Windows 10: Slow Data copy/paste SPEEDS in WINDOWS 10 Solved

  1.    19 Nov 2016 #1

    Slow Data copy/paste SPEEDS in WINDOWS 10


    Hello Guyz, I encountered a problem after upgrading to windows 10. I had extremely slow data transfer speed from any storage media. I myself found a fix for it. I didn't have this prob in win 7. I hope that u understand.

    Regards
    Robert Stark

    Follow the steps below As Attached

    Click image for larger version. 

Name:	Screenshot (15).png 
Views:	36 
Size:	1.08 MB 
ID:	110585Click image for larger version. 

Name:	Screenshot (16).png 
Views:	74 
Size:	152.0 KB 
ID:	110586Click image for larger version. 

Name:	Screenshot (17).png 
Views:	47 
Size:	156.7 KB 
ID:	110589Click image for larger version. 

Name:	Screenshot (18).png 
Views:	68 
Size:	174.5 KB 
ID:	110588Click image for larger version. 

Name:	Screenshot (19).png 
Views:	51 
Size:	171.8 KB 
ID:	110587Click image for larger version. 

Name:	Screenshot (20).png 
Views:	43 
Size:	168.6 KB 
ID:	110590Click image for larger version. 

Name:	Screenshot (21).png 
Views:	36 
Size:	172.7 KB 
ID:	110591Click image for larger version. 

Name:	Screenshot (22).png 
Views:	37 
Size:	172.8 KB 
ID:	110592
      My ComputerSystem Spec

  2.    19 Nov 2016 #2

    Thank you so much I'm going to check and see how it works out.
      My ComputerSystem Spec

  3.    19 Nov 2016 #3

    It will work
      My ComputerSystem Spec

  4.    19 Nov 2016 #4

    Hello Mohammedrocks,
    I just copied a 5 GB and it transported at speeds of 90 Mb/s
    Before the change Maximum speed was 30 Mb/S
    Now it works properly.
    Thank you
      My ComputerSystem Spec


  5. Posts : 5
    Windows 10 Pro x64 Build 14393
       21 Nov 2016 #5

    Worked for me! Good find
      My ComputerSystem Spec

  6.    21 Nov 2016 #6

    Hi,

    Running defragmentation constantly for all drives ?
    Surely that's going to reduce life expectancy for those devices.
    Or, will the service stop running after a while ?

    Cheers,
      My ComputerSystem Spec

  7.    21 Nov 2016 #7

    I have also worried about it. But I did check it. If also it is set to run at system startup, the service does not do anything. It will only start to run after a data transfer occurs between drives. As you know, whenever windows finds a drive as completely defragmented, it stops doing so and only scans in idle bandwidth allocation. It won't cause any damage since it is not running defragmentation constantly. It only helps the system to clean bad sectors.
    fdegrove said: View Post
    Hi,

    Running defragmentation constantly for all drives ?
    Surely that's going to reduce life expectancy for those devices.
    Or, will the service stop running after a while ?

    Cheers,
      My ComputerSystem Spec

  8.    21 Nov 2016 #8

    Hi,

    I can see how it may help on a heavily fragmented HDD but on a SSD I very much doubt it.

    It only helps the system to clean bad sectors.
    No, that's not what that service does.

    Cheers,
      My ComputerSystem Spec

  9.    22 Nov 2016 #9

    fdegrove said: View Post
    Hi,

    I can see how it may help on a heavily fragmented HDD but on a SSD I very much doubt it.



    No, that's not what that service does.

    Cheers,
    I hope you get the point. The service doesnt do what i told. Actually I was speaking of defragmentation commonly. People need fix for their prob. Im sure it wont harm anything.
    Cheers
      My ComputerSystem Spec

  10.    18 Jan 2017 #10

    So it's not recommended with SSD, right?
      My ComputerSystem Spec


 

Related Threads
ok folks.......i am begging someone on here to help me - on the verge of going back to windows 7. Tried everything. help me. please. i have an x99 chipset pc, i7 5820k, 16gb ram, gtx nvidia 970 - its a good pc (meant to be anyway............)....
Hello everyone, I decided to open this thread about a subject which has been discussed widely in different forums on the net, namely the extremely low transfer rates of data between PCs running Windows using a gigabit network, because I think to...
I have a WD 2T HD 7200 RPM. Plugged in as a USB drive, the transfers speed is 7mg/sec, but if I use it as an internal SATA it's about 190mg/sec. I've tried 3 different USB interfaces with the 2T drive with the same results. Other USB HD's...
I have a WD 2T HD 7200 RPM. Plugged in as a USB drive, the transfers speed is 7mg/sec, but if I use it as an internal SATA it's about 190mg/sec. I've tried 3 different USB interfaces with the 2T drive with the same results. Other USB HD's that...
I'm wondering if there's any way I can increase the data transfer speed between 2 of my computers on my wireless network. I'm seeing about 1.25MB/s according to the box that shows you the speed/duration of a file transfer. I'd love to even triple...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:28.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums