Windows 10: Sudden slow boot time on Windows Loading screen with SSD

Page 3 of 8 FirstFirst 12345 ... LastLast

  1. Posts : 30
    Windows 10
       21 Feb 2018 #21
      My ComputerSystem Spec

  2.    21 Feb 2018 #22

    Follow these steps to run the Windows inbuilt troubleshooter:
    a) Write Troubleshooting in the search box and hit enter.
    b) Click on Troubleshooting tab.
    c) Click on view all option on the upper left corner.
    d) Select the Hardware and Device options from the list.
    e) Click Next to run the Hardware and Device Troubleshooter.



    Try to download and run the Fixit tools from the link below.

    Find and fix problems with devices and hardware

    Find and fix problems to help optimize Windows speed and performance

    http://support.microsoft.com/gp/hardware_device_problems



    I would like you to check the system integrity of your Windows OS installation.



    • Please type cmd.exe into Start Menu search box.
    • Please right click cmd.exe and select "Run as administrator".
    • Please type the following command and press the <Enter> key: sfc /scannow (Please note that there is a space between 'sfc" and "/scannow".)
    • It should take about 20 minutes to run, if there are no serious errors.
    • If the System File Checker reports that some errors were fixed, but some remain; please reboot your computer and run the System File Checker from an Administrator Command Prompt, again.
    • If the System File Checker again reports that some errors were fixed, but some remain, please reboot your computer and run it a third time.
    • If "Resource Integrity Violations" (errors) are reported that could not be corrected, or were not corrected after a third SFC run, then please navigate to the folder: C:\Windows\Logs\CBS and copy the file "cbs.log" to your desktop immediately. I am asking you do that because that file is dynamic, so I want to be able to examine a copy that is unchanged from the time that the System File Checker was run.
    • If there are errors that couldn't be corrected, let me know and I will provide you with instructions as to how to upload the file.



    Install latest driver for "Standard PS/2 Keyboard and Mouse" drivers from your computer manufacturer website.

    If there are mouse and keyboard drivers install them as well.

    Install all latest device drivers and Windows updates.
      My ComputerSystem Spec


  3. Posts : 30
    Windows 10
       21 Feb 2018 #23

    I get this error when I try to execute the troubleshooting, also tried the rest, the sfc /scannow found no errors and I've tried to update the driver of both mouse and keyboard but got the usual " The best drivers for your device are already installed..." Windows is up to date and the drivers from the MB manufacturer too.
    Click image for larger version. 

Name:	error troubleshot hardware device.png 
Views:	49 
Size:	8.1 KB 
ID:	178017
      My ComputerSystem Spec


  4. Posts : 20,769
    windows 10 professional version 1607 build 14393.969 64 bit
       21 Feb 2018 #24

    The device, Standard PS/2 Keyboard, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPI\PNP0303\0.
    The device, Microsoft PS/2 Mouse, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\0.

    Open device manager > click view > show hidden devices > expand all rows > look for any row with a yellow triangle icon with black exclamation mark or any unknown device > post images into the thread.

    Post images of mouse and keyboard into the thread

    On any item that has a yellow triangular icon or that is displaying unknown device > right click on the row > left click on properties > left click details tab > under property change to hardware IDs > post image in the thread and copy and paste the information displayed in the value area

    How to easily find drivers for Unknown Devices in Windows | PCWorld
      My ComputerSystem Spec


  5. Posts : 30
    Windows 10
       21 Feb 2018 #25

    About the "Post images of mouse and keyboard into the thread", you actually want me to take a photo of my keyboard and mouse or just the model of both? It's a CM MasterKeys Lite L keyboard and a Logitech G PRO mouse.
    Click image for larger version. 

Name:	mmc_2018-02-21_16-12-53.png 
Views:	2 
Size:	36.8 KB 
ID:	178019Click image for larger version. 

Name:	mmc_2018-02-21_16-14-53.png 
Views:	2 
Size:	50.9 KB 
ID:	178020Click image for larger version. 

Name:	mmc_2018-02-21_16-16-04.png 
Views:	2 
Size:	50.5 KB 
ID:	178021
    Standard PS/2 Keyboard: ACPI\VEN_PNP&DEV_0303 ACPI\PNP0303 *PNP0303 Microsoft PS/2 Mouse: ACPI\VEN_PNP&DEV_0F03 ACPI\PNP0F03 *PNP0F03
      My ComputerSystem Spec


  6. Posts : 20,769
    windows 10 professional version 1607 build 14393.969 64 bit
       21 Feb 2018 #26

    Right click on the standard ps/2 keyboard > uninstall device > device manager menu click action > scan for hardware changes > reboot
    For the ps/2 mouse perform the same steps.

    How to Find Drivers for Unknown Devices in the Device Manager

    Run this log collector and post a zip into this thread:
    log collector v2-beta08.zip (click extract)
      My ComputerSystem Spec

  7.    21 Feb 2018 #27

    Hi @Felluz

    Please open the Command Prompt by typing cmd.exe into Start Menu, right-click on Cmd.exe, and open it as an administrator.

    Type following command and press Enter key.

    Code:
    Chkdsk C: /f
    You will be prompted to schedule a error checking C: partition next time you reboot your computer, type y and press Enter key and restart your computer.

    Also use CrystalDiskInfo program to view SMART health report of the SSD drive.
      My ComputerSystem Spec


  8. Posts : 30
    Windows 10
       22 Feb 2018 #28

    zbook said: View Post
    Right click on the standard ps/2 keyboard > uninstall device > device manager menu click action > scan for hardware changes > reboot
    For the ps/2 mouse perform the same steps.

    How to Find Drivers for Unknown Devices in the Device Manager

    Run this log collector and post a zip into this thread:
    log collector v2-beta08.zip (click extract)
    Here you go: www.transfernow.net/812u71k18e2m , I don't know where these ps/2 come from, cause I've stopped using ps/2 devices about 10 years ago.

    Click image for larger version. 

Name:	mmc_2018-02-22_09-41-51.png 
Views:	2 
Size:	55.7 KB 
ID:	178117
    Last edited by Felluz; 22 Feb 2018 at 07:42.
      My ComputerSystem Spec


  9. Posts : 30
    Windows 10
       22 Feb 2018 #29

    FreeBooter said: View Post
    Hi @Felluz

    Please open the Command Prompt by typing cmd.exe into Start Menu, right-click on Cmd.exe, and open it as an administrator.

    Type following command and press Enter key.

    Code:
    Chkdsk C: /f
    You will be prompted to schedule a error checking C: partition next time you reboot your computer, type y and press Enter key and restart your computer.

    Also use CrystalDiskInfo program to view SMART health report of the SSD drive.
    I did run the chkdsk inside Windows before only to check, the sfc /scannow too, no errors found, about the SSD, I bought it about 3 months ago on Black Friday.

    Click image for larger version. 

Name:	DiskInfo32_2018-02-22_09-18-20.png 
Views:	41 
Size:	66.1 KB 
ID:	178115
      My ComputerSystem Spec

  10.    22 Feb 2018 #30

    The temperature is to high, you should clean all dust and dirt from CPU, Fan and other components. You should also clean and apply new thermal paste to CPU.

    Can you please uninstall Standard PS/2 Keyboard and Microsoft PS/2 Mouse drivers from Device Manager and restart your computer.

    Running the Chkdsk command in booted Windows wont always give you correct scan result. Can you please schedule a error checking at next reboot.

    Fast startup (aka: hiberboot, hybrid boot, or hybrid shutdown) is turned on by default in Windows and is a setting that helps your PC start up faster after shutdown. Check to see if this feature is turn on if its turn it off and restart your computer to see issue resolves.

    How to Turn On or Off Fast Startup in Windows 10

    Uninstall all third part-party antivirus and firewall program to check if issue resolves.

    You can also try to fix to issue doing repair install of Windows 10 without losing anything.

    How to Do a Repair Install of Windows 10 with an In-place Upgrade
      My ComputerSystem Spec


 
Page 3 of 8 FirstFirst 12345 ... LastLast

Related Threads
Hi! This is my first post here so greetings :) Recently my win 10 started booting very slow. I purchased an SSD (EVO 850) a month ago and was amazed how fast it boots, approx. 11s from cold boot to login screen. Since I mine crypto I don't...
My wife has a three year old HP Laptop running Windows 10. It is used for a few hours each day for nothing more than accessing the internet and project work for various school and church groups she is involved in. Recently the time take to...
I recently upgraded to Win 10 on my Samsung Series 7 Chronos note book. I went from a boot time of 15 seconds to a 3 min boot time on Windows 10. I already tried disabling non essential start up programs, defragged my HDD, activated hybrid power,...
Hi all, I'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot. Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images. ...
I have a laptop that is about 3 years old. It started to boot very slow (running Windows 7) a few months ago. I updated to Windows 10 (fresh install) hoping it would be fixed. The boot just drags and drags. It might be a hard drive issue...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:48.
Find Us