Windows 10: Win 10 RS-4 not compatible with Intel DX58SO motherboard

Page 16 of 24 FirstFirst ... 61415161718 ... LastLast

  1. Posts : 1,919
    Windows 10 x86 14383 Insider Pro and Core 10240
       18 Dec 2017 #151

    Just a question, Bordi - what browser are you using?

    No screenshots!

    The ISO folder location is irrelevant as long as it is consistent during the process. I had to change it from C: to J: when I posted earlier. If DISM loaded the WIM from an ISO on the D: drive, It expects the wim file to go back to the same place.
      My ComputersSystem Spec

  2.    18 Dec 2017 #152

    I use Firefox and internet explorer but 99% of the time I use Firefox now
      My ComputerSystem Spec


  3. Posts : 1,919
    Windows 10 x86 14383 Insider Pro and Core 10240
       18 Dec 2017 #153

    Just that chrome allows you to press prnt scr like this and then ctrl+v Click image for larger version. 

Name:	image.png 
Views:	2 
Size:	143.4 KB 
ID:	168738and the screen is captured and posted to this reply box - just saying.
      My ComputersSystem Spec

  4.    18 Dec 2017 #154

    OK mate thanks I’ll give it a go tomorrow, see how I get on
      My ComputerSystem Spec


  5. Posts : 1,919
    Windows 10 x86 14383 Insider Pro and Core 10240
       18 Dec 2017 #155

    Yeah, I'm going to take a break too.
      My ComputersSystem Spec


  6. Posts : 1,919
    Windows 10 x86 14383 Insider Pro and Core 10240
       18 Dec 2017 #156

    I have come across a few reports of DISM failing to handle wim mounts as it should, it seems sometimes to be a 64-bit Windows phenomenon. There are 2 DISM.Exe programs from Windows\System32 and from Windows\SysWOW64 in 64-bit Windows system. It appears that the "wrong" version cannot pick up after the right version has started a process, but the single copy 32-bit version has problems too. :

    Hi all,

    had same problem unmounting the wim file using Windows 7 Pro 32bit.

    My solution was: Checking for "wrong" Dism.exe


    Preparing a WinPE I followed the steps in the help of AIK. I ran the
    copype.cmd batch. When it was finished, it said that it added something
    to the path environment variable. It was clear that it did so in order
    to find the tools needed for the further steps. As long as everything
    worked, I didn't give it a second thought. Then I could not unmount the
    WIM.

    I looked at the PATH variable: NO entry pointed to the directory where
    dism.exe was in. (In my case that would have been
    c:\program files\windows aik\tools\x86\servicing
    )

    Magically, dism.exe started from everywhere though.

    Doing a dir c:\dism.exe /s /a showed I had a Dism.exe in
    c:\windows\system32, as well. This one has a file size different from
    the correct one. Obviously I had started this one (because PATH points
    there).

    Starting the correct dism.exe let me unmount the WIM without problems.

    from:
    dism - The directory could not be completely unmounted - process explorer cant find open processes and unmounting fails
      My ComputersSystem Spec

  7.    19 Dec 2017 #157

    Not sure if I should have started fresh this morning or carry on from where we stopped yesterday

    I don’t know if it was the commands you asked me to perform yesterday or the fact that explorer was closed (as Jason says was the cause on the link you gave)

    Jason said:
    It appears in my case that UAC was holding the folder open after i copied some files in the mounted dir. Once i closed the explorer windows, i was able to unmount without an issue on server 2008 R2 x64
    Jason
    But this morning I returned to the rest of the commands (where we left off) and its seems fine

    Not sure
    Attached Thumbnails Attached Thumbnails done I think.jpg  
      My ComputerSystem Spec


  8. Posts : 1,919
    Windows 10 x86 14383 Insider Pro and Core 10240
       19 Dec 2017 #158

    Dism not unmounting, seems to be due to having more than one version of Dism on the system - invariably in 64-bit systems, sometimes also can happen in 32-bit with ADK etc. DISM is platform independent - 64-bit Dism can service 32-bit windows and vice versa.

    If not specified in the commandline e. g. c:\windows\system32\dism.exe /etc.,but just dism, it may be the 64-bit version in c:\windows\syswow64\dism.exe that actually runs the command, and is involved in an open session with a mounted wim, so when a command to unmount a wim is made, the unoccupied 32-bit version tries to do it and fails, because the other Dism.exe has the mount open. Odd.

    But most likely, an explorer window may be the culprit - but it shouldn't hold a file open unless some metadata from the file or folder is in use, such as the properties sheet.

    Back to you - it looks like you have successfully added drivers to the image#8 (Pro) in the Install.wim, and unmounted cleanly.

    Have you also managed to cleanly unmount the boot.wim image after adding the drivers?

    Note that in the run through I did yesterday, I checked the properties of each Wim file before and after adding the drivers to see if the size of the wim had increased.

    If so you are ready to go! You could add the contents of C:\ISO to make a bootable USB, as I am sure you have done before, and give it a go at installing.

    Of course, there are no guarantees so far, but good luck!
      My ComputersSystem Spec

  9.    19 Dec 2017 #159

    Tried setup from C:\iso file and still froze on windows logo on reboot

    Copied the C:\iso contents on to a USB and rebooted, install from USB, froze on windows logo

    Going to wipe the hard-disk, re-install 16299 and go through the whole procedure again just to try one last time.

    Making a note here for quick reference

    ----------------------------------------------------------

    Create three new files on C:\drive

    C:\drivers

    C:\iso

    C:\mount

    Copy the contents of a mounted ISO of Windows 17025 onto C:\iso

    Open an elevated command prompt

    Export-WindowsDriver -Online -Destination C:\drivers

    dism /mount-wim /wimfile:c:\iso\sources\boot.wim /index:2 /mountdir:c:\mount

    dism /image:c:\mount /add-driver /Driver:c:\drivers /recurse

    dism /unmount-wim /mountdir:c:\mount /commit

    dism /Get-WimInfo /WimFile:c:\iso\sources\install.wim

    dism /mount-wim /wimfile:c:\iso\sources\install.wim /index:8 /mountdir:c:\mount

    dism /image:c:\mount /add-driver /Driver:c:\drivers /recurse

    dism /unmount-wim /mountdir:c:\mount /commit

    ----------------------------------------------------------------

    And if that doesn’t work again then I’ll wait till Boxing Day sales and try to get a new motherboard, CPU and ram.
      My ComputerSystem Spec


  10. Posts : 1,919
    Windows 10 x86 14383 Insider Pro and Core 10240
       19 Dec 2017 #160

    Create three new files on C:\drive

    C:\drivers

    C:\iso

    C:\mount

    Copy the contents of a mounted ISO of Windows 17025 onto C:\iso

    Open elevated powershell

    Export-WindowsDriver -Online -Destination C:\drivers


    Open an elevated command prompt

    dism /mount-wim /wimfile:c:\iso\sources\boot.wim /index:2 /mountdir:c:\mount

    dism /image:c:\mount /add-driver /Driver:c:\drivers /recurse

    dism /unmount-wim /mountdir:c:\mount /commit

    dism /Get-WimInfo /WimFile:c:\iso\sources\install.wim
    not needed since we know 8 is the correct image
    dism /mount-wim /wimfile:c:\iso\sources\install.wim /index:8 /mountdir:c:\mount

    dism /image:c:\mount /add-driver /Driver:c:\drivers /recurse

    dism /unmount-wim /mountdir:c:\mount /commit


      My ComputersSystem Spec


 
Page 16 of 24 FirstFirst ... 61415161718 ... LastLast

Related Threads
Read more: Intel: We're ending all legacy BIOS support by 2020 | ZDNet See also: http://www.uefi.org/sites/default/files/resources/Brian_Richardson_Intel_Final.pdf
I spoke to Microsoft after they re-installed latest windows 10. There were some buggy issues after the update, e.g couldnt click windows icon at bottom left corner, black screen with white mouse on loading my account from startup (this happend...
Solved Intel Motherboard Powerup in Drivers and Hardware
Just bought a used Intel DQ57TM motherboard with i5-650 CPU. As I am going away on hols tomorrow, I quickly connected it up to a good power supply plus internal speaker, resting the mobo on an insulated surface. No other connections were made. ...
Intel DX58SO MB & Win 10 in Installation and Upgrade
Has anyone upgraded their Intel DX58SO system to Win 10? If so, are there any issues? Intel hasn't, and likely won't, update the 5 Series drivers for the new OS. The latest available on the Intel Download Center are Win 7 drivers. I'm...
Solved Intel DX58SO compatibility with XEON in PC Custom Builds and Overclocking
I'd like to ask if someone has a XEON running on that mobo. I would like to buy one and would like to make sure that it runs on this mobo. I'm using the latest BIOS, SOX5810J.86.5600 dated 07/29/2013. Thanks for all advice in advance!
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:00.
Find Us