloadersettings}
    isolatedcontext Yes
    allowedinmemorysettings 0x15000075
    osdevice partition=C:
    systemroot \Windows
    resumeobject {34f901ae-8241-11ea-8c85-00158315a310}
    nx OptIn
    bootmenupolicy Standard

    Windows Boot Loader
    -------------------
    identifier {34f901b0-8241-11ea-8c85-00158315a310}
    device unknown
    path \Windows\system32\winload.efi
    description Windows Clone
    locale en-US
    osdevice unknown
    systemroot \Windows
    resumeobject {e31849e0-ca18-11ea-8c6a-806e6f6e6963}

    Windows Boot Loader
    -------------------
    identifier {5f78f907-4ce0-11ea-aea1-00158315a310}
    device ramdisk=[C:]\boot\macrium\WA10KFiles\media\sources\boot.wim,{ramdiskoptions}
    path \windows\system32\boot\winload.efi
    description Macrium Reflect System Recovery
    osdevice ramdisk=[C:]\boot\macrium\WA10KFiles\media\sources\boot.wim,{ramdiskoptions}
    systemroot \Windows
    detecthal Yes
    winpe Yes

    Windows Boot Loader
    -------------------
    identifier {890f989b-7d40-11e2-8053-9b1bda41daaa}
    device ramdisk=[unknown]\Recovery\890f989b-7d40-11e2-8053-9b1bda41daaa\Winre.wim,{890f989c-7d40-11e2-8053-9b1bda41daaa}
    path \windows\system32\winload.efi
    description Windows Recovery Environment
    inherit {bootloadersettings}
    osdevice ramdisk=[unknown]\Recovery\890f989b-7d40-11e2-8053-9b1bda41daaa\Winre.wim,{890f989c-7d40-11e2-8053-9b1bda41daaa}
    systemroot \windows
    nx OptIn
    winpe Yes

    Windows Boot Loader
    -------------------
    identifier {faa79e29-81c3-4c2e-8b4b-20715e2d5276}
    device ramdisk=[C:]\Aomei\AomeiBoot.wim,{0b5d695b-f28d-40a9-9277-c15e9dfc9b01}
    description Aomei PE
    osdevice ramdisk=[C:]\Aomei\AomeiBoot.wim,{0b5d695b-f28d-40a9-9277-c15e9dfc9b01}
    systemroot \Windows
    detecthal Yes
    winpe Yes

    Resume from Hibernate
    ---------------------
    identifier {34f901ae-8241-11ea-8c85-00158315a310}
    device partition=C:
    path \Windows\system32\winresume.efi
    description Windows Resume Application
    locale en-us
    inherit {resumeloadersettings}
    isolatedcontext Yes
    allowedinmemorysettings 0x15000075
    filedevice partition=C:
    filepath \hiberfil.sys
    bootmenupolicy Standard
    debugoptionenabled No

    Resume from Hibernate
    ---------------------
    identifier {5868483b-4a5a-11ea-924b-ccb6c4ccb2c6}
    device unknown
    path \Windows\system32\winresume.efi
    description Windows Resume Application
    locale en-GB
    inherit {resumeloadersettings}
    recoverysequence {5868483d-4a5a-11ea-924b-ccb6c4ccb2c6}
    recoveryenabled Yes
    isolatedcontext Yes
    allowedinmemorysettings 0x15000075
    filedevice unknown
    filepath \hiberfil.sys
    bootmenupolicy Standard
    debugoptionenabled No

    Resume from Hibernate
    ---------------------
    identifier {e31849e0-ca18-11ea-8c6a-806e6f6e6963}
    device unknown
    path \Windows\system32\winresume.efi
    description Windows Clone
    locale en-US
    inherit {resumeloadersettings}
    filedevice unknown
    filepath \hiberfil.sys
    debugoptionenabled No

    Windows Memory Tester
    ---------------------
    identifier {memdiag}
    device partition=\Device\HarddiskVolume1
    path \EFI\Microsoft\Boot\memtest.efi
    description Windows Memory Diagnostic
    locale en-us
    inherit {globalsettings}
    badmemoryaccess Yes

    EMS Settings
    ------------
    identifier {emssettings}
    bootems No

    Debugger Settings
    -----------------
    identifier {dbgsettings}
    debugtype Serial
    debugport 1
    baudrate 115200

    RAM Defects
    -----------
    identifier {badmemory}

    Global Settings
    ---------------
    identifier {globalsettings}
    inherit {dbgsettings}
    {emssettings}
    {badmemory}

    Boot Loader Settings
    --------------------
    identifier {bootloadersettings}
    inherit {globalsettings}
    {hypervisorsettings}

    Hypervisor Settings
    -------------------
    identifier {hypervisorsettings}
    hypervisordebugtype Serial
    hypervisordebugport 1
    hypervisorbaudrate 115200

    Resume Loader Settings
    ----------------------
    identifier {resumeloadersettings}
    inherit {globalsettings}

    Device options
    --------------
    identifier {0b5d695b-f28d-40a9-9277-c15e9dfc9b01}
    ramdisksdidevice partition=C:
    ramdisksdipath \Aomei\AomeiBoot.sdi

    Device options
    --------------
    identifier {28976376-4e4a-11ea-8c0e-b3445158d64e}
    description Windows Recovery
    ramdisksdidevice partition=\Device\HarddiskVolume3
    ramdisksdipath \Recovery\WindowsRE\boot.sdi

    Device options
    --------------
    identifier {890f989c-7d40-11e2-8053-9b1bda41daaa}
    description Ramdisk Options
    ramdisksdidevice partition=C:
    ramdisksdipath \Recovery\890f989b-7d40-11e2-8053-9b1bda41daaa\boot.sdi

    Setup Ramdisk Options
    ---------------------
    identifier {ramdiskoptions}
    description Macrium Reflect System Recovery
    ramdisksdidevice partition=C:
    ramdisksdipath \boot\Macrium\boot.sdi

    C:\Windows\system32>bcdedit | find "osdevice"
    osdevice partition=C:
    osdevice ramdisk=[C:]\boot\macrium\WA10KFiles\media\sources\boot.wim,{ramdiskoptions}
    osdevice unknown

    C:\Windows\system32>reagentc / info

    Configures the Windows Recovery Environment (Windows RE) and system reset.

    REAGENTC.EXE <command> <arguments>

    The following commands can be specified:

    /info - Displays Windows RE and system reset configuration
    information.
    /setreimage - Sets the location of the custom Windows RE image.
    /enable - Enables Windows RE.
    /disable - Disables Windows RE.
    /boottore - Configures the system to start Windows RE next time the
    system starts up.
    /setbootshelllink - Adds an entry to the Reset and Restore page in the boot
    menu.

    For more information about these commands and their arguments, type
    REAGENTC.EXE <command> /?.

    Examples:
    REAGENTC.EXE /setreimage /?
    REAGENTC.EXE /disable /?


    C:\Windows\system32>diskpart

    Microsoft DiskPart version 10.0.18362.1

    Copyright (C) Microsoft Corporation.
    On computer: MAIN

    DISKPART> lis dis

    Disk ### Status Size Free Dyn Gpt
    -------- ------------- ------- ------- --- ---
    Disk 0 Online 232 GB 10 GB *
    Disk 1 Online 465 GB 1024 KB *
    Disk 2 Online 447 GB 0 B
    Disk 3 Online 1863 GB 0 B
    Disk 4 Online 3726 GB 0 B *
    Disk 5 Online 223 GB 0 B *

    DISKPART> lis vol

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
    Volume 1 FAT32 Partition 99 MB Healthy System
    Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy
    Volume 3 E Adata ssd NTFS Partition 447 GB Healthy
    Volume 4 S 2TB NTFS Partition 1863 GB Healthy
    Volume 5 A 4TB NTFS Partition 3725 GB Healthy
    Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

    DISKPART> sel dis 0

    Disk 0 is now the selected disk.

    DISKPART> det dis

    Samsung SSD 970 EVO 250GB
    Disk ID: {5E7EBFD5-8B41-4535-A2AD-038FF07AEF63}
    Type : NVMe
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0101)#PCI(0000)#NVME(P00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : Yes
    Pagefile Disk : Yes
    Hibernation File Disk : No
    Crashdump Disk : Yes
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
    Volume 1 FAT32 Partition 99 MB Healthy System

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 System 99 MB 1024 KB
    Partition 2 Primary 221 GB 101 MB
    Partition 3 Recovery 543 MB 222 GB
    Partition 4 Reserved 16 MB 222 GB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
    Hidden : Yes
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 1 FAT32 Partition 99 MB Healthy System

    DISKPART> sel par 2

    Partition 2 is now the selected partition.

    DISKPART> det par

    Partition 2
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 105906176

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot

    DISKPART> sel par 3

    Partition 3 is now the selected partition.

    DISKPART> det par

    Partition 3
    Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
    Hidden : No
    Required: Yes
    Attrib : 0X8000000000000001
    Offset in Bytes: 238476591104

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 7 RAW Partition 543 MB Healthy Hidden

    DISKPART> sel par 4

    Partition 4 is now the selected partition.

    DISKPART> det par

    Partition 4
    Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden : Yes
    Required: No
    Attrib : 0X8000000000000000
    Offset in Bytes: 239045967872

    There is no volume associated with this partition.

    DISKPART> sel par 5

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 6

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 1

    Disk 1 is now the selected disk.

    DISKPART> det dis

    WDC WDS500G2B0C-00PXH0
    Disk ID: {DE31E025-4F86-48B1-9C57-74360D8AB8FF}
    Type : NVMe
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0002)#PCI(0400)#PCI(0000)#NVME(P00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Reserved 15 MB 17 KB
    Partition 2 Primary 465 GB 16 MB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden : Yes
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 17408

    There is no volume associated with this partition.

    DISKPART> sel par 2

    Partition 2 is now the selected partition.

    DISKPART> det par

    Partition 2
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 16777216

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 4

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 2

    Disk 2 is now the selected disk.

    DISKPART> det dis

    ADATA SP550
    Disk ID: 51C2D7D9
    Type : SATA
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 447 GB 1024 KB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : 07
    Hidden: No
    Active: No
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

    DISKPART> sel par 2

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 3

    Disk 3 is now the selected disk.

    DISKPART> det dis

    WDC WD20EZRX-00D8PB0
    Disk ID: 104295D6
    Type : SATA
    Status : Online
    Path : 1
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C01T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 4 S 2TB NTFS Partition 1863 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 1863 GB 1024 KB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 4 S 2TB NTFS Partition 1863 GB Healthy

    DISKPART> sel par 2

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 4

    Disk 4 is now the selected disk.

    DISKPART> det dis

    ST4000DM000-2AE166
    Disk ID: {39282EE0-FD9D-45E5-9C5D-C8CAFB1CF1DB}
    Type : SATA
    Status : Online
    Path : 3
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C03T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 5 A 4TB NTFS Partition 3725 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Reserved 128 MB 17 KB
    Partition 2 Primary 3725 GB 129 MB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden : Yes
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 17408

    There is no volume associated with this partition.

    DISKPART> sel par 2

    Partition 2 is now the selected partition.

    DISKPART> det par

    Partition 2
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 135266304

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 5 A 4TB NTFS Partition 3725 GB Healthy

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 4

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 5

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 5

    Disk 5 is now the selected disk.

    DISKPART> det dis

    KINGSTON SH103S3240G
    Disk ID: {66FBF059-5C85-11EA-8C1B-00158315A310}
    Type : SATA
    Status : Online
    Path : 4
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C04T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 223 GB 1024 KB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

    DISKPART> sel par 2

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det parbcdedit /enum all

    Microsoft DiskPart version 10.0.18362.1

    DISK - Display the properties of the selected disk.
    PARTITION - Display the properties of the selected partition.
    VOLUME - Display the properties of the selected volume.
    VDISK - Displays the properties of the selected virtual disk.

    DISKPART> bcdedit | find "osdevice"

    Microsoft DiskPart version 10.0.18362.1

    ACTIVE - Mark the selected partition as active.
    ADD - Add a mirror to a simple volume.
    ASSIGN - Assign a drive letter or mount point to the selected volume.
    ATTRIBUTES - Manipulate volume or disk attributes.
    ATTACH - Attaches a virtual disk file.
    AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
    BREAK - Break a mirror set.
    CLEAN - Clear the configuration information, or all information, off the
    disk.
    COMPACT - Attempts to reduce the physical size of the file.
    CONVERT - Convert between different disk formats.
    CREATE - Create a volume, partition or virtual disk.
    DELETE - Delete an object.
    DETAIL - Provide details about an object.
    DETACH - Detaches a virtual disk file.
    EXIT - Exit DiskPart.
    EXTEND - Extend a volume.
    EXPAND - Expands the maximum size available on a virtual disk.
    FILESYSTEMS - Display current and supported file systems on the volume.
    FORMAT - Format the volume or partition.
    GPT - Assign attributes to the selected GPT partition.
    HELP - Display a list of commands.
    IMPORT - Import a disk group.
    INACTIVE - Mark the selected partition as inactive.
    LIST - Display a list of objects.
    MERGE - Merges a child disk with its parents.
    ONLINE - Online an object that is currently marked as offline.
    OFFLINE - Offline an object that is currently marked as online.
    RECOVER - Refreshes the state of all disks in the selected pack.
    Attempts recovery on disks in the invalid pack, and
    resynchronizes mirrored volumes and RAID5 volumes
    that have stale plex or parity data.
    REM - Does nothing. This is used to comment scripts.
    REMOVE - Remove a drive letter or mount point assignment.
    REPAIR - Repair a RAID-5 volume with a failed member.
    RESCAN - Rescan the computer looking for disks and volumes.
    RETAIN - Place a retained partition under a simple volume.
    SAN - Display or set the SAN policy for the currently booted OS.
    SELECT - Shift the focus to an object.
    SETID - Change the partition type.
    SHRINK - Reduce the size of the selected volume.
    UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
    master boot record (MBR) signature of a disk.

    DISKPART> reagentc / info

    Microsoft DiskPart version 10.0.18362.1

    ACTIVE - Mark the selected partition as active.
    ADD - Add a mirror to a simple volume.
    ASSIGN - Assign a drive letter or mount point to the selected volume.
    ATTRIBUTES - Manipulate volume or disk attributes.
    ATTACH - Attaches a virtual disk file.
    AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
    BREAK - Break a mirror set.
    CLEAN - Clear the configuration information, or all information, off the
    disk.
    COMPACT - Attempts to reduce the physical size of the file.
    CONVERT - Convert between different disk formats.
    CREATE - Create a volume, partition or virtual disk.
    DELETE - Delete an object.
    DETAIL - Provide details about an object.
    DETACH - Detaches a virtual disk file.
    EXIT - Exit DiskPart.
    EXTEND - Extend a volume.
    EXPAND - Expands the maximum size available on a virtual disk.
    FILESYSTEMS - Display current and supported file systems on the volume.
    FORMAT - Format the volume or partition.
    GPT - Assign attributes to the selected GPT partition.
    HELP - Display a list of commands.
    IMPORT - Import a disk group.
    INACTIVE - Mark the selected partition as inactive.
    LIST - Display a list of objects.
    MERGE - Merges a child disk with its parents.
    ONLINE - Online an object that is currently marked as offline.
    OFFLINE - Offline an object that is currently marked as online.
    RECOVER - Refreshes the state of all disks in the selected pack.
    Attempts recovery on disks in the invalid pack, and
    resynchronizes mirrored volumes and RAID5 volumes
    that have stale plex or parity data.
    REM - Does nothing. This is used to comment scripts.
    REMOVE - Remove a drive letter or mount point assignment.
    REPAIR - Repair a RAID-5 volume with a failed member.
    RESCAN - Rescan the computer looking for disks and volumes.
    RETAIN - Place a retained partition under a simple volume.
    SAN - Display or set the SAN policy for the currently booted OS.
    SELECT - Shift the focus to an object.
    SETID - Change the partition type.
    SHRINK - Reduce the size of the selected volume.
    UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
    master boot record (MBR) signature of a disk.

    DISKPART> diskpart

    Microsoft DiskPart version 10.0.18362.1

    ACTIVE - Mark the selected partition as active.
    ADD - Add a mirror to a simple volume.
    ASSIGN - Assign a drive letter or mount point to the selected volume.
    ATTRIBUTES - Manipulate volume or disk attributes.
    ATTACH - Attaches a virtual disk file.
    AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
    BREAK - Break a mirror set.
    CLEAN - Clear the configuration information, or all information, off the
    disk.
    COMPACT - Attempts to reduce the physical size of the file.
    CONVERT - Convert between different disk formats.
    CREATE - Create a volume, partition or virtual disk.
    DELETE - Delete an object.
    DETAIL - Provide details about an object.
    DETACH - Detaches a virtual disk file.
    EXIT - Exit DiskPart.
    EXTEND - Extend a volume.
    EXPAND - Expands the maximum size available on a virtual disk.
    FILESYSTEMS - Display current and supported file systems on the volume.
    FORMAT - Format the volume or partition.
    GPT - Assign attributes to the selected GPT partition.
    HELP - Display a list of commands.
    IMPORT - Import a disk group.
    INACTIVE - Mark the selected partition as inactive.
    LIST - Display a list of objects.
    MERGE - Merges a child disk with its parents.
    ONLINE - Online an object that is currently marked as offline.
    OFFLINE - Offline an object that is currently marked as online.
    RECOVER - Refreshes the state of all disks in the selected pack.
    Attempts recovery on disks in the invalid pack, and
    resynchronizes mirrored volumes and RAID5 volumes
    that have stale plex or parity data.
    REM - Does nothing. This is used to comment scripts.
    REMOVE - Remove a drive letter or mount point assignment.
    REPAIR - Repair a RAID-5 volume with a failed member.
    RESCAN - Rescan the computer looking for disks and volumes.
    RETAIN - Place a retained partition under a simple volume.
    SAN - Display or set the SAN policy for the currently booted OS.
    SELECT - Shift the focus to an object.
    SETID - Change the partition type.
    SHRINK - Reduce the size of the selected volume.
    UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
    master boot record (MBR) signature of a disk.

    DISKPART> lis dis

    Disk ### Status Size Free Dyn Gpt
    -------- ------------- ------- ------- --- ---
    Disk 0 Online 232 GB 10 GB *
    Disk 1 Online 465 GB 1024 KB *
    Disk 2 Online 447 GB 0 B
    Disk 3 Online 1863 GB 0 B
    Disk 4 Online 3726 GB 0 B *
    * Disk 5 Online 223 GB 0 B *

    DISKPART> lis vol

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
    Volume 1 FAT32 Partition 99 MB Healthy System
    Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy
    Volume 3 E Adata ssd NTFS Partition 447 GB Healthy
    Volume 4 S 2TB NTFS Partition 1863 GB Healthy
    Volume 5 A 4TB NTFS Partition 3725 GB Healthy
    Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

    DISKPART> sel dis 0

    Disk 0 is now the selected disk.

    DISKPART> det dis

    Samsung SSD 970 EVO 250GB
    Disk ID: {5E7EBFD5-8B41-4535-A2AD-038FF07AEF63}
    Type : NVMe
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0101)#PCI(0000)#NVME(P00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : Yes
    Pagefile Disk : Yes
    Hibernation File Disk : No
    Crashdump Disk : Yes
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot
    Volume 1 FAT32 Partition 99 MB Healthy System

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 System 99 MB 1024 KB
    Partition 2 Primary 221 GB 101 MB
    Partition 3 Recovery 543 MB 222 GB
    Partition 4 Reserved 16 MB 222 GB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
    Hidden : Yes
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 1 FAT32 Partition 99 MB Healthy System

    DISKPART> sel par 2

    Partition 2 is now the selected partition.

    DISKPART> det par

    Partition 2
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 105906176

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 0 C System Driv NTFS Partition 221 GB Healthy Boot

    DISKPART> sel par 3

    Partition 3 is now the selected partition.

    DISKPART> det par

    Partition 3
    Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
    Hidden : No
    Required: Yes
    Attrib : 0X8000000000000001
    Offset in Bytes: 238476591104

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 7 RAW Partition 543 MB Healthy Hidden

    DISKPART> sel par 4

    Partition 4 is now the selected partition.

    DISKPART> det par

    Partition 4
    Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden : Yes
    Required: No
    Attrib : 0X8000000000000000
    Offset in Bytes: 239045967872

    There is no volume associated with this partition.

    DISKPART> sel par 5

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 6

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 1

    Disk 1 is now the selected disk.

    DISKPART> det dis

    WDC WDS500G2B0C-00PXH0
    Disk ID: {DE31E025-4F86-48B1-9C57-74360D8AB8FF}
    Type : NVMe
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0002)#PCI(0400)#PCI(0000)#NVME(P00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Reserved 15 MB 17 KB
    Partition 2 Primary 465 GB 16 MB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden : Yes
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 17408

    There is no volume associated with this partition.

    DISKPART> sel par 2

    Partition 2 is now the selected partition.

    DISKPART> det par

    Partition 2
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 16777216

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 2 D NVMe 500gb NTFS Partition 465 GB Healthy

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 4

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 2

    Disk 2 is now the selected disk.

    DISKPART> det dis

    ADATA SP550
    Disk ID: 51C2D7D9
    Type : SATA
    Status : Online
    Path : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C00T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 447 GB 1024 KB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : 07
    Hidden: No
    Active: No
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 3 E Adata ssd NTFS Partition 447 GB Healthy

    DISKPART> sel par 2

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 3

    Disk 3 is now the selected disk.

    DISKPART> det dis

    WDC WD20EZRX-00D8PB0
    Disk ID: 104295D6
    Type : SATA
    Status : Online
    Path : 1
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C01T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 4 S 2TB NTFS Partition 1863 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 1863 GB 1024 KB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 4 S 2TB NTFS Partition 1863 GB Healthy

    DISKPART> sel par 2

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 4

    Disk 4 is now the selected disk.

    DISKPART> det dis

    ST4000DM000-2AE166
    Disk ID: {39282EE0-FD9D-45E5-9C5D-C8CAFB1CF1DB}
    Type : SATA
    Status : Online
    Path : 3
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C03T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 5 A 4TB NTFS Partition 3725 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Reserved 128 MB 17 KB
    Partition 2 Primary 3725 GB 129 MB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden : Yes
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 17408

    There is no volume associated with this partition.

    DISKPART> sel par 2

    Partition 2 is now the selected partition.

    DISKPART> det par

    Partition 2
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 135266304

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 5 A 4TB NTFS Partition 3725 GB Healthy

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 4

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 5

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel dis 5

    Disk 5 is now the selected disk.

    DISKPART> det dis

    KINGSTON SH103S3240G
    Disk ID: {66FBF059-5C85-11EA-8C1B-00158315A310}
    Type : SATA
    Status : Online
    Path : 4
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(0103)#PCI(0001)#ATA(C04T00L00)
    Current Read-only State : No
    Read-only : No
    Boot Disk : No
    Pagefile Disk : No
    Hibernation File Disk : No
    Crashdump Disk : No
    Clustered Disk : No

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

    DISKPART> lis par

    Partition ### Type Size Offset
    ------------- ---------------- ------- -------
    Partition 1 Primary 223 GB 1024 KB

    DISKPART> sel par 1

    Partition 1 is now the selected partition.

    DISKPART> det par

    Partition 1
    Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden : No
    Required: No
    Attrib : 0000000000000000
    Offset in Bytes: 1048576

    Volume ### Ltr Label Fs Type Size Status Info
    ---------- --- ----------- ----- ---------- ------- --------- --------
    * Volume 6 H Kingston 1 NTFS Partition 223 GB Healthy

    DISKPART> sel par 2

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par

    There is no partition selected.
    Please select a partition and try again.

    DISKPART> sel par 3

    The specified partition is not valid.
    Please select a valid partition.

    There is no partition selected.

    DISKPART> det par
    Attached Thumbnails Attached Thumbnails Windows won't shut down since last update to V1909  build 18363.900-discs.png  
      My Computer


  9. Posts : 39,972
    windows 10 professional version 1607 build 14393.969 64 bit
       #19

    1) Had you modified partitions on any of the disks?

    2) The logs displayed a BSOD today:
    2020-07-20T18:26:18.594

    3) Update the thread with the upgrade attempt
      My Computer


  10. Posts : 105
    Windows 10 pro
    Thread Starter
       #20

    zbook said:
    1) Had you modified partitions on any of the disks?

    2) The logs displayed a BSOD today:
    2020-07-20T18:26:18.594

    3) Update the thread with the upgrade attempt
    1)haven't modified partitions since my last re-install which was in March this year.
    2) certainly didn't see any Blue screen yesterday
    3) sorry not sure what you mean

    I didn't let it upgrade last night was just going to do it now. I just have to restart ,do you want me to do that Now?

    - - - Updated - - -

    Ok so I think the update that happened yesterday wes only a minor updat and not the 2004 one.
    I downloaded the 2004 update last night and have now successfully installed it'

    I have created a new V2 log and New DM log after the update and replaced the old logs in my dropbox so I assume the old link will still work.

    Hopefully that's what you wanted me to do.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:13.
Find Us




Windows 10 Forums