Windows 10: Very poor connectivity...

Page 5 of 6 FirstFirst ... 3456 LastLast
  1.    25 Feb 2018 #41

    Click image for larger version. 

Name:	27331598_10207973468172959_7419831750999061701_n.jpg 
Views:	1 
Size:	249.6 KB 
ID:	178602One of our pups....
      My ComputerSystem Spec

  2.    25 Feb 2018 #42

    Hmmm......updated the driver. Was online, went to go to another site and got the sorry, that ain't happening page. Went into the Device Manager...no adapter....Click image for larger version. 

Name:	huh.png 
Views:	1 
Size:	116.7 KB 
ID:	178605

    Rebooted, said it was there. Tried to log on using Chrome, sorry can't load that page. Check Your Firewall etc. Plugged it into the modem...no troubles at all....
      My ComputerSystem Spec

  3.    26 Feb 2018 #43

    I pulled the wifi card out and am using the USB dongle, so far no troubles. Just wondering if there is a way for me to uninstall all the drivers for the 3165 card? Don't know what our schedule looks like this week but if I get a chance I may run into Spokane and try to find a computer shop that has different one. May just go the easy route and search the internet....any particular one I should look for?
      My ComputerSystem Spec

  4. Caledon Ken's Avatar
    Posts : 10,553
    Windows 10 Pro x64 Build 1803
       26 Feb 2018 #44

    Cute pup.

    If you go into device manager and show hidden devices you should see the 3165 listed and you can remove.

    I believe your modem is a modem router combo.
      My ComputerSystem Spec

  5.    26 Feb 2018 #45

    Caledon Ken said: View Post
    Cute pup.

    If you go into device manager and show hidden devices you should see the 3165 listed and you can remove.

    I believe your modem is a modem router combo.
    I just physically removed the wifi card. Still having problems. One of which was the USB dongle was set to turn off. Changed this setting...but without rebooting the laptop I still did not have any internet....
      My ComputerSystem Spec

  6.    26 Feb 2018 #46

    Caledon Ken said: View Post
    How old is your router? Not saying it is the problem but they do wear out. My Netgear r6300 would have constant drops on 2.4 band. Replaced router and that issue was fixed.

    I knew something was wrong as I test speed while I was in room with router. I used speedtest.net, just the test, not any of the other crap that pops up. Was getting 15Mbps or less.

    Interesting that your dongle also suffers outages.

    You could also run, from command prompt(admin)

    netsh wlan show all | clip

    The | clip puts the output on the clipboard. Then open notepad and press crtl-V or paste.

    This will show you what your dongle sees. By pasting in notepad you can save and look at report.
    Wireless System Information Summary
    (Time: 2/26/2018 11:41:24 AM PacificStandard Time)




    =======================================================================
    ============================== SHOWDRIVERS ===========================
    =======================================================================




    Interface name: Wi-Fi 2


    Driver : NETGEARWNDA3100v3 N600 Wireless Dual Band USB Adapter
    Vendor : NETGEARInc.
    Provider : Netgear
    Date :12/8/2014
    Version :5.1.20.0
    INF file em52.inf
    Type : NativeWi-Fi Driver
    Radio types supported : 802.11b802.11a 802.11g 802.11n
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protectionsupported : Yes
    Hosted network supported : Yes
    Authentication and cipher supportedin infrastructure mode:
    Open None
    Open WEP-40bit
    Open WEP-104bit
    Open WEP
    WPA-Enterprise TKIP
    WPA-Enterprise CCMP
    WPA-Personal TKIP
    WPA-Personal CCMP
    WPA2-Enterprise TKIP
    WPA2-Enterprise CCMP
    WPA2-Personal TKIP
    WPA2-Personal CCMP
    Vendordefined TKIP
    Vendordefined CCMP
    WPA2-Enterprise Vendor defined
    WPA2-Enterprise Vendor defined
    Vendordefined Vendor defined
    Vendordefined Vendor defined
    Vendordefined Vendor defined
    Authentication and cipher supportedin ad-hoc mode:
    Open None
    Open WEP-40bit
    Open WEP-104bit
    Open WEP
    WPA2-Personal CCMP
    Vendordefined Vendor defined
    Wireless Display Supported: Yes(Graphics Driver: Yes, Wi-Fi Driver: Yes)




    =======================================================================
    ============================= SHOWINTERFACES =========================
    =======================================================================




    There is 1 interface on the system:


    Name : Wi-Fi 2
    Description : NETGEARWNDA3100v3 N600 Wireless Dual Band USB Adapter
    GUID :60ba9969-26bf-475a-ad90-695aff2e56bd
    Physical address :a0:40:a0:74:4b:88
    State : connected
    SSID : ATF1
    BSSID :1c:74:0d:6a:39:a9
    Network type :Infrastructure
    Radio type : 802.11n
    Authentication :WPA2-Personal
    Cipher : CCMP
    Connection mode : AutoConnect
    Channel : 1
    Receive rate (Mbps) : 600
    Transmit rate (Mbps) : 144
    Signal : 100%
    Profile : ATF1


    Hosted network status : Notavailable




    =======================================================================
    =========================== SHOW HOSTEDNETWORK =======================
    =======================================================================




    Hosted network settings
    -----------------------
    Mode : Allowed
    Settings : <Notconfigured>


    Hosted network status
    ---------------------
    Status : Notavailable




    =======================================================================
    ============================= SHOWSETTINGS ===========================
    =======================================================================




    Wireless LAN settings
    ---------------------
    Show blocked networks in visiblenetwork list: No

    Only use GP profiles on GP-configurednetworks: No

    Hosted network mode allowed in WLAN service:Yes


    Allow shared user credentials fornetwork authentication: Yes

    Block period: Not Configured.


    Auto configuration logic is enabledon interface "Wi-Fi 2"
    MAC randomization not available oninterface Wi-Fi 2




    =======================================================================
    ============================== SHOWFILTERS ===========================
    =======================================================================




    Allow list on the system (group policy)
    ---------------------------------------
    <None>


    Allow list on the system (user)
    -------------------------------
    <None>


    Block list on the system (group policy)
    ---------------------------------------
    <None>


    Block list on the system (user)
    -------------------------------
    <None>




    =======================================================================
    =========================== SHOWCREATEALLUSER ========================
    =======================================================================




    Everyone is allowed to create all userprofiles.




    =======================================================================
    ============================= SHOWPROFILES ===========================
    =======================================================================




    Profiles on interface Wi-Fi 2:


    Group policy profiles (read only)
    ---------------------------------
    <None>


    User profiles
    -------------
    All User Profile : ATF1




    =======================================================================
    ========================== SHOWPROFILES NAME=* =======================
    =======================================================================




    Profile ATF1 on interface Wi-Fi 2:
    =======================================================================


    Applied: All User Profile


    Profile information
    -------------------
    Version : 1
    Type : WirelessLAN
    Name : ATF1
    Control options :
    Connection mode : Connectautomatically
    Network broadcast : Connectonly if this network is broadcasting
    AutoSwitch : Do notswitch to other networks
    MAC Randomization : Disabled


    Connectivity settings
    ---------------------
    Number of SSIDs : 1
    SSID name : "ATF1"
    Network type :Infrastructure
    Radio type : [ AnyRadio Type ]
    Vendor extension : Notpresent


    Security settings
    -----------------
    Authentication :WPA2-Personal
    Cipher : CCMP
    Authentication :WPA2-Personal
    Cipher : GCMP
    Security key : Present


    Cost settings
    -------------
    Cost :Unrestricted
    Congested : No
    Approaching Data Limit : No
    Over Data Limit : No
    Roaming : No
    Cost Source : Default




    =======================================================================
    ======================= SHOW NETWORKSMODE=BSSID ======================
    =======================================================================



    Interface name : Wi-Fi 2
    There are 1 networks currently visible.


    SSID 1 : ATF1
    Network type :Infrastructure
    Authentication :WPA2-Personal
    Encryption : CCMP
    BSSID 1 :08:00:0d:6a:39:a9
    Signal : 100%
    Radio type : 802.11n
    Channel : 1
    Basic rates (Mbps) : 1 2 5.511
    Other rates (Mbps) : 6 9 12 1824 36 48 54
    BSSID 2 :1c:74:0d:6a:39:a9
    Signal : 100%
    Radio type : 802.11n
    Channel : 1
    Basic rates (Mbps) : 1 2 5.511
    Other rates (Mbps) : 6 9 12 1824 36 48 54




    =======================================================================
    ======================= SHOW INTERFACECAPABILITIES ===================
    =======================================================================




    Wireless System Capabilities
    ----------------------------
    Number of antennas connected to the802.11 radio (value not available)


    Max number of channels the devicecan operate on, simultaneously (value not available)


    Co-existence Support : Unknown




    Wireless Device Capabilities
    ----------------------------


    Interface name: Wi-Fi 2


    WDI Version (Windows) : 0.0.0.0


    WDI Version (IHV) : 0.0.0.0


    Firmware Version :


    Station : Supported


    Soft AP : Supported


    Network monitor mode : Supported


    Wi-Fi Direct Device : Supported


    Wi-Fi Direct GO : Supported


    Wi-Fi Direct Client : Supported


    Protected Management Frames : Supported


    DOT11k neighbor report : Unknown


    ANQP Service Information Discovery : Not Supported


    Action Frame : Not Supported


    Diversity Antenna : Unknown


    IBSS : Supported


    Promiscuous Mode : Supported


    P2P Device Discovery : Not Supported


    P2P Service Name Discovery : Not Supported


    P2P Service Info Discovery : Not Supported


    P2P Background Discovery : Not Supported


    P2P GO on 5 GHz : Unknown


    ASP 2.0 Service Name Discovery : Not Supported


    ASP 2.0 Service InformationDiscovery : Not Supported


    IP Docking Capable : Not Supported


    FIPS : Supported


    Instant Connect : Not Supported


    Dx Standby NLO : Not Supported


    Extended Channel SwitchAnnouncement : Unknown


    Function Level Reset : Not Supported


    Platform Level Reset : Not Supported


    Bus Level Reset : Not Supported


    MAC Randomization : Not Supported


    Fast Transition : Not Supported


    MU-MIMO : Unknown


    Miracast Sink : Unknown


    BSS Transition (802.11v) : Unknown


    IHV Extensibility Module Configured : Not Supported


    Number of Tx Spatial Streams : 0


    Number of Rx Spatial Streams : 0


    Number of Concurrent ChannelsSupported : 2


    P2P GO ports count : 1


    P2P Clients Port Count : 2


    P2P Max Mobile AP Clients : 8


    Max ANQP Service AdvertisementsSupported : 0


    Co-existence Support : Unknown
      My ComputerSystem Spec

  7. Caledon Ken's Avatar
    Posts : 10,553
    Windows 10 Pro x64 Build 1803
       26 Feb 2018 #47

    There does not seem to be any other networks in range.

    Can you change the modem / router to channel 6. It does show a signal strength of 100% so that is good although not sure where you are in relationship to modem / router.

    Notice that your USB dongle is capable of some impressive receive rates yet your modem / router maximum speed is 54Mbps, basically a G class radio.

    Could you share what device you have as a modem? How is your internet provided, cable, cellular, etc?
      My ComputerSystem Spec

  8. MrHudson's Avatar
    Posts : 403
    Windows 10 Home 64-bit Edition
       26 Feb 2018 #48

    Doug, If You have your own modem/router, you can check for a firmware update for your modem/router.
    Centurylink uses DSL 2.4 GHz and their max speed is only 54Mbps.
      My ComputersSystem Spec

  9.    27 Feb 2018 #49

    Caledon Ken said: View Post
    There does not seem to be any other networks in range.

    Can you change the modem / router to channel 6. It does show a signal strength of 100% so that is good although not sure where you are in relationship to modem / router.

    Notice that your USB dongle is capable of some impressive receive rates yet your modem / router maximum speed is 54Mbps, basically a G class radio.

    Could you share what device you have as a modem? How is your internet provided, cable, cellular, etc?
    Modem is a Zyxel C1100Z. ISP is Century Link. Slowest DSL they offer, 1.5MBPS. We live out in the country, every one has 5 acres. My neighbors network will often show up. CL knows of how overloaded the old copper system is, they are claiming that we will be on a fiber optic network by July 2018. But they also claimed that for January 2017. I am sitting about 20 feet from the modem, with 0 obstructions.
    I switched i over to channel 6, no different.
    Like I have mentioned, my old Linux machine has zero issues uploading images..and staying connected. Now I get a lot of DNS, server, that page is not available errors.
      My ComputerSystem Spec

  10.    27 Feb 2018 #50

    MrHudson said: View Post
    Doug, If You have your own modem/router, you can check for a firmware update for your modem/router.
    Centurylink uses DSL 2.4 GHz and their max speed is only 54Mbps.
    Firmware is up to date....
      My ComputerSystem Spec


 
Page 5 of 6 FirstFirst ... 3456 LastLast

Related Threads
Optane, the poor man's SSD in Drivers and Hardware
I ordered an Optane module for my XPS 8900 Dell computer online for about $25 total. They only work with i3, 5, and 7 and only 7th gen Kaby lake processors. They are tied into the drive with the OS on it only and you can't easily change that drive...
Poor Wifi on a desktop PC in Network and Sharing
I have a big old desktop PC. Huge metal coolermaster cm storm trooper case. I connect to internet via Ethernet. Works well. But when I ordered the custom built machine I asked for an internal dual band wifi card just in case i had to ever move the...
Solved Poor LAN wifi speed in Network and Sharing
Hi, My wifi connection between my PC and my router seems to be kind of slow as it reaches max around 50 Mbps. I'm not talking about my internet speed but about the speed between my PC and my router. I have this setup - Archer T4U USB 802.11 ac...
Poor Win 10 in Performance & Maintenance
I upgraded from Win 8.1 to Win 10, and some of my games will not work, can I return to Win 8 or 8.1???????:(
Poor selection of Apps in Software and Apps
Windows 8 didn't really take of with Windows apps vs the competition. Do you think Windows 10 will one day compete with Apple and Android?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 20:50.
Find Us