There is no response from something on a request from the CPU what results in a too much time-out between data error.
Unfortunately, you won't get much more details from a 0x124.
There are many things one can do, below is a list of suggestions and tests, it is a lot but take the time to do it properly
Please make sure
- the cables are properly connected,
- the PSU is properly connected and no looe cable in the PSU,
- no cable is broken
- the components are properly seated and the connection isn't damaged.
- no connection is broken, check the pins.
The error 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.
STOP 0x124 Troubleshooting
Read carefully before proceeding.
Warning
If you're overclocking your system, revert back to stock clocks now.
Note
Test the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums
Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for
at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for
zero errors here. Even a single error will indicate RAM failure.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Note
Do not run SeaTools on an SSD as the results will be invalid.
Run chkdsk
Disk Check - Windows 7 Help Forums
Run HDTune to
- scan for errors, no quick scan but full scan
- check the health,
- benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums
Note
Run Furmark for around 30 minutes.
Warning
Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Please fill in your system specsPlease follow
this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling system and other used stuff.
How to fill in your system specs:
Code:
6: kd> !errrec ffffe001f4f60028
===============================================================================
Common Platform Error Record @ ffffe001f4f60028
-------------------------------------------------------------------------------
Record Id : 01d12fd18f993d24
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 12/6/2015 2:59:38 (UTC)
Flags : 0x00000000
===============================================================================
Section 0 : Processor Generic
-------------------------------------------------------------------------------
Descriptor @ ffffe001f4f600a8
Section @ ffffe001f4f60180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal
Proc. Type : x86/x64
Instr. Set : x64
Error Type : BUS error
Operation : Generic
Flags : 0x00
Level : 3
CPU Version : 0x0000000000600f20
Processor ID : 0x0000000000000006
===============================================================================
Section 1 : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor @ ffffe001f4f600f0
Section @ ffffe001f4f60240
Offset : 536
Length : 128
Flags : 0x00000000
Severity : Fatal
Local APIC Id : 0x0000000000000006
CPU Id : 20 0f 60 00 00 08 08 06 - 0b 32 98 3e ff fb 8b 17
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
Proc. Info 0 @ ffffe001f4f60240
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ ffffe001f4f60138
Section @ ffffe001f4f602c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 6 Bank 0)
Status : 0xb880000000020f0f
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.
- Uninstall Daemon Tools
- Download the SPTD standalone installer and follow these steps:
- Double click the executable to open it
- Click on the button shown below
If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.