New
#11
Please see Dropbox - Errors - Simplify your life for results from Tuneup_plus_log.bat and Update_failure_info.bat.
Thank you for all help.
Please see Dropbox - Errors - Simplify your life for results from Tuneup_plus_log.bat and Update_failure_info.bat.
Thank you for all help.
Please follow the instructions for tuneup:
Batch files for use in BSOD debugging
Tuneup.bat - Click here to go to the BSOD batch repository to download and run this batch file.
If you're not able to follow them please indicate the part that is not understood,
If the instructions need to be modified please comment.
Please see Dropbox - Errors - Simplify your life
Thank you for all help.
The logs displayed recent BSOD.
Please run V2 and DM:
BSOD - Posting Instructions
1) Open administrative command prompt (ACP) and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /scanhealth
4) dism /online /cleanup-image /restorehealth
5) sfc /scannow
6) chkdsk /scan
7) wmic recoveros set autoreboot = false
8) wmic recoveros set DebugInfoType = 7
9) wmic recoveros get autoreboot
10) wmic recoveros get DebugInfoType
11) wmic Computersystem where name="%computername%" set AutomaticManagedPagefile=True
12) wmic Computersystem where name="%computername%" get AutomaticManagedPagefile
13) bcdedit /enum {badmemory}
14) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
Use this link as needed when posting results:
How to Change Post Editor to Source or WYSIWYG Mode at TenForums.com
15) Uninstall VIPRE Advanced Security using the applicable uninstall tool:
How to remove/uninstall VIPRE : Support.
VIPRE Removal Tool (Business Agents) : VIPRE Business & VIPRE Business Premium
16) Uninstall Malwarebytes using the applicable uninstall tool:
https://downloads.malwarebytes.com/file/mb_clean
16) Make sure Microsoft defender is on
Please see Dropbox - Errors - Simplify your life for V2 and DM results.
Please note I have had VIPRE Advanced Security and Malwarebytes for years and do not understand why I should uninstall it.
@jaburmester
The installation failed with error code 0x80070013 what means: Error media write protect.
2021-03-28 06:51:52, Error SP CAddBootEntry: Failure while adding the boot entry. Error: 0x80070013[gle=0x00000013]
2021-03-28 06:51:52, Error SP Operation failed: Add boot entry for C:\$WINDOWS.~BT\NewOS\WINDOWS. Locale = en-GB. Error: 0x80070013[gle=0x000000b7]
2021-03-28 06:51:52, Error SP ExecuteOperations: Failed execution phase Finalize. Error: 0x80070013
2021-03-28 06:51:52, Error MOUPG MoSetupPlatform: Finalize reported failure!
2021-03-28 06:51:52, Error MOUPG MoSetupPlatform: Using action error code: [0x80070013]
2021-03-28 06:51:52, Error MOUPG CDlpActionFinalize::ExecuteSetupPlatformFinalize(1120): Result = 0x80070013
2021-03-28 06:51:52, Error MOUPG CDlpActionFinalize::ExecuteRoutine(510): Result = 0x80070013
2021-03-28 06:51:53, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(493): Result = 0x80070013
Uninstall Vipre Advanced Security temporary and then use the removal tool too:
Download VIPRE Removal Tool 12.0.0.28
When done, uninstall Malwarebytes temporary and use the Malwarebytes Removal tool to:
https://downloads.malwarebytes.com/file/mbst
Answers the “Reinstall Malwarebytes for Windows” Window with no.
Then try the update with a 20h2 install media again.
Friendly greetings
Please fix the BSOD before the upgrade.
Non-Microsoft antivirus software, firewall software, and drive encryption software are well known problems with Windows upgrades.
The logs displayed problems with both software (WER).
1) Make a new restore point:
Create System Restore Point in Windows 10
2) Open administrative command prompt (ACP) and type or copy and paste:
3) reagentc /enable
4) reagentc /info
5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
6) Open Ccleaner > click windows tab or custom clean > scroll down to system and advanced > post an image into the thread
7) update the progress with the steps in post #14
8) Read these links on Windows driver verifier:
a) learn how to use the Windows Recovery Environment (RE) commands: reset and bootmode to turn off the tool
b) do not use the tool until it is communicated in the thread
Enable and Disable Driver Verifier in Windows 10
https://answers.microsoft.com/en-us/...3-c48669e4c983
Windows driver verifier is designed to stress test drivers.
If there are misbehaving drivers the computer will crash.
If dump files are created they can be debugged.
Misbehaving drivers are then uninstalled or uninstalled and reinstalled.
The tool is run for approximately 48 hours and then an additional 36 hours after the last BSOD.
If there are no further BSOD this concludes the use of the tool.
After each BSOD you must turn off the tool in order to return to the desktop.
Learn the Windows RE commands reset and bootmode.
These are run in safe mode or safe mode with command prompt.
In case these fail the next option is system restore.
If system restore fails you can restore a backup image or use registry commands.
Start the tool with the 3 customized test settings in the Ten Forums link.
Increase the simultaneous customized test settings by 3 - 5 / hour up to the 19 customized test settings in the Microsoft link.
There can be performance problems and / or slow boot while using the tool.
If necessary the customized test settings can be modified.
Summary:
a) make a new restore point
b) test all non-Microsoft drivers
c) test no Microsoft drivers
d) after each BSOD use the reset command to turn off the tool
e) if the reset command does not work then use the bootmode command
f) only if both reset and bootmode command fail to turn off the tool then use restore
g) start with the 3 customized test settings in the Ten Forums link
h) increase the customized test settings up to the 19 customized test settings in the Microsoft link
i) report any performance problems or very slow boot so that the customized settings can be modified
Code:Event[38229]: Log Name: System Source: Microsoft-Windows-WHEA-Logger Date: 2021-04-13T09:48:41.612 Event ID: 3 Task: N/A Level: Information Opcode: Info Keyword: WHEA Error Event Logs User: S-1-5-19 User Name: NT AUTHORITY\LOCAL SERVICE Computer: SurfacePro4 Description: A hardware event has occurred. An informational record describing the condition is contained in the data section of this event.
Code:Event[38122]: Log Name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 2021-04-07T02:28:30.207 Event ID: 1001 Task: N/A Level: Error Opcode: N/A Keyword: Classic User: N/A User Name: N/A Computer: SurfacePro4 Description: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000028, 0x0000000000000002, 0x0000000000000000, 0xfffff8073c8e8e85). A dump was saved in: C:\windows\Minidump\040721-21406-01.dmp. Report Id: 85c49d92-2bc8-4d22-9ce0-ca67947c6af5.
Code:Windows Error Reporting: +++ WER0 +++: Fault bucket 1781117006522445390, type 4 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: mbamtray.exe P2: 4.0.0.974 P3: 607861f0 P4: Qt5Core.dll P5: 5.14.1.0 P6: 603971ce P7: c0000005 P8: 0000000000219dc5 P9: P10: +++ WER1 +++: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: mbamtray.exe P2: 4.0.0.974 P3: 607861f0 P4: Qt5Core.dll P5: 5.14.1.0 P6: 603971ce P7: c0000005 P8: 0000000000219dc5 P9: P10:
Code:4/7/2021 1:18 AM Application Error Faulting application name: VipreEdgeProtection.exe, version: 3.0.0.29, time stamp: 0x5b8653c4
Faulting module name: combase.dll, version: 10.0.18362.1411, time stamp: 0xb445b2a6
Exception code: 0xc0000005
Fault offset: 0x000000000006f8f0
Faulting process ID: 0x45a4
Faulting application start time: 0x01d726e42cddeaa3
Faulting application path: C:\Program Files (x86)\VIPRE\VipreEdgeProtection.exe
Faulting module path: C:\windows\System32\combase.dll
Report ID: aea3c08e-8b23-462c-810f-4ce740be2c31
Faulting package full name: 
Faulting package-relative application ID: 4/1/2021 10:45 AM Application Error Faulting application name: VipreEdgeProtection.exe, version: 3.0.0.29, time stamp: 0x5b8653c4
Faulting module name: combase.dll, version: 10.0.18362.1411, time stamp: 0xb445b2a6
Exception code: 0xc0000005
Fault offset: 0x000000000006f8f0
Faulting process ID: 0x3464
Faulting application start time: 0x01d72396dcec3314
Faulting application path: C:\Program Files (x86)\VIPRE\VipreEdgeProtection.exe
Faulting module path: C:\windows\System32\combase.dll
Report ID: 4455d534-3b1a-4245-9dfe-80b9d96a16ee
Faulting package full name: 
Faulting package-relative application ID:
You have not run this script: 👉 Tuneup_plus_log.bat ✔️
Please download the above new version and run it and then upload the "Tuneup.log" file created on your desktop.
Do not run the old version you downloaded weeks ago.
Last edited by Matthew Wai; 18 Apr 2021 at 06:12.
Attached is Tuneup_plus_log results. Tuneup.log