Problems with SFC, Dism and Windows Update

Ro Wood · 27 Jun 2020

Greetings!

I have the following problem in progress.
I try to update Windows and give error 0x8007025d, so when I run and SFC it stops at 57 percent.
I wanted to do an inplace to solve the problem however, MediaCreationTool1909 returns me that I have to update to 2004, but the update for 2004 is not yet available for my notebook on Windows Update, the warning that I have to wait for the update to appear is displayed. my device.
"The Windows 10 update of May 2020 is on its way.
When your device is ready you will see the update available on this page. "
I've tried to repair Windows Update in whatever way I found on the internet, so here comes my question, does anyone know how to force Windows Update to update in brute force mode, or redoing my question, how to find out exactly which files are corrupt and how reset them from a Windows installation media, since the Dism command doesn't work either?

The dialogues follow.

There were problems installing some updates, but we'll try again later.

2020-06 Cumulative Update for Windows 10 Version 1909 for x64-based Operating Systems (KB4560960) - Error 0x8007025d

Microsoft Windows [version 10.0.18363.836]
(c) 2019 Microsoft Corporation. All rights reserved.

C: \ windows \ system32> Sfc / scannow

Starting file verification. The process will take a few minutes to complete.

Starting verification phase of system verification.
57% verification completed.

Windows Resource Protection cannot perform the requested operation.

C: \ windows \ system32> Dism / Online / Cleanup-Image / RestoreHealth

Deployment Image Maintenance and Management Tool
Version: 10.0.18362.1

Image Version: 10.0.18363.836

[================= 29.6%]
Error: 605

The specified buffer contains malformed data.

The DISM log file can be found at C: \ windows \ Logs \ DISM \ dism.log

C: \ windows \ system32>

dalchina · 27 Jun 2020

Hi, I understand you have build 1909. Be aware you can freely download every single build of Win 10, but not as you've tried. First, some basic checks, just in case.

a. Check your disk. Download install and run HD Tune v2.55 free e.g. from Softpedia.com. Health and Error scan tabs.
b. If ok, run chkdsk c: /scan from an admin command prompt.

Post back if either fail.

There's a huge list of useful tutorials here.
Windows 10 Tutorial Index

From that see:
Download Windows 10 ISO File

Use the Heidoc downloader to get build 1909.

Log in, rt click and Mount the iso file; open the new drive letter and click setup.exe to attempt an in-place upgrade repair install.

zbook · 27 Jun 2020

Run V2 and DM and upload results directly into this thread:
BSOD - Posting Instructions

https://www.tenforums.com/tutorials/...dows-10-a.html
Change Display Language in Windows 10

How to Upload and Post Screenshots and Files at Ten Forums

Run this Powershell script and post a share link into the thread using one drive, drop box, or google drive:

Code:

function wh   
    {  
        Param ( [parameter (Mandatory = $true)][string]$txt )  
        Write-Host $txt -ForegroundColor Green -BackgroundColor Black -NoNewline  
        ##Example usage wh "Alias for `n Write-Host"  
  
    } ## End function wh  
  
  
function StartScript   
    {  
        ##Locating Temp Dir and writing Transcript  
        $global:tempDir = [System.IO.Path]::GetTempPath()   
        MD $tempDir\LOGS -EA SilentlyContinue   
        CD $tempDir\LOGS  
        $txtCount = Get-Item $tempDir/LOGS/*.TXT -EA SilentlyContinue  
        if((Get-Host).Version.Major -cge 5) ##WIN7 Not Supported  
            {  
                if($txtCount.Count -cge 1)   
                {Start-Transcript -Append -Path $tempDir/LOGS/Event-Search.TXT}   
                Else{Start-Transcript -Path $tempDir\LOGS\Event-Search.TXT}   
            }  
  
        $global:explore = $tempDir + "LOGS\"  
        $global:Ver = "1.6.3"  
        wh "`nLog Collection... (V$Ver)`n"  
  
        #clearing previous actions  
        Stop-Job *  
  
        #Initialize CheckBox Vars to $True/$False  
            $Global:EventsCollect = $true; $Global:SetupDiagCollect = $true  
                $Global:UpdatesCollect = $true; $Global:WLANCollect = $true  
                    $Global:PowerCollect = $true; $Global:GPCollect = $true  
                        $Global:miscCollect = $true; $Global:bingCollect = $true  
                            $Global:eventOut = $false        
        #Clear Jobs  
        Stop-Job *  
        Remove-Job *  
                                          
    } ## End function Start-Script  
  
  
function SetupDiagFunc  
    {  
        wh "`n Grabbing SetupDiag.exe ..."       
        Invoke-WebRequest https://go.microsoft.com/fwlink/?linkid=870142 -OutFile $tempDir\SetupDiag.exe -TimeoutSec 3 -UseBasicParsing  
            #check for successful download  
            if((Get-Item $tempDir\SetupDiag.exe).length -gt 100000)  
                {  
                  wh "`nSuccessful DL!"  
                  wh "`n Invoking SetupDiag.exe ..."  
                  $SetupDiag = {CMD.EXE /C "%temp%\setupdiag.exe /Verbose /Output:%temp%\SetupDiag-Log.txt"}  
  
                  ## Kick-Off SetupDiagJob  
                  Start-Job -Name SetupDiagJob -ScriptBlock $SetupDiag                     
                  
                }Else{Write-Host "`nDownload of SetupDiag.exe Failed!" -BackgroundColor RED }  
  
    } ## End Function SetupDiagFunc  
  
  
function EventSearch  
    {  
    wh "`n Starting EventSearch Job-Function ...`n"  
    ## Gathering Events from System using Get-WinEvent via Job  
    $EventSearchJob =   
        {  
        $evtPaths = Get-Item C:\Windows\System32\Winevt\Logs\*.evtx -Exclude "*PowerShell*",   
            "*known folders*" | Select-Object FullName  
        $i = $evtPaths.Count  
  
        $x = 0 ##For 1st Loop do Until x = i  
        $events = @()  
        $gatherEvents = @()  
        $eventsArray = @()  
        $searchResult = @()  
        $MaxEvents = 99  
  
        #Loading/Gathering Events Loop...  
        do {  
       
            ##Getting Events w/ Get-WinEvent         
            $gatherEvents = Get-WinEvent -Path $evtPaths[$x].FullName -MaxEvents $MaxEvents -EA SilentlyContinue  
            $events = $events + $gatherEvents             
  
            $x++  
              
            }  
             Until ($x -eq $i)      
  
        $x = $x +1 ##Total Events Found!  
          
        $eventsLength = $events.Length ##Total events catalogged!  
          
        $xx = 0  
               
        # Write Event Properties to a row and roll it out - Collapsing Array ...   
        do {  
               $date = $events[$xx].TimeCreated | Get-Date -Format "yyyyMMdd".ToString() -EA SilentlyContinue ##EA SC for Blank Entries  
                  
                $eventRow = new-object PSObject -Property @{  
                Date = $date;  
                Id = $events[$xx].Id;  
                Level = $events[$xx].LevelDisplayName;  
                Provider = $events[$xx].ProviderName;  
               Message = $events[$xx].Message;  
                }  
  
                $cRow = $date + " " + "ID:" +  $events[$xx].Id + " " + "Level:" + $events[$xx].LevelDisplayName + " " + "Provider:" + $events[$xx].ProviderName + " " + "Message:" + $events[$xx].Message   
                $eventsArray += $cRow  
               
                $xx++  
                $d++  
        }  
        Until ($xx -eq $events.Length)  
 
        ##Looking for patterns error or fail in $eventsArray  
        $search = $eventsArray | Select-String -pattern ("error|fail") 
 
        Return $search ## | Write-Output ##Output for job  
  
        } ## End $EventSearchJob  
  
    Start-Job -Name EventSearchJob -ScriptBlock $EventSearchJob  
  
    } ## End function Event-Search  
  
  
function writeSearch  ##   
    {  
        ##Event Logs Cont.  
        MD $tempDir\LOGS\EVTX\ -EA SilentlyContinue 
 
        ##output to file  
        $search | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name -Wrap > TOP-ERRORS.TXT  
        $search > $tempDir\LOGS\SEARCH.TXT  
  
    if($Global:eventOut -eq $True)  
        {  
        $search | Group-Object | Sort-Object Count -Descending |   
            Select-Object -Property Count, Name | Out-GridView -Title "Top `"Errors`" via EVTX - V-$Ver"  
        }  
  
        wh "`n Collecting Matching EVTX Entries ...`n"     
        #Collecting all prev matching EVTX  
        #$evtx = Get-ChildItem C:\Windows\System32\Winevt\Logs\*.evtx  
        $evv = 0  
                  
           $providerName =   
               (($search | Select-String "Provider:.*Message:").Matches.Value -Replace   
                      " Message:", "" -Replace "Provider:", "" | Group-Object ).Name  
              
            #Converting Provider Name to Log Name                 
            $providerName = (($providerName | ForEach-Object {Get-WinEvent -ProviderName $_ -MaxEvents 1 -EA SilentlyContinue}).LogName | Group-Object).Name     
               $providerName = $providerName -replace "Microsoft.", ""  
                  $providerName = $providerName -replace "Windows.", ""  
                     $providerName = $providerName -replace "`/.*$", ""  
                           
                           
                         $evtx = $providerName | foreach{Get-ChildItem "C:\Windows\System32\winevt\logs\*$_*"}  
  
                Do{  
                    COPY $evtx[$evv].PSPath $tempDir\LOGS\EVTX\ 
                       $evv++  
                  }  
                  Until($evv -eq $evtx.Count)  
  
    } #End function writeSearch  
  
  
function GetUpdates  
    {  
        wh "`n Starting Get-WindowsUpdateLog Job-Function ...`n"  
        $updateJob = {get-WindowsUpdateLog}  
         
        if((Get-Host).Version.Major -cge 5) ##Modern Gatherer  
        {  
            Start-Job -Name GetUpdates -ScriptBlock $updateJob  
        }  
          
        ##Legacy Gatherer  
        CP C:\Windows\WindowsUpdate.log $tempDir\LOGS\WindowsUpdate.log  
  
        ##Installed-Updates/Packages 
        Get-WmiObject win32_quickfixengineering > $tempDir\LOGS\Installed_Updates.TXT  
        Get-WmiObject Win32_OperatingSystemQFE >> $tempDir\LOGS\Installed_Updates.TXT  
    DISM /Online /Get-Packages /Format:Table >> $tempDir\LOGS\Installed_Updates.TXT 
  
    } ## End function Get-Updates  
  
       
function PrinterCheck  
    {  
        wh "`n Getting Printer Information ..."  
        get-printer | ft Name, ComputerName, Type, DriverName, PortName, Datatype, Location, DriverName > $tempDir\LOGS\Printers.TXT  
        get-printerDriver | fl >> $tempDir\LOGS\Printers.TXT  
        Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
        Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
        Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors" | Out-File $tempDir\LOGS\Printers.TXT -Append  
        write-output "## CBS ntprint CHECK ##" >> $tempDir\LOGS\Printers.TXT  
        $cbsCheck = (Get-ChildItem C:\Windows\Logs\CBS\*cbs* -Recurse | select-string -Pattern "E_INVALIDARG in eventsXml.*Microsoft-Windows-PrintService")  
        if($cbsCheck.Count -eq 0){Write-Output "## NO MATCHES IN CBS ##" >> $tempDir\LOGS\Printers.TXT} Else{$cbsCheck | Group-Object  >> $tempDir\LOGS\Printers.TXT}  
        write-output "## ntprint.dll CHECK ##" >> $tempDir\LOGS\Printers.TXT  
        (Get-ChildItem C:\Windows\System32\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
        (Get-ChildItem C:\Windows\SysWOW64\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
  
    } ## End function PrinterCheck  
  
  
function UpdateHelper  
    {  
    if((Get-Host).Version.Major -cge 5)  
        {  
            $winupdatelog = get-item $tempDir\LOGS\windows-update.log    ##WIN-10 File  
            MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue | Out-Null  
            CP C:\Windows\Logs\WindowsUpdate\*.etl $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
        }  
            Else{$winupdatelog = get-item $tempDir\LOGS\windowsupdate.log} ##LEGACY File  
  
    $updateError = ($winupdatelog | select-string -pattern "error.*0x........");  
    $updateErrorSplit = $updateError -Split " "  
    $updateErrorCount = (($updateErrorSplit | select-string -pattern "0x........") -Replace "[(),'`.:]", "" -Replace "hr=", "");  
  
    $updateErrorCount | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT -Width 999  
    $updateError >> UPDATE-ERRORS.TXT  
    if($updateError.length -eq 0){"No `"error.*0x........`" patterns Found in Windows-Update.log" | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT}  
  
    ($winupdatelog | Select-String "KB\d\d\d\d\d\d\d" | Select-string "fail") | Out-file $tempDir\LOGS\UPDATE-ERRORS.TXT -Append -width 999  
  
    } ## End function UpdateHelper  
  
  
function getProcesses  
    {  
    wh "`nGetting Active Process ...`n"   
    Get-Process > $tempDir\LOGS\Running-Processes.TXT  
    CMD.EXE /C "tasklist /svc" | Out-File -Append  $tempDir\LOGS\Running-Processes.TXT  
      
    } ## End function getProcesses  
  
  
function GetApps  
    {  
    wh "`n Getting List of Installed Apps...`n"  
    Get-WmiObject -Class Win32_Product | Format-Table -Property Name, Version, Vendor > $tempDir\LOGS\Installed-Apps.TXT  
    Get-AppxPackage | ft Name, Version, InstallLocation, IspArtiallyStaged, SignatureKind, Status >> $tempDir\LOGS\Installed-Apps.TXT  
      
    } ## End function GetApps  
  
  
function SetupLogs  
    {  
    wh "`nGetting Windows Setup Logs Independent of SetupDiage.exe...`n"  
        MD $tempDir\LOGS\SETUP\ -EA SilentlyContinue  
    dir C:\ > $tempDir\LOGS\Dir_Structure.txt  
      
    ## Main Setup Collection  
    if($env:SystemDrive -eq 'C:') ##Verify SystemDrive  
    {  
        $SetupPaths = @()  
  
        $locations = @(  
            'C:\GetCurrent',  
            'C:\$Reset',  
            'C:\$SysReset',  
            'C:\$Windows.~BT',  
            'C:\$Windows.~WS',  
            'C:\Windows\Logs\',  
            'C:\Windows\Panther\',  
            'C:\Windows\inf\',  
            'C:\Windows\System32\LogFiles\',  
            'C:\Windows\System32\SysPrep\',  
            'C:\Windows10Upgrade',  
            'C:\Windows.old\Windows\Panther')  
  
        for($i = 0; $locations.count -gt $i; $i++)  
        {   
            if((get-item $locations[$i] -Force -EA SilentlyContinue).length -gt 0) ##Null Path Check -Force for Hidden  
            {  
                CD $locations[$i]  
                ##Search includes setuperr/setupact only  
                $SetupPaths += Get-ChildItem * -Force -Recurse -Include setuperr.log, setupact.log, miglog.xml, *APPRAISER_Humanreadable.xml -EA SilentlyContinue      
            }  
        }  
  
        $cleanPaths = @()  
  
        for($i = 0; $SetupPaths.count -gt $i; $i++)  
        {  
            $cleanPaths += $SetupPaths[$i].PSParentPath.ToString() -replace "Microsoft\.PowerShell\.Core\\FileSystem\:\:C\:\\", ""  
        }  
  
        CD $tempDir\LOGS\SETUP\  
        MD $cleanPaths -Force  
        CD $tempDir\LOGS\  
  
        for($i = 0; $SetupPaths.count -gt $i; $i++)  
        {  
            $destPath = "$tempDir\LOGS\SETUP\" + $cleanPaths[$i]  
            $copyPathLog = ($SetupPaths[$i].ToString())  
              
            Copy  $copyPathLog -Destination $destPath  
        }  
      
    }Else{Write-Host "`nSystem Drive is not C:... Setup Collection Aborted!`n"}  
    ## End Main Setup Collection  
      
          
        ## Setup Reg Output      
        Get-ChildItem HKLM:\SYSTEM\SETUP\ | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT  
        Get-ChildItem HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE\Me* -recurse -EA SilentlyContinue | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
        Get-Childitem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
  
        ## SetupAct String Search  
  
  
          
         $setupRegx = @("MOUPG SetupHost..Initialize:",  
                        "============================",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Initialize. CmdLine"),  
                        "",  
                        "MOUPG Setup build & Host OS Build:",  
                        "==================================",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Setup build"),  
                        "...",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG      Host OS"),  
                        "",  
                        "Watson Parameters (4&5):",  
                        "=======================",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Watson Bucketing Parameters\[[4-5]\]" ),  
                        "",  
                        "\[0x........\]Error:",  
                        "==================",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "\[0x........\]\[0x.....\]"),  
                        "",  
                        "`"FATAL`":",  
                        "======",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "FATAL" | Select-String -NotMatch "FatalExecutionEngineError" | Select-String -NotMatch "non-fatal"),  
                        "",  
                        "`"Error   `":",  
                        "===========",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Error   "),  
                        "",  
                        "MIGRATE.*DATA:",  
                        "==============",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MIGRATE.*DATA"),  
                        ""             
                        )  
            $q=0  
            Do {$setupRegx[$q] | Out-File $tempDir\LOGS\SETUP\SetupAct-Regex.TXT -Append -Width 999 ##spool out results  
                                  $q++                    
                                            }Until($q -eq $setupRegx.Count)  
  
    } ## End function SetupLogs  
  
  
function powerCFGInfo  
    {  
    MD $tempDir\LOGS\POWER\ -EA SilentlyContinue  | Out-Null  
    wh "`n Grabbing PowerCFG, Sleep & Battery Info ...`n"  
      
    ("`n" + "Available Sleep States (/A): `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg /a | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "-DeviceQuery Wake_Armed: `r" + "`n" +"========================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg -devicequery wake_armed  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "Last Wake (-lastwake):  `r" + "`n" +"=====================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg -lastwake  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "-Requests: `r" + "`n" +"==========`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg -requests  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    $powerList = powercfg -list  
    $powerList | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    $powerActive = $powerList | select-string "\*" | powercfg /QH "$_"   
    ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "Active Power Scheme Details: `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    $powerActive | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
  
    if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support powercfg /battery /sleepstudy  
         {   
           $ifbattery = Get-WmiObject win32_battery  
           if ( $ifbattery.__SERVER.count -cge 1 ) { CMD.EXE /C "powercfg /batteryreport /output %temp%\LOGS\POWER\battery-report.html" }  
           CMD.EXE /C "powercfg /sleepstudy /output %temp%\LOGS\POWER\sleepstudy-report.html"  
         }  
           CMD.EXE /C "powercfg /ENERGY /duration 10 /output %temp%\LOGS\POWER\energy-report.html"         
      
    } ## End function powerCFGInfo  
  
  
function sysProductCheck  
    {  
    wh "`n Getting SystemProductName ...`n"  
    ##SystemInformation Reg   
    reg query HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SystemInformation\ /v SystemProductName  > $tempDir\LOGS\REG_SystemProductName.TXT   
    Get-WmiObject Win32_ComputerSystem > $tempDir\LOGS\WMI_Object_System.TXT  
    Get-WmiObject Win32_ComputerSystemProduct >> $tempDir\LOGS\WMI_Object_System.TXT  
      
    } ## End functions sysProductCheck  
  
  
function showWLAN  
    {  
    wh "Generating NETSH WLAN Report...`n"  
  
    $showWLANjob = {  
                    CMD.EXE /c "netsh wlan show networks mode=ssid > %temp%\LOGS\Network\wlan.txt"  
                    CMD.EXE /c "netsh wlan show networks mode=bssid >> %temp%\LOGS\Network\wlan.txt"  
                    CMD.EXE /c "netsh winhttp show proxy > %temp%\LOGS\Network\proxy.txt"  
                    CMD.EXE /c "netsh wlan show wlanreport & COPY C:\ProgramData\Microsoft\Windows\wlanReport\wlan-report-latest.html %temp%\LOGS\Network\wlan-report-latest.html"   
                    ##WIN7 Does not Support netsh wlanreport                                                    
                    }   
  
    Start-Job -Name showWLAN -ScriptBlock $showWLANjob  
  
    } ## End function sysProductCheck  
  
  
function getGPRESULT  
    {  
    wh "`nGetting GPRESULT...`n"  
    CMD.EXE /C "GPRESULT /V > %temp%\LOGS\GPRESULT.TXT"  
      
    } ## End function getGPRESULT  
  
  
function reservedCheck  
    {       
         
    $reservedJob =   
        {  
        $vol = (mountvol /L | select-string -Pattern "\\\\")  
        $volstring = "mountvol y:" + $vol[0]  
        CMD.EXE /C $volstring  
      
        SLEEP 2  
  
        CMD.EXE /C "CHKDSK y: > %temp%\LOGS\SystemReserved.TXT"  
      
        SLEEP 2 # Pause after drive dismount  
      
        CMD.EXE /C "mountvol y: /D"  
        }  
  
    Start-Job -Name reservedJob -ScriptBlock $reservedJob  
      
    } ## End function reservedCheck  
  
  
function fltmcCheck  
    {  
    wh "`n Getting fltmc Filters ...`n"  
    CMD.EXE /c "fltmc filters > %temp%\LOGS\fltmc_filters.TXT"  
      
    } ## End function fltmcCheck  
  
  
function getDXDiag  
    {  
    wh "`n Grabbing DXDiag Info...`n"  
    C:\Windows\System32\dxdiag /x $explore\DxDiag  
      
    } ## End function getDXDiag  
  
  
function getMSINFO  
    {  
    wh "`n Gathering MSINFO32 ...`n"  
    ## check if msinfo is already gathering - if so stop  
    If((get-process | select-string -Pattern "msinfo").Pattern -eq "msinfo")  
    {Stop-Process -ProcessName msinfo32}  
  
        C:\Windows\System32\msinfo32.exe /nfo $tempDir/LOGS/MSINFO32.NFO  
                 
    } ## End function getMSINFO  
  
  
function getAV  
    {  
     if((Get-Host).Version.Major -cge 5) ##Modern OS Only  
        {  
        wh "`n Grab root\SecurityCenter2 AntivirusProduct ...`n"  
        $avPath = (Get-WmiObject -Namespace root\SecurityCenter2 -Class AntivirusProduct) | % {$_.pathtoSignedProductEXE}  
        "AV Info" + "`n========" | Out-File $tempDir/LOGS/SecurityProductInformation.TXT 
    $avPath | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
        if($avPath[0] -match "exe")  
            {   
                $path = (Get-Item $avPath[0]).PSParentPath  
                Get-Item $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
                Get-Content $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append             
            }  
            Get-ChildItem "HKLM:\SOFTWARE\Policies\Microsoft\Windows Defender\" -recurse -EA SilentlyContinue | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append      
        }  
    } ## End function getAV  
  
  
function getDrivers  
    {  
    wh "`n Grabbing Driver listing via DISM.EXE ...`n"  
        $drivers = cmd.exe /C "dism /online /get-drivers /format:table"  
        $drivers += cmd.exe /C "dism /online /get-drivers /all /format:table"  
        $drivers | Out-File $tempDir/LOGS/DISM-Get-Drivers.TXT  
    wh "`n Done!`n"  
    } ## End Function getDrivers  
  
  
function getMISCLogs  
    {  
        wh "`nCopying misc. logs ...`n"   
        MD $tempDir\LOGS\WER\ -EA SilentlyContinue   
        MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
        CP "C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\*" $tempDir\LOGS\WER\ -Recurse -EA SilentlyContinue  
        CP "C:\Windows\Logs\CBS\*cbs*" $tempDir\LOGS\Windows\Logs\  
        CP "C:\Windows\Logs\DISM\*dism*" $TempDir\LOGS\Windows\Logs\  
        CP "C:\Windows\Logs\WindowsUpdate\*" $TempDir\LOGS\Windows\Logs\WindowsUpdate\  
  
            
        #DMP Collect  
        $dmp = @()  
        $dmp += Get-ChildItem C:\Windows\*.dmp   
        $dmp += (Get-ChildItem C:\Windows\LiveKernelReports\*.dmp -Recurse -EA SilentlyContinue)  
        $dmp += (Get-ChildItem C:\Windows\Minidump\*.dmp -Recurse -EA SilentlyContinue)  
        #Validate empty array  
        if($dmp.length -ne 0)  
            {  
            $dd=0  
                  Do{       
                        If($dmp[$dd].length -lt 2000000)  
                            { $destPath = $dmp[$dd].PSParentPath.Replace('C:\', '').Replace('Microsoft.PowerShell.Core\FileSystem::', '')  
                                MD $destPath -EA SilentlyContinue 
                                    COPY -Path $dmp[$dd].PSPath -Destination $destPath }  
                        $dd++  
                    }  
                    Until($dd -eq $dmp.Count)  
            }  
 
         #disk info 
         "`nGet-Disk:`n=========" > $tempDir\LOGS\Disk-Info.TXT  
         Get-Disk |fl >> $tempDir\LOGS\Disk-Info.TXT 
         "`nGet-Partition:`n==============" >> $tempDir\LOGS\Disk-Info.TXT  
         Get-Partition >> $tempDir\LOGS\Disk-Info.TXT 
         Manage-bde -protectors -get C: >> $tempDir\LOGS\Disk-Info.TXT 
         "`nIO Fail Search:`n===============`n" >> $tempDir\LOGS\Disk-Info.TXT 
         $search | Select-String ".*io.fail.*" | Select-String -NotMatch '0, 0, 0, 0' >> $tempDir\LOGS\Disk-Info.TXT        
  
    } ## End function getMISCLogs  
  
  
function bingCollect  
    {  
        ##O365 Firewall Check & Bing.com diagnostics.asp  
        ##URIs based on Article:   
        ##https://support.office.com/en-us/article/Network-requests-in-Office-365-ProPlus-and-Mobile-eb73fcd1-ca88-4d02-a74b-2dd3a9f3364d  
                
        MD $TempDir\LOGS\Network\ -EA SilentlyContinue  
  
        wh "Performing Bing & O365 URI Check ... `n"  
  
  
              $bingCheck = (Invoke-WebRequest -Uri https://www.bing.com/fdv2/diagnostics.aspx -UseBasicParsing)   
              $bingCheck | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT  
                 
              $URIs = @('api.login.microsoftonline.com',    #0  Standard Reply = 403  
              'api.passwordreset.microsoftonline.com',      #1  Standard Reply = 200  
              'becws.microsoftonline.com',                  #2  Standard Reply = 403  
              'clientconfig.microsoftonline-p.net',         #3  Standard Reply = 404  
              'companymanager.microsoftonline.com',         #4  Standard Reply = 403  
              'device.login.microsoftonline.com',           #5  Standard Reply = 200  
              'graph.microsoft.com',                        #6  Standard Reply = 404  
              'hip.microsoftonline-p.net',                  #7  Standard Reply = 404   
              'hipservice.microsoftonline.com',             #8  Standard Reply = 404  
              'login.microsoft.com',                        #9  Standard Reply = 200  
              'login.microsoftonline.com',                  #10 Standard Reply = 200  
              'logincert.microsoftonline.com',              #11 Standard Reply = 200   
              'loginex.microsoftonline.com',                #12 Standard Reply = 200  
              'login-us.microsoftonline.com',               #13 Standard Reply = 200  
              'login.microsoftonline-p.com',                #14 Standard Reply = 200  
              'login.windows.net',                          #15 Standard Reply = 200  
              'nexus.microsoftonline-p.com',                #16 Standard Reply = 403  
              'passwordreset.microsoftonline.com',          #17 Standard Reply = 200  
              'provisioningapi.microsoftonline.com',        #18 Standard Reply = 403  
              'stamp2.login.microsoftonline.com',           #19 Standard Reply = 200  
              'ccs.login.microsoftonline.com',              #20 Standard Reply = 401  
              'ccs-sdf.login.microsoftonline.com',          #21 Standard Reply = 401  
              'accounts.accesscontrol.windows.net',         #22 Standard Reply = 200  
              'secure.aadcdn.microsoftonline-p.com',        #23 Standard Reply = 400  
              'windows.net',                                #24 Standard Reply = 200  
              'phonefactor.net',                            #25 Standard Reply = 200  
              'account.activedirectory.windowsazure.com',   #26 Standard Reply = 404  
              'secure.aadcdn.microsoftonline-p.com',        #27 Standard Reply = 400  
              'login.windows.net',                          #28 Standard Reply = 200  
              'provisioningapi.microsoftonline.com',        #29 Standard Reply = 403  
              'mscrl.microsoft.com',                        #30 Standard Reply = 400  
              'secure.aadcdn.microsoftonline-p.com',        #31 Standard Reply = 400  
              'windowsupdate.microsoft.com',                #32 Standard Reply = 200  
              'update.microsoft.com',                       #33 Standard Reply = 200  
              'au.download.windowsupdate.com',              #34 Standard Reply = 200  
              'download.windowsupdate.com',                 #35 Standard Reply = 200  
              'download.microsoft.com',                     #36 Standard Reply = 200  
              'tlu.dl.delivery.mp.microsoft.com');          #37 Standard Reply = 403  
          
                 
              $count = 0;  
              $queryResult =@{};  
                 
              Write-Host "Checking URIs .." -NoNewline  
                 
              Do {           
                      Try{  
                      $queryResult[$count] = (Invoke-WebRequest -Uri ("http:`/`/" + $URIs[$count]) -Method Head -UseBasicParsing -TimeoutSec 2).RawContent  
                         }Catch{ $catch = $_ }  
                 
                          if($queryResult[$count].Count -eq 0)  
                                  {$queryResult[$count] = ($catch[$catch.count -1].ToString()).Replace("`n", " ")}                                     
                      Write-Host "." -NoNewline           
                      $count++         
                  }Until ($count -eq ($URIs.Count));                            
              Write-Host "."  
                  
                  Get-Date | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                  $queryResult | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                    
        Write-Host " Bing Check", `n, "==========" | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
        
              wh "`n`n`n`URL Check Finished...`n"   
    }  
  
  
function smbConfig  
{  
  
    $CMDs =  
    {   cmd.exe /c "net config server"    
        cmd.exe /c "net config workstation"  
        Get-SmbClientNetworkInterface  
        Get-SmbServerConfiguration  
        Get-SmbClientConfiguration  
        Get-ChildItem "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer"   
        Get-NetAdapterAdvancedProperty | ft }  
  
    ForEach-Object{Invoke-Command $CMDs | Out-File $TempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
  
    $share = Get-SmbShare  
  
    ForEach-Object{Get-SmbShareAccess $share.Name | ft  | Out-File $tempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
  
} ## End Function smbConfig  
  
  
function regLang  
    {       
        DISM.EXE /Online /Get-Intl  | Out-File $tempDir\LOGS\Reg-Lang.TXT  
        "`n","Get-WinUserLanguageList","=======================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        Get-WinUserLanguageList     | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        "`n","Get-WinLanguageBarOption","========================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        Get-WinLanguageBarOption    | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
    }  
  
  
function autoRotate  
    {  
        Get-ChildItem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\Auto* | Out-File $tempDir\LOGS\AutoRotate.TXT  
    }  
  
  
function checkBoxes  
   {  
        Add-Type -AssemblyName System.Windows.Forms  
        Add-Type -AssemblyName System.Drawing  
  
        $Global:form = New-Object System.Windows.Forms.Form  
        $Global:form.Text = "LOGS-V$ver"  
        $Global:form.Size = New-Object System.Drawing.Size(300,400)  
        $Global:form.StartPosition = 'CenterScreen'  
  
        $OKButton = New-Object System.Windows.Forms.Button  
        $OKButton.Location = New-Object System.Drawing.Point(100,300)  
        $OKButton.Size = New-Object System.Drawing.Size(75,23)  
        $OKButton.Text = 'OK'  
        $OKButton.DialogResult = [System.Windows.Forms.DialogResult]::OK  
        $Global:form.AcceptButton = $OKButton  
        $Global:form.Controls.Add($OKButton)  
         
        $Global:form.ControlBox = $false  
          
            $Global:boxNum = 1  
            $Global:checkBox = @{} #hash for $checkBox  
            $tag = @{} #hash for $label  
            $Global:Box = @{}  
  
            function createCheckBox   
                {  
                    Param ( [parameter (Mandatory = $true)][string]$name,  
                            [parameter (Mandatory = $true)][string]$label )  
                      
                    $drawingPoint = (50 + ($boxNum *25))  
  
                    $Global:checkBox[$boxNum] = New-Object System.Windows.Forms.CheckBox  
                    $Global:checkBox[$boxNum].Location = New-Object System.Drawing.Point(10,$drawingPoint)  
                    $Global:checkBox[$boxNum].Size = New-Object System.Drawing.Size(15,15)  
                    $Global:checkBox[$boxNum].Text = ''  
                    $Global:checkBox[$boxNum].Checked = $true  
                    $Global:form.Controls.Add($checkBox[$boxNum])  
                    #SetupDiag Label  
                    $tag[$boxNum] = New-Object System.Windows.Forms.Label  
                    $tag[$boxNum].Location = New-Object System.Drawing.Point(40,$drawingPoint)  
                    $tag[$boxNum].Size = New-Object System.Drawing.Size(280,20)  
                    $tag[$boxNum].Text = "$label"  
                    $Global:form.Controls.Add($tag[$boxNum])  
  
                    $Global:boxNum ++  
                  
                } #End nested function createCheckBox   
            
            createCheckBox -name "EV" -label "EventSearch EventLog Helper"       #1  
            createCheckBox -name "SD" -label "SetupDiag.EXE Setup Diagnostics"   #2  
            createCheckBox -name "WU" -label "Get-WindowsUpdateLog Collection"   #3  
            createCheckBox -name "IP" -label "Network Information"               #4  
            createCheckBox -name "PW" -label "POWERCFG. Sleep & Battery Info"    #5  
            createCheckBox -name "GP" -label "GPResult Info"                     #6  
            createCheckBox -name "MS" -label "General Machine Info"              #7  
            createCheckBox -name "EO" -label "EventSearch Out-GridView"          #8            
                 
            #Checkbox State Changes               
            $Global:checkBox[1].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[1].checked -eq $True){ $Global:EventsCollect = $true ; Write-Host "." -nonewline} Else{ $Global:EventsCollect = $false }  
                              
                    })             
            $Global:checkBox[2].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[2].checked -eq $True){ $Global:SetupDiagCollect = $true ; Write-Host "." -nonewline} Else{ $Global:SetupDiagCollect = $false }  
                              
                    })  
            $Global:checkBox[3].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[3].checked -eq $True){ $Global:UpdatesCollect = $true ; Write-Host "." -nonewline} Else{ $Global:UpdatesCollect = $false }  
                              
                    })  
            $Global:checkBox[4].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[4].checked -eq $True){ $Global:WLANCollect = $true ; Write-Host "." -nonewline} Else{ $Global:WLANCollect = $false }  
                              
                    })  
  
            $Global:checkBox[5].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[5].checked -eq $True){ $Global:PowerCollect = $true ; Write-Host "." -nonewline} Else{ $Global:PowerCollect = $false }  
                              
                    })  
            $Global:checkBox[6].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[6].checked -eq $True){ $Global:GPCollect = $true ; Write-Host "." -nonewline} Else{ $Global:GPCollect = $false }  
                              
                    })  
            $Global:checkBox[7].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[7].checked -eq $True){ $Global:miscCollect = $true ; Write-Host "." -nonewline} Else{ $Global:miscCollect = $false }  
                              
                    })  
  
             $Global:checkBox[8].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[8].checked -eq $True){ $Global:eventOut = $true ; $Global:checkBox[1].checked = $true; Write-Host "x" -nonewline} Else{ $Global:eventOut = $false }  
                              
                    })  
                                           
        $Global:checkBox[8].Checked = $false  
        $mainText = New-Object System.Windows.Forms.Label  
        $mainText.Location = New-Object System.Drawing.Point(62,30)  
        $mainText.Size = New-Object System.Drawing.Size(260,20)  
        $mainText.Text = 'Choose which logs to collect:'  
        $Global:form.Controls.Add($mainText)  
        $result = $Global:form.ShowDialog()  
        SLEEP 1  #testing Topmost lag  
        $Global:form.Topmost = $true  
  
        #OK Button ...   
        if ($result -eq [System.Windows.Forms.DialogResult]::OK)  
        {  
            $x = $textBox.Text  
            $x  
        }       
  
    } #End function checkBoxes  
  
  
Function werHint  
{  
    $WERs = Get-ChildItem $tempDir\LOGS\WER\*.wer -Recurse  
  
    $WERArray = @()  
  
    $Date = $WERs | Select-String -pattern "eventtime=" | % {$_ -Replace("C:.*EventTime=", "")}  
    $eventType = $WERs | Select-String -pattern "EventType=" | % {$_ -Replace("C:.*EventType=", "")}  
    $Sig0Nam = $WERs | Select-String -pattern "Sig\[0\].Name" | % {$_ -Replace("C:.*Sig\[0\].Name=", "")}  
    $Sig0Val = $WERs | Select-String -pattern "Sig\[0\].Value" | % {$_ -Replace("C:.*Sig\[0\].Value=", "")}  
    $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
    $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
    $Sig4 = $WERs | Select-String -pattern "Sig\[4\].Value" | % {$_ -Replace("C:.*Sig\[4\].Value=", "")}  
  
    #ConvertDateTime  
    $epoch = [datetime]"01/01/1601 00:00"  
    $date = $date | foreach{$epoch.AddSeconds($_/10000000)}   
    $convertedDate = foreach($Date in $Date) {Get-Date $Date -Format G}  
  
    $WERarray = 0..($convertedDate.Length -1) | Select-Object @{n="Id";e={$_}},   
        @{n="Date";e={$convertedDate[$_]}}, @{n="EventType";e={$eventType[$_]}},  
            @{n="S0-Name";e={$Sig0Nam[$_]}}, @{n="S0-Value";e={$Sig0Val[$_]}}, @{n="S3";e={$Sig3[$_]}},   
                @{n="S4";e={$Sig4[$_]}}  
  
    $WERArray |Sort-Object -Descending Date | ft -autosize Date, EventType, S0-Name, S0-Value, S3, S4  |   
        Out-File $tempDir\LOGS\WER-SUMMARY.TXT -Width 500  
  
} ## End Function werHint  
  
  
  
### FUNCTIONS_INIT ###   
  
        $Script:Cancel = @{}  
  
        StartScript #function  
        checkBoxes  
          
        ## SetupDiagCollect   #2  
        if($Global:SetupDiagCollect -eq $True)  
            {  
            SetupDiagFunc #function & job   
            wh "...`n"  
            }  
        ## EventSearch         #1  
        if($Global:EventsCollect -eq $True)  
            {  
            EventSearch #function & job  
            wh "...`n"  
            }  
  
        ## Get-WindowsUpdate   #3  
        if($Global:UpdatesCollect -eq $True)  
            {  
            GetUpdates #function & job  
            wh "...`n`n"  
            }  
  
        ## WLAN/Wifi Collect    #4  
        if($Global:WLANCollect -eq $True)      
            {  
            bingCollect #function  
            wh "...`n"  
            showWLAN #function & job   
            wh "...`n"  
            smbConfig #function  
            }  
  
        ## Power/Battery Collect:#5  
        if($Global:PowerCollect -eq $True)  
            {  
            powerCFGInfo #function - make job takes a min  
            wh "...`n"  
            }  
  
        ## GPRESULT Collection:  #6  
        if($Global:GPCollect -eq $True)  
            {  
            getGPRESULT #function  
            wh "...`n"  
            }  
  
        ## Misc Logs Collection: #7        
        if($Global:miscCollect -eq $True)  
            {  
            getMSINFO #function & job  
                wh "...`n"  
            PrinterCheck #function  
                wh "...`n"  
            getProcesses #function  
                wh "...`n"  
            getApps #function - make job - takes a min  
                wh "...`n"  
            SetupLogs #function  
                wh "...`n"       
            sysProductCheck #function  
                wh "...`n"                 
            reservedCheck #function  
                wh "...`n"  
            fltmcCheck #function  
                wh "...`n"  
            getDXDiag #function  
                wh "...`n"  
            regLang #function  
                wh "...`n"  
            autoRotate #function  
            getMISCLogs #function  
                wh "...`n"  
            getDrivers #function  
                wh "...`n"   
            getAV #function  
                wh "...`n"            
             }  
        
  
#### RECEIVING JOBS SECTION ###...   
  
        #EventSearchJob  
        if($Global:EventsCollect -eq $True)  
        {          
            wh "`nWaiting for EventSearchJob to complete...`n"  
  
            Receive-Job -Name EventSearchJob -OutVariable eventSearch -Wait   
            $search = $eventSearch.Line  
        }  
  
  
        if($Global:SetupDiagCollect -eq $True)  
        {  
            #SetupDiagJob - Receive-Job  
            $stamp = (Get-Date -format "hh:mm tt")  
            wh "`nWaiting for SetupDiagJob to complete..."  
            wh "`nTime Stamp: $stamp"  
            wh "`nThis can take up to 10 minutes ..."  
  
            Do{  
              SLEEP 15  
                wh "."  
                if((Get-Job -name SetupDiagJob).State -eq "Completed")  
                    { Receive-Job -Name SetupDiagJob  
                           wh "`nSetupDiag Completed!"                         
                        Break                      }  
                                }Until($Cancel.SetupDiag -eq $True)  
            wh `n  
                                               
            #Receive file and copy  
            Receive-Job -Name SetupDiagJob -Wait   
            Copy-Item $tempDir\Logs*.zip $tempDir\LOGS\SetupDiag-Log.zip  
            Copy-Item $tempDir\setupdiag*.log $tempDir\LOGS\  
            Remove-Item $tempDir\Logs*.zip  
        }  
  
       
        if($Global:UpdatesCollect -eq $True)  
        {  
            #GetUpdates Job via:  
            #UpdateHelper <--- GetUpdates Job has to finish first!  
            #Checking Status of GetUpdates Job...  
            wh "Checking Status of GetUpdates Job...`n"  
            If ((Get-Job -Name GetUpdates).State -eq "Failed")  
                { wh "`nGetUpdates Job Failed!`n" }  
                    Else{  
                            Receive-Job -Name GetUpdates -wait  
                            Move $env:USERPROFILE\Desktop\WindowsUpdate.log $TempDir\LOGS\Windows-Update.log -Force  
                            wh "`n Writing Update Helper Info to UPDATE-ERRORS.TXT ... `n"  
                            UpdateHelper #run the update helper function  
                        }               
        } #End getting GetUpdates-job       
  
        #Finishing EventSearch  
        if($Global:EventsCollect -eq $True)  
            {  
                writeSearch #function  
            }  
  
#Wait on MSINFO...  
if($Global:miscCollect -eq $True)  
{  
    wh "`n Waiting for MSINFO32 to Complete ...`n"  
    do{ start-sleep 1 }  
    Until((get-process | select-string -Pattern "msinfo").Pattern -cne "msinfo")  
        werHint #function  
}  
  
  
if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support Transcript  
    {  
  
Stop-Transcript   
  
        do{  
    start-sleep 1  
    }  
    Until((get-item $tempDir\LOGS\Event-Search.TXT).Length -cne 0)  
      
    }  
  
wh "`nLog Collection Completed! `nLogs are available in %temp%\LOGS\`n"    
wh "`nHit Any Key or Close ...`n"  
  
Start-Sleep 1  
  
Start Explorer.exe $explore  
  
PAUSE  
  
## LOGS.PS1 1.6.3  ##     
## JOHNEM 8-2019 ##   
## EOF ##

Ro Wood · 27 Jun 2020

Greetings!

I performed all the suggested procedures, a directory and two compressed files were generated, I compressed the directory generated by the Power Shell script, and then I compressed the three together and uploaded it to my Dropbox.
Follow the link...

Dropbox - Thunderbird Windows Update Logs.zip - Simplify your life

I changed the system language, made new logs and created a new file in Dropbox.

Thank you.

OldNavyGuy · 27 Jun 2020

dalchina said:

Use the Heidoc downloader to get build 1909..

Rufus can also be used to download previous ISOs, as well as making bootable USB installation media.

Rufus - The Official Website (Download, New Releases)

zbook · 27 Jun 2020

The logs could not be scanned.
Please use English as the default language.
See the tutorials in post #3.

dalchina · 27 Jun 2020

Have you considered an in-place upgrade repair install as post #2?

dalchina · 28 Jun 2020

Sorry chkdsk.

a. was a disk check
b. a file system check

then an in-place upgrade repair.

Ro Wood · 28 Jun 2020

@zbook

I changed the system language, made new logs and created a new file in Dropbox.

@dalchina

I checked the disk and the file system.
Using the iso the default windows installation screen is loaded does not say if it will keep my files, programs and settings, as the MediaCreationTool screen does ...
How do you know if I'm not going to lose everything?

dalchina · 28 Jun 2020

How do you know if I'm not going to lose everything?

If you log in then start the procedure, you are NOT doing a clean install.

a. because I said so in bold because of the number of times this is asked, and to try to preclude this question yet again and save myself a lot of typing.
b. because the tutorial on in-place upgrade repair says so
c. would you ask the same question when applying a feature update to the next build? It's the same mechanism as that.
d. from experience - mine and that of many others.

All that said, it's a major change.

Take precautions and as is so so tirelessly recommended on tenforums, create a current disk image just in case. E,g, Macrium Reflect (free) + large enough external storage.