IRQL_NOT_LESS_OR_EQUAL Overclocked PC

I had a couple of WHEA_UNCORRECTABLE_ERROR bsod while i was setting up the oc then i lowered the multi and the bsod stopped, so i tough my pc was stable. But today i had the one stated in the title so i changed everything back to stock and seems to be running ok.

These were my settings while OCing:
i7 2600k@4.4ghz
Vcore 1.264-1.280 (Offset OC)
VRM Freq: 350
LLC: Medium (The other ones lowered my idle Vcore to below 0.900.

Gskill Ripjaws 8GB (x2 2x2)@ 1866CL9 1.5v (XMP value at 1600CL7 1.5v)

GTX 960 MSI Gaming
+30Mv
+130 Core
+250 Mem
105% Power Limit

Ztruker said:

If you want us to look at your problem, please read and followthe instructions here: Blue Screen of Death (BSOD) Posting Instructions

SOunds like over clocking is cauysing a problem for sure. Maybe the dumps or other info can help ID the cause.

Could you tell me whats wrong with the post? Iv read the rules before posting and the dump file is already attached.

The Nvidia graphics driver (nvlddmkm.sys) is listed as the faulting module in the minidump you posted. You should go back to default settings regarding the GPU overclock, and then update your graphics driver to the latest version.

Several of the files in your .zip are either missing or appear to be corrupted - msinfo.nfo for example. Try and run the log collector again.

msinfo32.exe just wont finish the test, gets stuck at 13%/14% CPU utilization and 123+ MB Ram. I waited over 10 mins to finish, had to kill task or the collector wont finish.

Ill attach the dump anyway but tell me if theres another way i can provide files

I will update the drives meanwhile

Uninstalled synapse since i dont really use it and updated steelseries engine 3, since i removed the oc on the gpu i didint got any new bsod.

is it normal that the dmp collector gets stuck at msinfo? I had to kill msinfo32 again after it ended or the dmp wouldnt finish.

Ztruker said:

No, not usual at all. I did a search for msinfo32 hangs and got all kinds of different reasons for it happening.

Try running these commands, in order, from a Elevated Command Prompt:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth
SFC /scannow

If any errors, run that command agaibn, up to 3 times.

Run everything without errors, restarted but still hangs. I tried to manually save but it does the same, after its done checking everything it just hangs.

Is there any service related to msinfo32? I disabled some services after i installed Windows 10, i might went overboard and disabled something usefull.