New
#41
Hmmm......updated the driver. Was online, went to go to another site and got the sorry, that ain't happening page. Went into the Device Manager...no adapter....
Rebooted, said it was there. Tried to log on using Chrome, sorry can't load that page. Check Your Firewall etc. Plugged it into the modem...no troubles at all....
I pulled the wifi card out and am using the USB dongle, so far no troubles. Just wondering if there is a way for me to uninstall all the drivers for the 3165 card? Don't know what our schedule looks like this week but if I get a chance I may run into Spokane and try to find a computer shop that has different one. May just go the easy route and search the internet....any particular one I should look for?
Cute pup.
If you go into device manager and show hidden devices you should see the 3165 listed and you can remove.
I believe your modem is a modem router combo.
Wireless System Information Summary
(Time: 2/26/2018 11:41:24 AM PacificStandard Time)
=======================================================================
============================== SHOWDRIVERS ===========================
=======================================================================
Interface name: Wi-Fi 2
Driver : NETGEARWNDA3100v3 N600 Wireless Dual Band USB Adapter
Vendor : NETGEARInc.
Provider : Netgear
Date :12/8/2014
Version :5.1.20.0
INF file em52.inf
Type : NativeWi-Fi Driver
Radio types supported : 802.11b802.11a 802.11g 802.11n
FIPS 140-2 mode supported : Yes
802.11w Management Frame Protectionsupported : Yes
Hosted network supported : Yes
Authentication and cipher supportedin infrastructure mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA-Enterprise TKIP
WPA-Enterprise CCMP
WPA-Personal TKIP
WPA-Personal CCMP
WPA2-Enterprise TKIP
WPA2-Enterprise CCMP
WPA2-Personal TKIP
WPA2-Personal CCMP
Vendordefined TKIP
Vendordefined CCMP
WPA2-Enterprise Vendor defined
WPA2-Enterprise Vendor defined
Vendordefined Vendor defined
Vendordefined Vendor defined
Vendordefined Vendor defined
Authentication and cipher supportedin ad-hoc mode:
Open None
Open WEP-40bit
Open WEP-104bit
Open WEP
WPA2-Personal CCMP
Vendordefined Vendor defined
Wireless Display Supported: Yes(Graphics Driver: Yes, Wi-Fi Driver: Yes)
=======================================================================
============================= SHOWINTERFACES =========================
=======================================================================
There is 1 interface on the system:
Name : Wi-Fi 2
Description : NETGEARWNDA3100v3 N600 Wireless Dual Band USB Adapter
GUID :60ba9969-26bf-475a-ad90-695aff2e56bd
Physical address :a0:40:a0:74:4b:88
State : connected
SSID : ATF1
BSSID :1c:74:0d:6a:39:a9
Network type :Infrastructure
Radio type : 802.11n
Authentication :WPA2-Personal
Cipher : CCMP
Connection mode : AutoConnect
Channel : 1
Receive rate (Mbps) : 600
Transmit rate (Mbps) : 144
Signal : 100%
Profile : ATF1
Hosted network status : Notavailable
=======================================================================
=========================== SHOW HOSTEDNETWORK =======================
=======================================================================
Hosted network settings
-----------------------
Mode : Allowed
Settings : <Notconfigured>
Hosted network status
---------------------
Status : Notavailable
=======================================================================
============================= SHOWSETTINGS ===========================
=======================================================================
Wireless LAN settings
---------------------
Show blocked networks in visiblenetwork list: No
Only use GP profiles on GP-configurednetworks: No
Hosted network mode allowed in WLAN service:Yes
Allow shared user credentials fornetwork authentication: Yes
Block period: Not Configured.
Auto configuration logic is enabledon interface "Wi-Fi 2"
MAC randomization not available oninterface Wi-Fi 2
=======================================================================
============================== SHOWFILTERS ===========================
=======================================================================
Allow list on the system (group policy)
---------------------------------------
<None>
Allow list on the system (user)
-------------------------------
<None>
Block list on the system (group policy)
---------------------------------------
<None>
Block list on the system (user)
-------------------------------
<None>
=======================================================================
=========================== SHOWCREATEALLUSER ========================
=======================================================================
Everyone is allowed to create all userprofiles.
=======================================================================
============================= SHOWPROFILES ===========================
=======================================================================
Profiles on interface Wi-Fi 2:
Group policy profiles (read only)
---------------------------------
<None>
User profiles
-------------
All User Profile : ATF1
=======================================================================
========================== SHOWPROFILES NAME=* =======================
=======================================================================
Profile ATF1 on interface Wi-Fi 2:
=======================================================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : WirelessLAN
Name : ATF1
Control options :
Connection mode : Connectautomatically
Network broadcast : Connectonly if this network is broadcasting
AutoSwitch : Do notswitch to other networks
MAC Randomization : Disabled
Connectivity settings
---------------------
Number of SSIDs : 1
SSID name : "ATF1"
Network type :Infrastructure
Radio type : [ AnyRadio Type ]
Vendor extension : Notpresent
Security settings
-----------------
Authentication :WPA2-Personal
Cipher : CCMP
Authentication :WPA2-Personal
Cipher : GCMP
Security key : Present
Cost settings
-------------
Cost :Unrestricted
Congested : No
Approaching Data Limit : No
Over Data Limit : No
Roaming : No
Cost Source : Default
=======================================================================
======================= SHOW NETWORKSMODE=BSSID ======================
=======================================================================
Interface name : Wi-Fi 2
There are 1 networks currently visible.
SSID 1 : ATF1
Network type :Infrastructure
Authentication :WPA2-Personal
Encryption : CCMP
BSSID 1 :08:00:0d:6a:39:a9
Signal : 100%
Radio type : 802.11n
Channel : 1
Basic rates (Mbps) : 1 2 5.511
Other rates (Mbps) : 6 9 12 1824 36 48 54
BSSID 2 :1c:74:0d:6a:39:a9
Signal : 100%
Radio type : 802.11n
Channel : 1
Basic rates (Mbps) : 1 2 5.511
Other rates (Mbps) : 6 9 12 1824 36 48 54
=======================================================================
======================= SHOW INTERFACECAPABILITIES ===================
=======================================================================
Wireless System Capabilities
----------------------------
Number of antennas connected to the802.11 radio (value not available)
Max number of channels the devicecan operate on, simultaneously (value not available)
Co-existence Support : Unknown
Wireless Device Capabilities
----------------------------
Interface name: Wi-Fi 2
WDI Version (Windows) : 0.0.0.0
WDI Version (IHV) : 0.0.0.0
Firmware Version :
Station : Supported
Soft AP : Supported
Network monitor mode : Supported
Wi-Fi Direct Device : Supported
Wi-Fi Direct GO : Supported
Wi-Fi Direct Client : Supported
Protected Management Frames : Supported
DOT11k neighbor report : Unknown
ANQP Service Information Discovery : Not Supported
Action Frame : Not Supported
Diversity Antenna : Unknown
IBSS : Supported
Promiscuous Mode : Supported
P2P Device Discovery : Not Supported
P2P Service Name Discovery : Not Supported
P2P Service Info Discovery : Not Supported
P2P Background Discovery : Not Supported
P2P GO on 5 GHz : Unknown
ASP 2.0 Service Name Discovery : Not Supported
ASP 2.0 Service InformationDiscovery : Not Supported
IP Docking Capable : Not Supported
FIPS : Supported
Instant Connect : Not Supported
Dx Standby NLO : Not Supported
Extended Channel SwitchAnnouncement : Unknown
Function Level Reset : Not Supported
Platform Level Reset : Not Supported
Bus Level Reset : Not Supported
MAC Randomization : Not Supported
Fast Transition : Not Supported
MU-MIMO : Unknown
Miracast Sink : Unknown
BSS Transition (802.11v) : Unknown
IHV Extensibility Module Configured : Not Supported
Number of Tx Spatial Streams : 0
Number of Rx Spatial Streams : 0
Number of Concurrent ChannelsSupported : 2
P2P GO ports count : 1
P2P Clients Port Count : 2
P2P Max Mobile AP Clients : 8
Max ANQP Service AdvertisementsSupported : 0
Co-existence Support : Unknown
There does not seem to be any other networks in range.
Can you change the modem / router to channel 6. It does show a signal strength of 100% so that is good although not sure where you are in relationship to modem / router.
Notice that your USB dongle is capable of some impressive receive rates yet your modem / router maximum speed is 54Mbps, basically a G class radio.
Could you share what device you have as a modem? How is your internet provided, cable, cellular, etc?
Doug, If You have your own modem/router, you can check for a firmware update for your modem/router.
Centurylink uses DSL 2.4 GHz and their max speed is only 54Mbps.
Modem is a Zyxel C1100Z. ISP is Century Link. Slowest DSL they offer, 1.5MBPS. We live out in the country, every one has 5 acres. My neighbors network will often show up. CL knows of how overloaded the old copper system is, they are claiming that we will be on a fiber optic network by July 2018. But they also claimed that for January 2017. I am sitting about 20 feet from the modem, with 0 obstructions.
I switched i over to channel 6, no different.
Like I have mentioned, my old Linux machine has zero issues uploading images..and staying connected. Now I get a lot of DNS, server, that page is not available errors.