Your Device Is not Ready Vs 2004

spunk · 22 Jun 2020

I have 2 desktop computers. Speccy reports on each one attached.
The Old computer, computer A is about 10 years old. The new computer, Computer B is about 6 months old. I made an image of Computer A when it was on Windows 10 1903. I restored this image to Computer B, I then upgraded both computers to 1909 with no issues using the same ISO image file. Both computer working flawlessly.
I am trying to install 2004. Using the latest ISO image downloaded from the Microsoft site v 34201 3 other laptops have been upgraded with this image with no problem and 2 other laptops have had a Clean install with this same ISO image with no issues.
Computer A has a message in Windows Update that says, Your Device Is Not Ready. (See attached) Computer B does not have this message. Using the same ISO image 2004 as other computers that were successful, upgrading each desktop, both fail with the error
0xC1900101-0x40017 Installation failed in the Second_Boot phase
I have Updated each nVidia driver from the nVidia page to the latest driver for each computer. There is 104GB Free space on each C: drive.
I have also done the following
All Windows Updates
Disable Memory Integrity
Use DISM Tool and SFC /scannow
No Yellow flags in Device Manager. All drivers updated to latest Gigabyte drivers for these boards.

Computer A http://speccy.piriform.com/results/h...emGq3rdE8OWxKj
Computer B http://speccy.piriform.com/results/M...tsBh6gohMUZ1xm

I do not know what Microsoft is waiting for and what it needs to do to Computer A.to make it Ready. I also don't know what to do with Computer B to do the Upgrade. Any help would be welcomed.

EdieShack · 22 Jun 2020

I'm no expert, but I've been reading a lot about Windows10 2004. From what I understand, 2004 still has some issues, and so MS is withholding the update for machines it knows aren't going to be compatible. Once they get the bugs ironed out, you'll get the upgrade. Note in their message to you "there's nothing you need to do at this time".

Now for the truly knowledgeable folks to weigh in....

zbook · 22 Jun 2020

The upgrade error code: 0xC1900101-0x40017 is typically caused by a problematic driver.

Please run V2 and upload directly into this thread:
BSOD - Posting Instructions

Run this script and post a share link into the thread:

Code:

function wh   
    {  
        Param ( [parameter (Mandatory = $true)][string]$txt )  
        Write-Host $txt -ForegroundColor Green -BackgroundColor Black -NoNewline  
        ##Example usage wh "Alias for `n Write-Host"  
  
    } ## End function wh  
  
  
function StartScript   
    {  
        ##Locating Temp Dir and writing Transcript  
        $global:tempDir = [System.IO.Path]::GetTempPath()   
        MD $tempDir\LOGS -EA SilentlyContinue   
        CD $tempDir\LOGS  
        $txtCount = Get-Item $tempDir/LOGS/*.TXT -EA SilentlyContinue  
        if((Get-Host).Version.Major -cge 5) ##WIN7 Not Supported  
            {  
                if($txtCount.Count -cge 1)   
                {Start-Transcript -Append -Path $tempDir/LOGS/Event-Search.TXT}   
                Else{Start-Transcript -Path $tempDir\LOGS\Event-Search.TXT}   
            }  
  
        $global:explore = $tempDir + "LOGS\"  
        $global:Ver = "1.6.3"  
        wh "`nLog Collection... (V$Ver)`n"  
  
        #clearing previous actions  
        Stop-Job *  
  
        #Initialize CheckBox Vars to $True/$False  
            $Global:EventsCollect = $true; $Global:SetupDiagCollect = $true  
                $Global:UpdatesCollect = $true; $Global:WLANCollect = $true  
                    $Global:PowerCollect = $true; $Global:GPCollect = $true  
                        $Global:miscCollect = $true; $Global:bingCollect = $true  
                            $Global:eventOut = $false        
        #Clear Jobs  
        Stop-Job *  
        Remove-Job *  
                                          
    } ## End function Start-Script  
  
  
function SetupDiagFunc  
    {  
        wh "`n Grabbing SetupDiag.exe ..."       
        Invoke-WebRequest https://go.microsoft.com/fwlink/?linkid=870142 -OutFile $tempDir\SetupDiag.exe -TimeoutSec 3 -UseBasicParsing  
            #check for successful download  
            if((Get-Item $tempDir\SetupDiag.exe).length -gt 100000)  
                {  
                  wh "`nSuccessful DL!"  
                  wh "`n Invoking SetupDiag.exe ..."  
                  $SetupDiag = {CMD.EXE /C "%temp%\setupdiag.exe /Verbose /Output:%temp%\SetupDiag-Log.txt"}  
  
                  ## Kick-Off SetupDiagJob  
                  Start-Job -Name SetupDiagJob -ScriptBlock $SetupDiag                     
                  
                }Else{Write-Host "`nDownload of SetupDiag.exe Failed!" -BackgroundColor RED }  
  
    } ## End Function SetupDiagFunc  
  
  
function EventSearch  
    {  
    wh "`n Starting EventSearch Job-Function ...`n"  
    ## Gathering Events from System using Get-WinEvent via Job  
    $EventSearchJob =   
        {  
        $evtPaths = Get-Item C:\Windows\System32\Winevt\Logs\*.evtx -Exclude "*PowerShell*",   
            "*known folders*" | Select-Object FullName  
        $i = $evtPaths.Count  
  
        $x = 0 ##For 1st Loop do Until x = i  
        $events = @()  
        $gatherEvents = @()  
        $eventsArray = @()  
        $searchResult = @()  
        $MaxEvents = 99  
  
        #Loading/Gathering Events Loop...  
        do {  
       
            ##Getting Events w/ Get-WinEvent         
            $gatherEvents = Get-WinEvent -Path $evtPaths[$x].FullName -MaxEvents $MaxEvents -EA SilentlyContinue  
            $events = $events + $gatherEvents             
  
            $x++  
              
            }  
             Until ($x -eq $i)      
  
        $x = $x +1 ##Total Events Found!  
          
        $eventsLength = $events.Length ##Total events catalogged!  
          
        $xx = 0  
               
        # Write Event Properties to a row and roll it out - Collapsing Array ...   
        do {  
               $date = $events[$xx].TimeCreated | Get-Date -Format "yyyyMMdd".ToString() -EA SilentlyContinue ##EA SC for Blank Entries  
                  
                $eventRow = new-object PSObject -Property @{  
                Date = $date;  
                Id = $events[$xx].Id;  
                Level = $events[$xx].LevelDisplayName;  
                Provider = $events[$xx].ProviderName;  
               Message = $events[$xx].Message;  
                }  
  
                $cRow = $date + " " + "ID:" +  $events[$xx].Id + " " + "Level:" + $events[$xx].LevelDisplayName + " " + "Provider:" + $events[$xx].ProviderName + " " + "Message:" + $events[$xx].Message   
                $eventsArray += $cRow  
               
                $xx++  
                $d++  
        }  
        Until ($xx -eq $events.Length)  
 
        ##Looking for patterns error or fail in $eventsArray  
        $search = $eventsArray | Select-String -pattern ("error|fail") 
 
        Return $search ## | Write-Output ##Output for job  
  
        } ## End $EventSearchJob  
  
    Start-Job -Name EventSearchJob -ScriptBlock $EventSearchJob  
  
    } ## End function Event-Search  
  
  
function writeSearch  ##   
    {  
        ##Event Logs Cont.  
        MD $tempDir\LOGS\EVTX\ -EA SilentlyContinue 
 
        ##output to file  
        $search | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name -Wrap > TOP-ERRORS.TXT  
        $search > $tempDir\LOGS\SEARCH.TXT  
  
    if($Global:eventOut -eq $True)  
        {  
        $search | Group-Object | Sort-Object Count -Descending |   
            Select-Object -Property Count, Name | Out-GridView -Title "Top `"Errors`" via EVTX - V-$Ver"  
        }  
  
        wh "`n Collecting Matching EVTX Entries ...`n"     
        #Collecting all prev matching EVTX  
        #$evtx = Get-ChildItem C:\Windows\System32\Winevt\Logs\*.evtx  
        $evv = 0  
                  
           $providerName =   
               (($search | Select-String "Provider:.*Message:").Matches.Value -Replace   
                      " Message:", "" -Replace "Provider:", "" | Group-Object ).Name  
              
            #Converting Provider Name to Log Name                 
            $providerName = (($providerName | ForEach-Object {Get-WinEvent -ProviderName $_ -MaxEvents 1 -EA SilentlyContinue}).LogName | Group-Object).Name     
               $providerName = $providerName -replace "Microsoft.", ""  
                  $providerName = $providerName -replace "Windows.", ""  
                     $providerName = $providerName -replace "`/.*$", ""  
                           
                           
                         $evtx = $providerName | foreach{Get-ChildItem "C:\Windows\System32\winevt\logs\*$_*"}  
  
                Do{  
                    COPY $evtx[$evv].PSPath $tempDir\LOGS\EVTX\ 
                       $evv++  
                  }  
                  Until($evv -eq $evtx.Count)  
  
    } #End function writeSearch  
  
  
function GetUpdates  
    {  
        wh "`n Starting Get-WindowsUpdateLog Job-Function ...`n"  
        $updateJob = {get-WindowsUpdateLog}  
         
        if((Get-Host).Version.Major -cge 5) ##Modern Gatherer  
        {  
            Start-Job -Name GetUpdates -ScriptBlock $updateJob  
        }  
          
        ##Legacy Gatherer  
        CP C:\Windows\WindowsUpdate.log $tempDir\LOGS\WindowsUpdate.log  
  
        ##Installed-Updates/Packages 
        Get-WmiObject win32_quickfixengineering > $tempDir\LOGS\Installed_Updates.TXT  
        Get-WmiObject Win32_OperatingSystemQFE >> $tempDir\LOGS\Installed_Updates.TXT  
    DISM /Online /Get-Packages /Format:Table >> $tempDir\LOGS\Installed_Updates.TXT 
  
    } ## End function Get-Updates  
  
       
function PrinterCheck  
    {  
        wh "`n Getting Printer Information ..."  
        get-printer | ft Name, ComputerName, Type, DriverName, PortName, Datatype, Location, DriverName > $tempDir\LOGS\Printers.TXT  
        get-printerDriver | fl >> $tempDir\LOGS\Printers.TXT  
        Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
        Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers" | Out-File $tempDir\LOGS\Printers.TXT -Append  
        Get-ChildItem -Recurse Registry::"HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors" | Out-File $tempDir\LOGS\Printers.TXT -Append  
        write-output "## CBS ntprint CHECK ##" >> $tempDir\LOGS\Printers.TXT  
        $cbsCheck = (Get-ChildItem C:\Windows\Logs\CBS\*cbs* -Recurse | select-string -Pattern "E_INVALIDARG in eventsXml.*Microsoft-Windows-PrintService")  
        if($cbsCheck.Count -eq 0){Write-Output "## NO MATCHES IN CBS ##" >> $tempDir\LOGS\Printers.TXT} Else{$cbsCheck | Group-Object  >> $tempDir\LOGS\Printers.TXT}  
        write-output "## ntprint.dll CHECK ##" >> $tempDir\LOGS\Printers.TXT  
        (Get-ChildItem C:\Windows\System32\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
        (Get-ChildItem C:\Windows\SysWOW64\ntprint.dll).VersionInfo | ft -AutoSize >> $tempDir\LOGS\Printers.TXT  
  
    } ## End function PrinterCheck  
  
  
function UpdateHelper  
    {  
    if((Get-Host).Version.Major -cge 5)  
        {  
            $winupdatelog = get-item $tempDir\LOGS\windows-update.log    ##WIN-10 File  
            MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue | Out-Null  
            CP C:\Windows\Logs\WindowsUpdate\*.etl $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
        }  
            Else{$winupdatelog = get-item $tempDir\LOGS\windowsupdate.log} ##LEGACY File  
  
    $updateError = ($winupdatelog | select-string -pattern "error.*0x........");  
    $updateErrorSplit = $updateError -Split " "  
    $updateErrorCount = (($updateErrorSplit | select-string -pattern "0x........") -Replace "[(),'`.:]", "" -Replace "hr=", "");  
  
    $updateErrorCount | Group-Object | Sort-Object Count -Descending | Format-Table Count, Name | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT -Width 999  
    $updateError >> UPDATE-ERRORS.TXT  
    if($updateError.length -eq 0){"No `"error.*0x........`" patterns Found in Windows-Update.log" | Out-File $tempDir\LOGS\UPDATE-ERRORS.TXT}  
  
    ($winupdatelog | Select-String "KB\d\d\d\d\d\d\d" | Select-string "fail") | Out-file $tempDir\LOGS\UPDATE-ERRORS.TXT -Append -width 999  
  
    } ## End function UpdateHelper  
  
  
function getProcesses  
    {  
    wh "`nGetting Active Process ...`n"   
    Get-Process > $tempDir\LOGS\Running-Processes.TXT  
    CMD.EXE /C "tasklist /svc" | Out-File -Append  $tempDir\LOGS\Running-Processes.TXT  
      
    } ## End function getProcesses  
  
  
function GetApps  
    {  
    wh "`n Getting List of Installed Apps...`n"  
    Get-WmiObject -Class Win32_Product | Format-Table -Property Name, Version, Vendor > $tempDir\LOGS\Installed-Apps.TXT  
    Get-AppxPackage | ft Name, Version, InstallLocation, IspArtiallyStaged, SignatureKind, Status >> $tempDir\LOGS\Installed-Apps.TXT  
      
    } ## End function GetApps  
  
  
function SetupLogs  
    {  
    wh "`nGetting Windows Setup Logs Independent of SetupDiage.exe...`n"  
        MD $tempDir\LOGS\SETUP\ -EA SilentlyContinue  
    dir C:\ > $tempDir\LOGS\Dir_Structure.txt  
      
    ## Main Setup Collection  
    if($env:SystemDrive -eq 'C:') ##Verify SystemDrive  
    {  
        $SetupPaths = @()  
  
        $locations = @(  
            'C:\GetCurrent',  
            'C:\$Reset',  
            'C:\$SysReset',  
            'C:\$Windows.~BT',  
            'C:\$Windows.~WS',  
            'C:\Windows\Logs\',  
            'C:\Windows\Panther\',  
            'C:\Windows\inf\',  
            'C:\Windows\System32\LogFiles\',  
            'C:\Windows\System32\SysPrep\',  
            'C:\Windows10Upgrade',  
            'C:\Windows.old\Windows\Panther')  
  
        for($i = 0; $locations.count -gt $i; $i++)  
        {   
            if((get-item $locations[$i] -Force -EA SilentlyContinue).length -gt 0) ##Null Path Check -Force for Hidden  
            {  
                CD $locations[$i]  
                ##Search includes setuperr/setupact only  
                $SetupPaths += Get-ChildItem * -Force -Recurse -Include setuperr.log, setupact.log, miglog.xml, *APPRAISER_Humanreadable.xml -EA SilentlyContinue      
            }  
        }  
  
        $cleanPaths = @()  
  
        for($i = 0; $SetupPaths.count -gt $i; $i++)  
        {  
            $cleanPaths += $SetupPaths[$i].PSParentPath.ToString() -replace "Microsoft\.PowerShell\.Core\\FileSystem\:\:C\:\\", ""  
        }  
  
        CD $tempDir\LOGS\SETUP\  
        MD $cleanPaths -Force  
        CD $tempDir\LOGS\  
  
        for($i = 0; $SetupPaths.count -gt $i; $i++)  
        {  
            $destPath = "$tempDir\LOGS\SETUP\" + $cleanPaths[$i]  
            $copyPathLog = ($SetupPaths[$i].ToString())  
              
            Copy  $copyPathLog -Destination $destPath  
        }  
      
    }Else{Write-Host "`nSystem Drive is not C:... Setup Collection Aborted!`n"}  
    ## End Main Setup Collection  
      
          
        ## Setup Reg Output      
        Get-ChildItem HKLM:\SYSTEM\SETUP\ | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT  
        Get-ChildItem HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\OOBE\Me* -recurse -EA SilentlyContinue | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
        Get-Childitem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate | Out-File $tempDir\LOGS\SETUP\HKLM_SYSTEM_SETUP-OOBE.TXT -Append  
  
        ## SetupAct String Search  
  
  
          
         $setupRegx = @("MOUPG SetupHost..Initialize:",  
                        "============================",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Initialize. CmdLine"),  
                        "",  
                        "MOUPG Setup build & Host OS Build:",  
                        "==================================",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG  SetupHost..Setup build"),  
                        "...",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MOUPG      Host OS"),  
                        "",  
                        "Watson Parameters (4&5):",  
                        "=======================",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Watson Bucketing Parameters\[[4-5]\]" ),  
                        "",  
                        "\[0x........\]Error:",  
                        "==================",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "\[0x........\]\[0x.....\]"),  
                        "",  
                        "`"FATAL`":",  
                        "======",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "FATAL" | Select-String -NotMatch "FatalExecutionEngineError" | Select-String -NotMatch "non-fatal"),  
                        "",  
                        "`"Error   `":",  
                        "===========",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "Error   "),  
                        "",  
                        "MIGRATE.*DATA:",  
                        "==============",  
                        "",  
                        (Get-ChildItem $tempDir\LOGS\*setupact.log -Recurse | Select-String "MIGRATE.*DATA"),  
                        ""             
                        )  
            $q=0  
            Do {$setupRegx[$q] | Out-File $tempDir\LOGS\SETUP\SetupAct-Regex.TXT -Append -Width 999 ##spool out results  
                                  $q++                    
                                            }Until($q -eq $setupRegx.Count)  
  
    } ## End function SetupLogs  
  
  
function powerCFGInfo  
    {  
    MD $tempDir\LOGS\POWER\ -EA SilentlyContinue  | Out-Null  
    wh "`n Grabbing PowerCFG, Sleep & Battery Info ...`n"  
      
    ("`n" + "Available Sleep States (/A): `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg /a | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "-DeviceQuery Wake_Armed: `r" + "`n" +"========================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg -devicequery wake_armed  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "Last Wake (-lastwake):  `r" + "`n" +"=====================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg -lastwake  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "-Requests: `r" + "`n" +"==========`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    powercfg -requests  | Out-file -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    $powerList = powercfg -list  
    $powerList | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    $powerActive = $powerList | select-string "\*" | powercfg /QH "$_"   
    ("`n`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
    ("`n" + "Active Power Scheme Details: `r" + "`n" +"============================`r" + "`r").ToString() | Out-File -Append -Encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
    $powerActive | Out-File -Append -encoding ascii $tempDir\LOGS\POWER\POWERCFG_INFO.txt  
  
  
    if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support powercfg /battery /sleepstudy  
         {   
           $ifbattery = Get-WmiObject win32_battery  
           if ( $ifbattery.__SERVER.count -cge 1 ) { CMD.EXE /C "powercfg /batteryreport /output %temp%\LOGS\POWER\battery-report.html" }  
           CMD.EXE /C "powercfg /sleepstudy /output %temp%\LOGS\POWER\sleepstudy-report.html"  
         }  
           CMD.EXE /C "powercfg /ENERGY /duration 10 /output %temp%\LOGS\POWER\energy-report.html"         
      
    } ## End function powerCFGInfo  
  
  
function sysProductCheck  
    {  
    wh "`n Getting SystemProductName ...`n"  
    ##SystemInformation Reg   
    reg query HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\SystemInformation\ /v SystemProductName  > $tempDir\LOGS\REG_SystemProductName.TXT   
    Get-WmiObject Win32_ComputerSystem > $tempDir\LOGS\WMI_Object_System.TXT  
    Get-WmiObject Win32_ComputerSystemProduct >> $tempDir\LOGS\WMI_Object_System.TXT  
      
    } ## End functions sysProductCheck  
  
  
function showWLAN  
    {  
    wh "Generating NETSH WLAN Report...`n"  
  
    $showWLANjob = {  
                    CMD.EXE /c "netsh wlan show networks mode=ssid > %temp%\LOGS\Network\wlan.txt"  
                    CMD.EXE /c "netsh wlan show networks mode=bssid >> %temp%\LOGS\Network\wlan.txt"  
                    CMD.EXE /c "netsh winhttp show proxy > %temp%\LOGS\Network\proxy.txt"  
                    CMD.EXE /c "netsh wlan show wlanreport & COPY C:\ProgramData\Microsoft\Windows\wlanReport\wlan-report-latest.html %temp%\LOGS\Network\wlan-report-latest.html"   
                    ##WIN7 Does not Support netsh wlanreport                                                    
                    }   
  
    Start-Job -Name showWLAN -ScriptBlock $showWLANjob  
  
    } ## End function sysProductCheck  
  
  
function getGPRESULT  
    {  
    wh "`nGetting GPRESULT...`n"  
    CMD.EXE /C "GPRESULT /V > %temp%\LOGS\GPRESULT.TXT"  
      
    } ## End function getGPRESULT  
  
  
function reservedCheck  
    {       
         
    $reservedJob =   
        {  
        $vol = (mountvol /L | select-string -Pattern "\\\\")  
        $volstring = "mountvol y:" + $vol[0]  
        CMD.EXE /C $volstring  
      
        SLEEP 2  
  
        CMD.EXE /C "CHKDSK y: > %temp%\LOGS\SystemReserved.TXT"  
      
        SLEEP 2 # Pause after drive dismount  
      
        CMD.EXE /C "mountvol y: /D"  
        }  
  
    Start-Job -Name reservedJob -ScriptBlock $reservedJob  
      
    } ## End function reservedCheck  
  
  
function fltmcCheck  
    {  
    wh "`n Getting fltmc Filters ...`n"  
    CMD.EXE /c "fltmc filters > %temp%\LOGS\fltmc_filters.TXT"  
      
    } ## End function fltmcCheck  
  
  
function getDXDiag  
    {  
    wh "`n Grabbing DXDiag Info...`n"  
    C:\Windows\System32\dxdiag /x $explore\DxDiag  
      
    } ## End function getDXDiag  
  
  
function getMSINFO  
    {  
    wh "`n Gathering MSINFO32 ...`n"  
    ## check if msinfo is already gathering - if so stop  
    If((get-process | select-string -Pattern "msinfo").Pattern -eq "msinfo")  
    {Stop-Process -ProcessName msinfo32}  
  
        C:\Windows\System32\msinfo32.exe /nfo $tempDir/LOGS/MSINFO32.NFO  
                 
    } ## End function getMSINFO  
  
  
function getAV  
    {  
     if((Get-Host).Version.Major -cge 5) ##Modern OS Only  
        {  
        wh "`n Grab root\SecurityCenter2 AntivirusProduct ...`n"  
        $avPath = (Get-WmiObject -Namespace root\SecurityCenter2 -Class AntivirusProduct) | % {$_.pathtoSignedProductEXE}  
        "AV Info" + "`n========" | Out-File $tempDir/LOGS/SecurityProductInformation.TXT 
    $avPath | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
        if($avPath[0] -match "exe")  
            {   
                $path = (Get-Item $avPath[0]).PSParentPath  
                Get-Item $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append  
                Get-Content $path/*.ini | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append             
            }  
            Get-ChildItem "HKLM:\SOFTWARE\Policies\Microsoft\Windows Defender\" -recurse -EA SilentlyContinue | Out-File $tempDir/LOGS/SecurityProductInformation.TXT -Append      
        }  
    } ## End function getAV  
  
  
function getDrivers  
    {  
    wh "`n Grabbing Driver listing via DISM.EXE ...`n"  
        $drivers = cmd.exe /C "dism /online /get-drivers /format:table"  
        $drivers += cmd.exe /C "dism /online /get-drivers /all /format:table"  
        $drivers | Out-File $tempDir/LOGS/DISM-Get-Drivers.TXT  
    wh "`n Done!`n"  
    } ## End Function getDrivers  
  
  
function getMISCLogs  
    {  
        wh "`nCopying misc. logs ...`n"   
        MD $tempDir\LOGS\WER\ -EA SilentlyContinue   
        MD $tempDir\LOGS\Windows\Logs\WindowsUpdate\ -EA SilentlyContinue  
        CP "C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\*" $tempDir\LOGS\WER\ -Recurse -EA SilentlyContinue  
        CP "C:\Windows\Logs\CBS\*cbs*" $tempDir\LOGS\Windows\Logs\  
        CP "C:\Windows\Logs\DISM\*dism*" $TempDir\LOGS\Windows\Logs\  
        CP "C:\Windows\Logs\WindowsUpdate\*" $TempDir\LOGS\Windows\Logs\WindowsUpdate\  
  
            
        #DMP Collect  
        $dmp = @()  
        $dmp += Get-ChildItem C:\Windows\*.dmp   
        $dmp += (Get-ChildItem C:\Windows\LiveKernelReports\*.dmp -Recurse -EA SilentlyContinue)  
        $dmp += (Get-ChildItem C:\Windows\Minidump\*.dmp -Recurse -EA SilentlyContinue)  
        #Validate empty array  
        if($dmp.length -ne 0)  
            {  
            $dd=0  
                  Do{       
                        If($dmp[$dd].length -lt 2000000)  
                            { $destPath = $dmp[$dd].PSParentPath.Replace('C:\', '').Replace('Microsoft.PowerShell.Core\FileSystem::', '')  
                                MD $destPath -EA SilentlyContinue 
                                    COPY -Path $dmp[$dd].PSPath -Destination $destPath }  
                        $dd++  
                    }  
                    Until($dd -eq $dmp.Count)  
            }  
 
         #disk info 
         "`nGet-Disk:`n=========" > $tempDir\LOGS\Disk-Info.TXT  
         Get-Disk |fl >> $tempDir\LOGS\Disk-Info.TXT 
         "`nGet-Partition:`n==============" >> $tempDir\LOGS\Disk-Info.TXT  
         Get-Partition >> $tempDir\LOGS\Disk-Info.TXT 
         Manage-bde -protectors -get C: >> $tempDir\LOGS\Disk-Info.TXT 
         "`nIO Fail Search:`n===============`n" >> $tempDir\LOGS\Disk-Info.TXT 
         $search | Select-String ".*io.fail.*" | Select-String -NotMatch '0, 0, 0, 0' >> $tempDir\LOGS\Disk-Info.TXT        
  
    } ## End function getMISCLogs  
  
  
function bingCollect  
    {  
        ##O365 Firewall Check & Bing.com diagnostics.asp  
        ##URIs based on Article:   
        ##https://support.office.com/en-us/article/Network-requests-in-Office-365-ProPlus-and-Mobile-eb73fcd1-ca88-4d02-a74b-2dd3a9f3364d  
                
        MD $TempDir\LOGS\Network\ -EA SilentlyContinue  
  
        wh "Performing Bing & O365 URI Check ... `n"  
  
  
              $bingCheck = (Invoke-WebRequest -Uri https://www.bing.com/fdv2/diagnostics.aspx -UseBasicParsing)   
              $bingCheck | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT  
                 
              $URIs = @('api.login.microsoftonline.com',    #0  Standard Reply = 403  
              'api.passwordreset.microsoftonline.com',      #1  Standard Reply = 200  
              'becws.microsoftonline.com',                  #2  Standard Reply = 403  
              'clientconfig.microsoftonline-p.net',         #3  Standard Reply = 404  
              'companymanager.microsoftonline.com',         #4  Standard Reply = 403  
              'device.login.microsoftonline.com',           #5  Standard Reply = 200  
              'graph.microsoft.com',                        #6  Standard Reply = 404  
              'hip.microsoftonline-p.net',                  #7  Standard Reply = 404   
              'hipservice.microsoftonline.com',             #8  Standard Reply = 404  
              'login.microsoft.com',                        #9  Standard Reply = 200  
              'login.microsoftonline.com',                  #10 Standard Reply = 200  
              'logincert.microsoftonline.com',              #11 Standard Reply = 200   
              'loginex.microsoftonline.com',                #12 Standard Reply = 200  
              'login-us.microsoftonline.com',               #13 Standard Reply = 200  
              'login.microsoftonline-p.com',                #14 Standard Reply = 200  
              'login.windows.net',                          #15 Standard Reply = 200  
              'nexus.microsoftonline-p.com',                #16 Standard Reply = 403  
              'passwordreset.microsoftonline.com',          #17 Standard Reply = 200  
              'provisioningapi.microsoftonline.com',        #18 Standard Reply = 403  
              'stamp2.login.microsoftonline.com',           #19 Standard Reply = 200  
              'ccs.login.microsoftonline.com',              #20 Standard Reply = 401  
              'ccs-sdf.login.microsoftonline.com',          #21 Standard Reply = 401  
              'accounts.accesscontrol.windows.net',         #22 Standard Reply = 200  
              'secure.aadcdn.microsoftonline-p.com',        #23 Standard Reply = 400  
              'windows.net',                                #24 Standard Reply = 200  
              'phonefactor.net',                            #25 Standard Reply = 200  
              'account.activedirectory.windowsazure.com',   #26 Standard Reply = 404  
              'secure.aadcdn.microsoftonline-p.com',        #27 Standard Reply = 400  
              'login.windows.net',                          #28 Standard Reply = 200  
              'provisioningapi.microsoftonline.com',        #29 Standard Reply = 403  
              'mscrl.microsoft.com',                        #30 Standard Reply = 400  
              'secure.aadcdn.microsoftonline-p.com',        #31 Standard Reply = 400  
              'windowsupdate.microsoft.com',                #32 Standard Reply = 200  
              'update.microsoft.com',                       #33 Standard Reply = 200  
              'au.download.windowsupdate.com',              #34 Standard Reply = 200  
              'download.windowsupdate.com',                 #35 Standard Reply = 200  
              'download.microsoft.com',                     #36 Standard Reply = 200  
              'tlu.dl.delivery.mp.microsoft.com');          #37 Standard Reply = 403  
          
                 
              $count = 0;  
              $queryResult =@{};  
                 
              Write-Host "Checking URIs .." -NoNewline  
                 
              Do {           
                      Try{  
                      $queryResult[$count] = (Invoke-WebRequest -Uri ("http:`/`/" + $URIs[$count]) -Method Head -UseBasicParsing -TimeoutSec 2).RawContent  
                         }Catch{ $catch = $_ }  
                 
                          if($queryResult[$count].Count -eq 0)  
                                  {$queryResult[$count] = ($catch[$catch.count -1].ToString()).Replace("`n", " ")}                                     
                      Write-Host "." -NoNewline           
                      $count++         
                  }Until ($count -eq ($URIs.Count));                            
              Write-Host "."  
                  
                  Get-Date | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                  $queryResult | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
                    
        Write-Host " Bing Check", `n, "==========" | Out-File $tempDir\LOGS\Network\O365-URL-Query.TXT -Append  
        
              wh "`n`n`n`URL Check Finished...`n"   
    }  
  
  
function smbConfig  
{  
  
    $CMDs =  
    {   cmd.exe /c "net config server"    
        cmd.exe /c "net config workstation"  
        Get-SmbClientNetworkInterface  
        Get-SmbServerConfiguration  
        Get-SmbClientConfiguration  
        Get-ChildItem "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer"   
        Get-NetAdapterAdvancedProperty | ft }  
  
    ForEach-Object{Invoke-Command $CMDs | Out-File $TempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
  
    $share = Get-SmbShare  
  
    ForEach-Object{Get-SmbShareAccess $share.Name | ft  | Out-File $tempDir\LOGS\NETWORK\$env:COMPUTERNAME-SMB-Config.TXT -Append}  
  
} ## End Function smbConfig  
  
  
function regLang  
    {       
        DISM.EXE /Online /Get-Intl  | Out-File $tempDir\LOGS\Reg-Lang.TXT  
        "`n","Get-WinUserLanguageList","=======================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        Get-WinUserLanguageList     | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        "`n","Get-WinLanguageBarOption","========================" | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
        Get-WinLanguageBarOption    | Out-File $tempDir\LOGS\Reg-Lang.TXT -Append  
    }  
  
  
function autoRotate  
    {  
        Get-ChildItem HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\Auto* | Out-File $tempDir\LOGS\AutoRotate.TXT  
    }  
  
  
function checkBoxes  
   {  
        Add-Type -AssemblyName System.Windows.Forms  
        Add-Type -AssemblyName System.Drawing  
  
        $Global:form = New-Object System.Windows.Forms.Form  
        $Global:form.Text = "LOGS-V$ver"  
        $Global:form.Size = New-Object System.Drawing.Size(300,400)  
        $Global:form.StartPosition = 'CenterScreen'  
  
        $OKButton = New-Object System.Windows.Forms.Button  
        $OKButton.Location = New-Object System.Drawing.Point(100,300)  
        $OKButton.Size = New-Object System.Drawing.Size(75,23)  
        $OKButton.Text = 'OK'  
        $OKButton.DialogResult = [System.Windows.Forms.DialogResult]::OK  
        $Global:form.AcceptButton = $OKButton  
        $Global:form.Controls.Add($OKButton)  
         
        $Global:form.ControlBox = $false  
          
            $Global:boxNum = 1  
            $Global:checkBox = @{} #hash for $checkBox  
            $tag = @{} #hash for $label  
            $Global:Box = @{}  
  
            function createCheckBox   
                {  
                    Param ( [parameter (Mandatory = $true)][string]$name,  
                            [parameter (Mandatory = $true)][string]$label )  
                      
                    $drawingPoint = (50 + ($boxNum *25))  
  
                    $Global:checkBox[$boxNum] = New-Object System.Windows.Forms.CheckBox  
                    $Global:checkBox[$boxNum].Location = New-Object System.Drawing.Point(10,$drawingPoint)  
                    $Global:checkBox[$boxNum].Size = New-Object System.Drawing.Size(15,15)  
                    $Global:checkBox[$boxNum].Text = ''  
                    $Global:checkBox[$boxNum].Checked = $true  
                    $Global:form.Controls.Add($checkBox[$boxNum])  
                    #SetupDiag Label  
                    $tag[$boxNum] = New-Object System.Windows.Forms.Label  
                    $tag[$boxNum].Location = New-Object System.Drawing.Point(40,$drawingPoint)  
                    $tag[$boxNum].Size = New-Object System.Drawing.Size(280,20)  
                    $tag[$boxNum].Text = "$label"  
                    $Global:form.Controls.Add($tag[$boxNum])  
  
                    $Global:boxNum ++  
                  
                } #End nested function createCheckBox   
            
            createCheckBox -name "EV" -label "EventSearch EventLog Helper"       #1  
            createCheckBox -name "SD" -label "SetupDiag.EXE Setup Diagnostics"   #2  
            createCheckBox -name "WU" -label "Get-WindowsUpdateLog Collection"   #3  
            createCheckBox -name "IP" -label "Network Information"               #4  
            createCheckBox -name "PW" -label "POWERCFG. Sleep & Battery Info"    #5  
            createCheckBox -name "GP" -label "GPResult Info"                     #6  
            createCheckBox -name "MS" -label "General Machine Info"              #7  
            createCheckBox -name "EO" -label "EventSearch Out-GridView"          #8            
                 
            #Checkbox State Changes               
            $Global:checkBox[1].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[1].checked -eq $True){ $Global:EventsCollect = $true ; Write-Host "." -nonewline} Else{ $Global:EventsCollect = $false }  
                              
                    })             
            $Global:checkBox[2].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[2].checked -eq $True){ $Global:SetupDiagCollect = $true ; Write-Host "." -nonewline} Else{ $Global:SetupDiagCollect = $false }  
                              
                    })  
            $Global:checkBox[3].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[3].checked -eq $True){ $Global:UpdatesCollect = $true ; Write-Host "." -nonewline} Else{ $Global:UpdatesCollect = $false }  
                              
                    })  
            $Global:checkBox[4].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[4].checked -eq $True){ $Global:WLANCollect = $true ; Write-Host "." -nonewline} Else{ $Global:WLANCollect = $false }  
                              
                    })  
  
            $Global:checkBox[5].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[5].checked -eq $True){ $Global:PowerCollect = $true ; Write-Host "." -nonewline} Else{ $Global:PowerCollect = $false }  
                              
                    })  
            $Global:checkBox[6].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[6].checked -eq $True){ $Global:GPCollect = $true ; Write-Host "." -nonewline} Else{ $Global:GPCollect = $false }  
                              
                    })  
            $Global:checkBox[7].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[7].checked -eq $True){ $Global:miscCollect = $true ; Write-Host "." -nonewline} Else{ $Global:miscCollect = $false }  
                              
                    })  
  
             $Global:checkBox[8].Add_CheckStateChanged(  
                    {   
                        if($Global:checkBox[8].checked -eq $True){ $Global:eventOut = $true ; $Global:checkBox[1].checked = $true; Write-Host "x" -nonewline} Else{ $Global:eventOut = $false }  
                              
                    })  
                                           
        $Global:checkBox[8].Checked = $false  
        $mainText = New-Object System.Windows.Forms.Label  
        $mainText.Location = New-Object System.Drawing.Point(62,30)  
        $mainText.Size = New-Object System.Drawing.Size(260,20)  
        $mainText.Text = 'Choose which logs to collect:'  
        $Global:form.Controls.Add($mainText)  
        $result = $Global:form.ShowDialog()  
        SLEEP 1  #testing Topmost lag  
        $Global:form.Topmost = $true  
  
        #OK Button ...   
        if ($result -eq [System.Windows.Forms.DialogResult]::OK)  
        {  
            $x = $textBox.Text  
            $x  
        }       
  
    } #End function checkBoxes  
  
  
Function werHint  
{  
    $WERs = Get-ChildItem $tempDir\LOGS\WER\*.wer -Recurse  
  
    $WERArray = @()  
  
    $Date = $WERs | Select-String -pattern "eventtime=" | % {$_ -Replace("C:.*EventTime=", "")}  
    $eventType = $WERs | Select-String -pattern "EventType=" | % {$_ -Replace("C:.*EventType=", "")}  
    $Sig0Nam = $WERs | Select-String -pattern "Sig\[0\].Name" | % {$_ -Replace("C:.*Sig\[0\].Name=", "")}  
    $Sig0Val = $WERs | Select-String -pattern "Sig\[0\].Value" | % {$_ -Replace("C:.*Sig\[0\].Value=", "")}  
    $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
    $Sig3 = $WERs | Select-String -pattern "Sig\[3\].Value" | % {$_ -Replace("C:.*Sig\[3\].Value=", "")}  
    $Sig4 = $WERs | Select-String -pattern "Sig\[4\].Value" | % {$_ -Replace("C:.*Sig\[4\].Value=", "")}  
  
    #ConvertDateTime  
    $epoch = [datetime]"01/01/1601 00:00"  
    $date = $date | foreach{$epoch.AddSeconds($_/10000000)}   
    $convertedDate = foreach($Date in $Date) {Get-Date $Date -Format G}  
  
    $WERarray = 0..($convertedDate.Length -1) | Select-Object @{n="Id";e={$_}},   
        @{n="Date";e={$convertedDate[$_]}}, @{n="EventType";e={$eventType[$_]}},  
            @{n="S0-Name";e={$Sig0Nam[$_]}}, @{n="S0-Value";e={$Sig0Val[$_]}}, @{n="S3";e={$Sig3[$_]}},   
                @{n="S4";e={$Sig4[$_]}}  
  
    $WERArray |Sort-Object -Descending Date | ft -autosize Date, EventType, S0-Name, S0-Value, S3, S4  |   
        Out-File $tempDir\LOGS\WER-SUMMARY.TXT -Width 500  
  
} ## End Function werHint  
  
  
  
### FUNCTIONS_INIT ###   
  
        $Script:Cancel = @{}  
  
        StartScript #function  
        checkBoxes  
          
        ## SetupDiagCollect   #2  
        if($Global:SetupDiagCollect -eq $True)  
            {  
            SetupDiagFunc #function & job   
            wh "...`n"  
            }  
        ## EventSearch         #1  
        if($Global:EventsCollect -eq $True)  
            {  
            EventSearch #function & job  
            wh "...`n"  
            }  
  
        ## Get-WindowsUpdate   #3  
        if($Global:UpdatesCollect -eq $True)  
            {  
            GetUpdates #function & job  
            wh "...`n`n"  
            }  
  
        ## WLAN/Wifi Collect    #4  
        if($Global:WLANCollect -eq $True)      
            {  
            bingCollect #function  
            wh "...`n"  
            showWLAN #function & job   
            wh "...`n"  
            smbConfig #function  
            }  
  
        ## Power/Battery Collect:#5  
        if($Global:PowerCollect -eq $True)  
            {  
            powerCFGInfo #function - make job takes a min  
            wh "...`n"  
            }  
  
        ## GPRESULT Collection:  #6  
        if($Global:GPCollect -eq $True)  
            {  
            getGPRESULT #function  
            wh "...`n"  
            }  
  
        ## Misc Logs Collection: #7        
        if($Global:miscCollect -eq $True)  
            {  
            getMSINFO #function & job  
                wh "...`n"  
            PrinterCheck #function  
                wh "...`n"  
            getProcesses #function  
                wh "...`n"  
            getApps #function - make job - takes a min  
                wh "...`n"  
            SetupLogs #function  
                wh "...`n"       
            sysProductCheck #function  
                wh "...`n"                 
            reservedCheck #function  
                wh "...`n"  
            fltmcCheck #function  
                wh "...`n"  
            getDXDiag #function  
                wh "...`n"  
            regLang #function  
                wh "...`n"  
            autoRotate #function  
            getMISCLogs #function  
                wh "...`n"  
            getDrivers #function  
                wh "...`n"   
            getAV #function  
                wh "...`n"            
             }  
        
  
#### RECEIVING JOBS SECTION ###...   
  
        #EventSearchJob  
        if($Global:EventsCollect -eq $True)  
        {          
            wh "`nWaiting for EventSearchJob to complete...`n"  
  
            Receive-Job -Name EventSearchJob -OutVariable eventSearch -Wait   
            $search = $eventSearch.Line  
        }  
  
  
        if($Global:SetupDiagCollect -eq $True)  
        {  
            #SetupDiagJob - Receive-Job  
            $stamp = (Get-Date -format "hh:mm tt")  
            wh "`nWaiting for SetupDiagJob to complete..."  
            wh "`nTime Stamp: $stamp"  
            wh "`nThis can take up to 10 minutes ..."  
  
            Do{  
              SLEEP 15  
                wh "."  
                if((Get-Job -name SetupDiagJob).State -eq "Completed")  
                    { Receive-Job -Name SetupDiagJob  
                           wh "`nSetupDiag Completed!"                         
                        Break                      }  
                                }Until($Cancel.SetupDiag -eq $True)  
            wh `n  
                                               
            #Receive file and copy  
            Receive-Job -Name SetupDiagJob -Wait   
            Copy-Item $tempDir\Logs*.zip $tempDir\LOGS\SetupDiag-Log.zip  
            Copy-Item $tempDir\setupdiag*.log $tempDir\LOGS\  
            Remove-Item $tempDir\Logs*.zip  
        }  
  
       
        if($Global:UpdatesCollect -eq $True)  
        {  
            #GetUpdates Job via:  
            #UpdateHelper <--- GetUpdates Job has to finish first!  
            #Checking Status of GetUpdates Job...  
            wh "Checking Status of GetUpdates Job...`n"  
            If ((Get-Job -Name GetUpdates).State -eq "Failed")  
                { wh "`nGetUpdates Job Failed!`n" }  
                    Else{  
                            Receive-Job -Name GetUpdates -wait  
                            Move $env:USERPROFILE\Desktop\WindowsUpdate.log $TempDir\LOGS\Windows-Update.log -Force  
                            wh "`n Writing Update Helper Info to UPDATE-ERRORS.TXT ... `n"  
                            UpdateHelper #run the update helper function  
                        }               
        } #End getting GetUpdates-job       
  
        #Finishing EventSearch  
        if($Global:EventsCollect -eq $True)  
            {  
                writeSearch #function  
            }  
  
#Wait on MSINFO...  
if($Global:miscCollect -eq $True)  
{  
    wh "`n Waiting for MSINFO32 to Complete ...`n"  
    do{ start-sleep 1 }  
    Until((get-process | select-string -Pattern "msinfo").Pattern -cne "msinfo")  
        werHint #function  
}  
  
  
if((Get-Host).Version.Major -cge 5) ##WIN7 Does not Support Transcript  
    {  
  
Stop-Transcript   
  
        do{  
    start-sleep 1  
    }  
    Until((get-item $tempDir\LOGS\Event-Search.TXT).Length -cne 0)  
      
    }  
  
wh "`nLog Collection Completed! `nLogs are available in %temp%\LOGS\`n"    
wh "`nHit Any Key or Close ...`n"  
  
Start-Sleep 1  
  
Start Explorer.exe $explore  
  
PAUSE  
  
## LOGS.PS1 1.6.3  ##     
## JOHNEM 8-2019 ##   
## EOF ##

Steve C · 23 Jun 2020

I hate that message "your device is not ready" when Windows is not ready for your device!

dalchina · 23 Jun 2020

0xC1900101-0x40017 Installation failed in the Second_Boot phase

https://docs.microsoft.com/en-us/win...upgrade-errors

Your Device Is Not Ready

No known way of finding out how to make it ready, alas. You can review the main points here:
Known and Resolved issues for Windows 10 May 2020 Update version 2004

- but could be something else.

Given it

is about 10 years old.

- it's unlikely to magically become ready e.g. by later drivers becoming available. You are running in unspecified territory at your own risk.

Even if an out of spec. older machine runs one build of Win 10, there's no guarantee whatsoever it won't have problems with the next. If that old PC runs 1909 successfully, I suggest you save time and effort and sleepless nights, and stay with 1909.

2004 probably doesn't add too much of interest, unless you want PIN sign in to Safe Mode and to chat to Cortana, say...
What is new in the Windows 10 May 2020 Update version 2004

AddRAM · 23 Jun 2020

I get the same message on my Z170, I think it`s hilarious, I don`t even want 2004 yet, so it`s fine with me. You can always install 2004 with the ISO File if you really wanted to.

Your Device Is not Ready Vs 2004-capture.jpg

spunk · 23 Jun 2020

As stated, my 10 year old desktop gets the message "Your Device is not Ready"
But both my 10 year old Desktop and the 6 month old Desktop both fail when upgrading thru the same ISO image with the message
0xC1900101-0x40017 Installation failed in the Second_Boot phase.The only factor that is the same is that each machine shares the same Image I created from the Old computer. The Drivers on the new computer are different.

dalchina · 23 Jun 2020

Thank you for your reply. Doesn't seem to move on from where you were given comments.

You may be aware of how unlikely it is that failure to upgrade can be readily resolved. See extensive threads by zbook e.g.

spunk · 23 Jun 2020

I have attached the results of the script in Post #3 from the 10 year old computer. Most of it didn't work.

zbook · 23 Jun 2020

1) Please upload each V2 and DM directly into this thread:
BSOD - Posting Instructions

2) Run setupdiag > post a share link for all files into the thread:
https://docs.microsoft.com/en-us/win...rade/setupdiag

3) Download and install: Everything
voidtools

4) Launch the application and search for these folders / files:

C:\Windows\Panther

Code:

folders:
\$Windows.~bt\sources\panther
\$Windows.~bt\Sources\Rollback
\Windows\Panther
\Windows\Panther\NewOS

setuperr.log
setupact.log
Setupmem.dmp
setupapi.dev.log
BlueBox.log
Event logs (*.evtx)
C:\$Windows.~BT\Sources\Rollback
$Windows.~bt\Sources\Rollback\setupmem.dmp
$Windows.~bt\Sources\Rollback\setupapi\setupapi.dev.log
$Windows.~bt\Sources\Rollback*.evtx
$Windows.~BT\Sources\Panther\UnattendGC
miglog.xml
Windows\Logs\Mosetup
Setupapi.offline.log