Please run this log collector and post a zip into the thread:
log collector v2-beta06.zip
The logs are in a foreign language so it limits the troubleshooting.
Please translate each of these:
ÎÞ·¨´Ó¸ÃÍêÕûת´¢ÎļþÉú³ÉÒ»¸öСÐÍת´¢Îļþ¡£
¹ÊÕÏת´¢³õʼ»¯Î´³É¹¦
Windows ÎÞ·¨¿ìËÙÆô¶¯£¬´íÎó״̬Ϊ 0xC00000D4¡£
´«ºôÆÚ¼äÔÚÉ豸 \Device\Harddisk2\DR2 Éϼì²âµ½Ò»¸ö´íÎó¡£
Are the computer files backed up?
Has a backup image been made?
Are you able to perform a clean install and use English as the default language so that the computer can be troubleshooted? Clean install is likely to fix misbehaving software and hardware drivers. It would then be easier to see if there are any hardware problems with logs that can be scanned and read.
1) Open administrative command prompt and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /restorehealth
4) chkdsk /scan
5) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
6) Turn off windows fast startup:
Turn On or Off Fast Startup in Windows 10 Performance Maintenance Tutorials
7) How To Fill Out Your System Specs
How To Fill Out Your System Specs
System Specs - Fill in at Ten Forums:
System Specs - Fill in at Ten Forums Site Use Tutorials
In the left corner below in your post you find 'My System Specs'.
After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
System Info - See Your System Specs - Windows 7 Help Forums
Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, etc.)
8) Run HDTune:
http://www.hdtune.com/
to check the health,
scan for errors, no quick scan but full scan
run a benchmark.
It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following
the health,
the error scan,
the benchmark incl. following
transfer rate,
access time,
burst rate,
cpu usage.
Take Screenshot in Windows 10 General Tips Tutorials
8) Run memtest86+ version 5.01 for at least 8 passes.
Memtest86+ - Advanced Memory Diagnostic Tool
This may take hours so plan to run it overnight.
Please make sure you use the Memtest86+ version 5.01 with the link below.
Memtest86+ - Advanced Memory Diagnostic Tool
The testing is done not by time but by passes.
The more passes the better.
There are a significant number of false negatives if fewer than 8 passes are made.
A false negative is a test pass when there is malfunctioning RAM.
There is 16 GB of RAM on the computer.
Memtest86+ version 5.01 testing takes approximately 1 - 2 hours /GB RAM
Just 1 error is a fail and you can abort testing.
Then test 1 RAM module at a time in the same DIMM each for 8 or more passes.
When Memtest86+ has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.
Memory problems. - Microsoft Community
MemTest86+ - Test RAM BSOD Tutorials