Driver Verifier violation loop - after turning it off - "X64_MEMORY_CO

  1.    08 Jan 2018 #1

    Driver Verifier violation loop - after turning it off - "X64_MEMORY_CO


    Good Morning,
    Intel Core i7-4770
    16GB Ram
    64x Windows 10

    A few weeks ago my computer started freezing sometimes and then dying, I reinstalled Windows 10 and the problem seems to have gone.

    It started once more and I followed a guide to enable Driver Verifier. After it crashed once more I got a BSOD. "Driver Verifier Violation Detected", in a loop over and over, which was good, I got the Minidump log.

    However, even after getting to the CMD prompt with the automatic repair and turning OFF Driver Verifier and deleting all the settings and making triple sure no drivers to check were selected, I kept getting the same BSOD.

    I had to resort to rolling back Windows 10 to an earlier safepoint, and now I am afraid to turn off my computer in case it won't start up again.

    I have the Minidump log here:
    Dropbox - 010718-5296-01.rar

    The result was "X64_MEMORY_CORRUPTION_LARGE", any help would be appreciated.
      My ComputerSystem Spec

  2. Caledon Ken's Avatar
    Posts : 11,113
    Windows 10 Pro x64 Build 1803
       08 Jan 2018 #2

    Hi alexbuer.

    Please post in the BSOD section, they know how to read dumps. Follow posting instructions.

    https://www.tenforums.com/bsod-crashes-debugging/

    As to turning on machine, you are not avoiding anything by keeping it shut off. At some point you have to turn it on.

    At worst you could re-install Windows. If you need to get your data off we can help. If you re-install I would suggest you tell Windows not to update your drivers. Sounds like you are good on the install and then one gets updated to point of not working.

    Option four of this tutorial.

    Enable or Disable Driver Updates in Windows Update in Windows 10


    Ken
      My ComputerSystem Spec


  3. Posts : 21,418
    windows 10 professional version 1607 build 14393.969 64 bit
       08 Jan 2018 #3

    1) In the left lower corner search type or copy and paste:
    verifier
    2) In the pop up: driver verifier manager > click delete existing settings > click finish > click yes
    This should turn windows driver verifier off.
    3) run this log collector and post a zip into the thread:
    log collector v2-beta06.zip
      My ComputerSystem Spec

  4.    09 Jan 2018 #4

    zbook said: View Post
    1) In the left lower corner search type or copy and paste:
    verifier
    2) In the pop up: driver verifier manager > click delete existing settings > click finish > click yes
    This should turn windows driver verifier off.
    3) run this log collector and post a zip into the thread:
    log collector v2-beta06.zip
    The verifier is, and was, off I got into the cmd and turned it off, deleted all the settings and made sure everything was unchecked. That did not stop it from displaying a BSOD with Driver Verifier Violation.
    The log is in the attachments
    Driver Verifier violation loop - after turning it off - "X64_MEMORY_CO Attached Files
      My ComputerSystem Spec


  5. Posts : 21,418
    windows 10 professional version 1607 build 14393.969 64 bit
       09 Jan 2018 #5

    Please update the system specs in the "My Computer" section:

    How To Fill Out Your System Specs
    System Specs - Fill in at Ten Forums:
    System Specs - Fill in at Ten Forums Site Use Tutorials
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, etc.)


    For all tests /steps please post images into the thread.
    If there are any problems posting images please use one drive or drop box share links.
    Share OneDrive files and folders - Office Support
    Upload photos and files to OneDrive - OneDrive


    1) Open administrative command prompt and type or copy and paste:
    2) sfc /scannow
    3) dism /online /cleanup-image /restorehealth
    4) chkdsk /scan
    5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    6) Make sure that there is no over clocking while troubleshooting.

    7) Sometimes there are problems in the bios that produce bsod.
    The BIOS: Version/Date American Megatrends Inc. M7848W08.108, 16/07/2013 SMBIOS Version 2.7
    8) Please check to see if this is the most up to date version.
    9) Open the website for the computer or motherboard manufacturer to view the drivers and post a URL or hyperlink into the thread.

    10) To ensure that there are no improper bios settings please reset the bios.
    11) Sometimes there can be failure to boot after resetting the bios.
    12) Backup the computer files to another drive or to the cloud.
    13) Make a backup image usig Macrium:
    Macrium Software | Macrium Reflect Free:
    Macrium Software | Macrium Reflect Free
    14) And please create a brand new restore point.

    How to Clear Your Computers CMOS to Reset BIOS Settings:
    How to Clear Your Computers CMOS to Reset BIOS Settings
    3 Ways to Reset Your BIOS - wikiHow:
    3 Ways to Reset Your BIOS - wikiHow

    15) In the left lower corner search type: system or system control > open system control panel > on the left pane click advanced system settings > on the advanced tab under startup and recovery click settings > post an image of the startup and recovery into the thread.
    > on the advanced tab under performance > click on settings > click on advanced tab > under virtual memory click on change > post an image of the virtual memory tab into the thread

    16) Update: hecix64.sys
    Intel Management Engine Interface
    Drivers & Software

    17) Run memtest86+ version 5.01 for at least 8 passes. Memtest86+ - Advanced Memory Diagnostic Tool
    This may take hours so plan to run it overnight.
    Please make sure you use the Memtest86+ version 5.01 with the link below.
    Memtest86+ - Advanced Memory Diagnostic Tool
    The testing is done not by time but by passes.
    The more passes the better.
    There are a significant number of false negatives if fewer than 8 passes are made.
    A false negative is a test pass when there is malfunctioning RAM.
    There is 16 GB of RAM on the computer.
    Memtest86+ version 5.01 testing takes approximately 1 - 2 hours /GB RAM
    Just 1 error is a fail and you can abort testing.
    Then test 1 RAM module at a time in the same DIMM each for 8 or more passes.
    When Memtest86+ has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.
    Memory problems. - Microsoft Community
    MemTest86+ - Test RAM BSOD Tutorials



    Code:
    Event[1333]:
      Log Name: System
      Source: Microsoft-Windows-WER-SystemErrorReporting
      Date: 2018-01-04T20:14:01.325
      Event ID: 1005
      Task: N/A
      Level: Error
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: DESKTOP-TTF5NE4
      Description: 
    Unable to produce a minidump file from the full dump file.

    Code:
    Event[259]:
      Log Name: System
      Source: Volsnap
      Date: 2017-12-25T00:39:00.828
      Event ID: 33
      Task: N/A
      Level: Information
      Opcode: N/A
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: DESKTOP-TTF5NE4
      Description: 
    The oldest shadow copy of volume C: was deleted to keep disk space usage for shadow copies of volume C: below the user defined limit.

    Code:
    Event[1907]:
      Log Name: System
      Source: Display
      Date: 2018-01-08T15:55:21.161
      Event ID: 4101
      Task: N/A
      Level: Warning
      Opcode: Info
      Keyword: Classic
      User: N/A
      User Name: N/A
      Computer: DESKTOP-TTF5NE4
      Description: 
    Display driver nvlddmkm stopped responding and has successfully recovered.

    HECIx64.sys
    Intel Management Engine Interface
    Drivers & Software



    Code:
    meix64	Intel(R) Management Engine Interface	c:\windows\system32\drivers\hecix64.sys	Kernel Driver	Yes	Manual	Running	OK	Normal	No	Yes
      My ComputerSystem Spec


 

Related Threads
Solved BSOD - Driver Verifier detected a violation in BSOD Crashes and Debugging
Hi all, so in the last couple of hours, had 3 or 4 BSODs with various messages, but the last one has been driver verifier one. Here are the messsages: Kernel Security Check Failure System T Read E - ATIKMdag.sys Driver verifier has detected a...
Driver Related BSOD - Driver Verifier in BSOD Crashes and Debugging
I recently started a new job and was given a new Dell Laptop. I am having seemingly randomly BSOD issues. Some days it doesn't happen at all and some days it can happen up to ten times. I've got several BSOD errors (mainly CRITICAL PROCESS DIED). I...
I have another post where people are helping me with BSODs on my gaming pc whenever I play games and they suggested I run driver verifier and send them the two more bsod minidump files. My question is once I enable driver verifier how long should I...
Windows Driver Verifier BSOD in BSOD Crashes and Debugging
So I have an old Alienware Aurora R1 and after about 5 years the liquid cooling tube burst and fried the motherboard. I figured it was time for an upgrade anyway, but I liked the case and didn't want to buy a new PC. So I got an ASRock Z97M Pro4...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:02.
Find Us