Please put more detail into your System Specs like motherboard model number. Look at mine for an example (mine has too much but better than not enough).
How to fill out System Specs for tenforums.
See here: System Specs - Fill in at Ten Forums
The latest dump shows this:
e1i63x64.sys belongs to Intel(R) Gigabit Adapter NDIS 6.x driver dated 3/26/2015 4:24:57 PM. I think this is actually a
ffffd000`f49aa7d0 fffff801`fa13db02Unable to load image \SystemRoot\System32\drivers\e1i63x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1i63x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1i63x64.sys
Realtek PCIe GBE Family Controller.
Try uninstalling it from Device Manager then reboot and let Win 10 detect anit and reload the driver, see if that helps. If not we'll have to try to find a different, hopefully newer, driver.
If that doesn't help then it's time to run Driver Verifier:
Driver Verifier is a diagnostic tool built into Windows 10, it is designed to verify both native Microsoft drivers and third party drivers. Driver Verifier's verification process involves putting heavy stress on drivers with the intention of making bad, outdated, incompatible or misbehaving drivers fail. The required result is a BSOD (Blue Screen of Death) which will generate a crash dump for debugging purposes.
Machines exposed to Driver Verifier will run very sluggishly due to the stress being applied to the drivers.
Driver Verifier - Enable and Disable in Windows 10
It is not advised to run Driver Verifier for more than 48 hours at a time. Disable Driver Verifier after 48 hours or after receiving a BSOD, whichever happens soonest.
Always create a Restore Point prior to enabling Driver Verifier.