Repair Install Windows 10 with an In-place Upgrade  


  1. Posts : 16,012
    Win 10 Pro 64-bit v1909 - Build 18363 Custom ISO Install
       #1200

    Hello @rikiRetardo,

    rikiRetardo said:
    . . . now need same specifically for 1909 install for my wifes PC.

    You can Download version 1909 from here . . .

    > TechBench by WZT - Includes OLDER Windows 10 ISO's - RECOMMENDED

    I hope this helps.
      My Computer


  2. Posts : 61,554
    64-bit Windows 11 Pro for Workstations
    Thread Starter
       #1201



    You can also get older ISO builds below.

    Download Windows 10 ISO File
      My Computers


  3. Posts : 8
    Windows 10 21H1 OS Build 19043.1055
       #1202

    Brink said:
    Hello PRMyx,

    Were these apps moved to a different location than default? If so, their links could have been broken be the repair install.

    It could also be from file corruption caused by something.
    Hi Shawn,

    No, they weren't moved. I was just trying to repair install. I am currently on the same version with the ISO file that I downloaded but once done, I can't launch all my apps because of that error. I am always doing Windows Update but errors never occur that way.
      My Computer


  4. Posts : 61,554
    64-bit Windows 11 Pro for Workstations
    Thread Starter
       #1203

    PRMyx said:
    Hi Shawn,

    No, they weren't moved. I was just trying to repair install. I am currently on the same version with the ISO file that I downloaded but once done, I can't launch all my apps because of that error. I am always doing Windows Update but errors never occur that way.
    I must admit that I'm not sure why you're getting that error message from this.
      My Computers


  5. Posts : 80
    10 Pro PC + HP Laptop, 10 Home HP & Dell Laptops
       #1204

    Brink said:
    ???

    Brink, I am at my wits end. I have version 20H2 @ 19042.630 (would not update earlier so I backed up to 19042.630 to try to fix it, am STUCK now). Still would not update so I am attempting an 'in place upgrade' BUT your help here on page 1 (updated 20 Oct) says (red highlighted warning triangle before the video) Quote: If you have Windows 10 version 20H2 installed, then it is required to have KB4586853 for build 19042.662 or higher installed to be able to do a repair install and keep everything. Unquote) Again, mine is STUCK on 20H2 ver 19042.630, and KB4586853 will not install.

    So, given the quoted note on OP, do I (or can I) do an in place upgrade to repair 19042.630, or .631 (if there is one) because this help topic says I have to have that KB4586853 to save everything during the in place upgrade.


    .
      My Computer


  6. Posts : 21,424
    19044.1586 - 21H2 Pro x64
       #1205

    mega10user said:
    Brink, I am at my wits end. I have version 20H2 @ 19042.630 (would not update earlier so I backed up to 19042.630 to try to fix it, am STUCK now). Still would not update so I am attempting an 'in place upgrade' BUT your help here on page 1 (updated 20 Oct) says (red highlighted warning triangle before the video) Quote: If you have Windows 10 version 20H2 installed, then it is required to have KB4586853 for build 19042.662 or higher installed to be able to do a repair install and keep everything. Unquote) Again, mine is STUCK on 20H2 ver 19042.630, and KB4586853 will not install.

    So, given the quoted note on OP, do I (or can I) do an in place upgrade to repair 19042.630, or .631 (if there is one) because this help topic says I have to have that KB4586853 to save everything during the in place upgrade.


    .
    Follow the link for KB4586853 and try installing it using the MSU and directions on the OP for KB4586853 . Download the appropriate MSU file, right click on it, and try installing that way.

    KB4586853 CU Windows 10 v2004 build 19041.662 and v20H2 19042.662
      My Computer


  7. Posts : 80
    10 Pro PC + HP Laptop, 10 Home HP & Dell Laptops
       #1206

    steve108 said:
    Follow the link for KB4586853 and try installing it using the MSU and directions on the OP for KB4586853 . Download the appropriate MSU file, right click on it, and try installing that way.

    KB4586853 CU Windows 10 v2004 build 19041.662 and v20H2 19042.662


    Steve, I have this KB on my desktop and have tried (again just past few minutes) installing this KB every way I could. It goes through the entire install then shows the install was not installed. I just downloaded the ISO with the media creation tool but need to know if it'll lose all my stuff since the KB4586853 will not install. The only way I haven't tried to install this KB is in safe mode, not ever sure it can be installed in safe mode. Will be making the DVD Win10 install disk off the ISO, shortly. :)


    .
      My Computer


  8. Posts : 21,424
    19044.1586 - 21H2 Pro x64
       #1207

    mega10user said:
    Steve, I have this KB on my desktop and have tried (again just past few minutes) installing this KB every way I could. It goes through the entire install then shows the install was not installed. I just downloaded the ISO with the media creation tool but need to know if it'll lose all my stuff since the KB4586853 will not install. The only way I haven't tried to install this KB is in safe mode, not ever sure it can be installed in safe mode. Will be making the DVD Win10 install disk off the ISO, shortly. :)

    .
    When you do an in-place-upgrade, if you don't see the option to keep apps and files or it's grayed out, you can stop - so you won't lose anything trying.

    Stop if you don't get the option to save both:
    https://www.tenforums.com/attachment..._install-8.png

    What happens if you run

    Code:
    sfc /scannow
    followed by
    dism /online /cleanup-image /CheckHealth
    feel free to post the outputs here.
      My Computer


  9. Posts : 821
    Win 10
       #1208

    mega10user said:
    I have this KB on my desktop and have tried (again just past few minutes) installing this KB every way I could. It goes through the entire install then shows the install was not installed.
    With which error code fails the Update?

    To determine this, please have a look at the update history in the Windows settings.

    Friendly greetings
      My Computer


  10. Posts : 80
    10 Pro PC + HP Laptop, 10 Home HP & Dell Laptops
       #1209

    steve108 said:
    When you do an in-place-upgrade, if you don't see the option to keep apps and files or it's grayed out, you can stop - so you won't lose anything trying.

    Stop if you don't get the option to save both:
    https://www.tenforums.com/attachment..._install-8.png

    What happens if you run

    Code:
    sfc /scannow
    followed by
    dism /online /cleanup-image /CheckHealth
    feel free to post the outputs here.
    .

    Steve108:

    The in place upgrade was cancelled. It would not let me save apps or files, per the last screen to install (point of no return). I tried first to make a DVD disk from the ISO, disk not big enough so I used the USB option and it ran fine until it got to the saving apps/files selection (was all greyed out, both 'dots' unable to be checked). I exited right there.

    Admin cmd prompt sfc /scannow had files it could not fix, the section of "CBS.log where the errors were are:


    2021-02-27 23:18:33, Info CSI 00000231 [SR] Beginning Verify and Repair transaction
    2021-02-27 23:18:36, Error CSI 00000232@2021/2/28:04:18:36.697 (F) onecore\base\wcp\sil\ntsystem.cpp(3044): Error STATUS_OBJECT_NAME_NOT_FOUND originated in function Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysCreateFile expression: (null)[gle=0x80004005]
    2021-02-27 23:18:36, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2021-02-27 23:18:36, Info CBS Could not get file name for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2021-02-27 23:18:37, Info CBS Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2021-02-27 23:18:37, Info CBS Added C:\WINDOWS\Logs\CBS\CbsPersist_20210227175331.cab to WER report.
    2021-02-27 23:18:37, Info CBS Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2021-02-27 23:18:37, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2021-02-27 23:18:37, Info CBS Not able to add poqexec.log to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2021-02-27 23:18:37, Info CBS Not able to add SCM.EVM to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2021-02-27 23:18:41, Error CSI 00000233 (F) STATUS_OBJECT_NAME_NOT_FOUND #19200841# from Windows::Rtl::SystemImplementation:irectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_READ_ATTRIBUTES), oa = @0x213377b8f0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[110]'\SystemRoot\WinSxS\amd64_windows-defender-offline-amcore_31bf3856ad364e35_10.0.19041.546_none_229f490ba7ad0589'; aOBJ_CASE_INSENSITIVE)}, iosb = @0x213377b950, as = (null), fa = 0, sa = (FILE_SHARE_READ|FILE_[gle=0xd0000034]
    2021-02-27 23:18:41, Error CSI SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)[gle=0xd0000034]
    2021-02-27 23:18:41, Error CSI 00000234 (F) STATUS_OBJECT_NAME_NOT_FOUND #19200840# from Windows::Rtl::SystemImplementation::CDirectory::OpenExistingDirectory(...)[gle=0xd0000034]
    2021-02-27 23:18:41, Error CSI 00000235 (F) STATUS_OBJECT_NAME_NOT_FOUND #19200839# from Windows::Rtl::SystemImplementation::CDirectory_IRtlDirectoryTearoff::OpenExistingDirectory(flags = 0, da = (SYNCHRONIZE), oa = @0x213377bf50->SIL_OBJECT_ATTRIBUTES {s:40; on:"amd64_windows-defender-offline-amcore_31bf3856ad364e35_10.0.19041.546_none_229f490ba7ad0589"; aOBJ_CASE_INSENSITIVE)}, sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), oo = (FILE_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|FILE_OPEN_FOR_BACKUP_INTENT), dir = NULL, d[gle=0xd0000034]
    2021-02-27 23:18:41, Error CSI isp = Invalid)
    ** NOTE: Those emoji's above in the CBS log are the result of the characters in their lines, funny?? Not lately... **
    The other cmd prompt dsm /online /cleanup-image /CheckHealth had "No component store corruption detected. That operation completed successfully.


    Don't know if this can help figure this thing out?


    .

    - - - Updated - - -

    Tekkie Boy said:
    With which error code fails the Update?

    To determine this, please have a look at the update history in the Windows settings.

    Friendly greetings
    .



    Hi Tekkie, if your talking about the installed updates screen, it isn't there as a failed install, he11 it isn't there at all. It never got to register there I haven't seen 'failed' updates there on that screen in a looooong time (unless I am looking in the wrong place). Also, there is no error code shown it just says in the install window the update could not be installed.


    .
      My Computer


 

Tutorial Categories

Repair Install Windows 10 with an In-place Upgrade Tutorial Index Network & Sharing Instalation and Upgrade Browsers and Email General Tips Gaming Customization Apps and Features Virtualization BSOD System Security User Accounts Hardware and Drivers Updates and Activation Backup and Restore Performance and Maintenance Mixed Reality Phone


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:45.
Find Us




Windows 10 Forums