Cannot get new pc to post

Finished a pc build today. Same one here > rx 580 4gb 8gb ram - LukeDaDuke2017s Saved Part List - Ryzen 5 1600 3.2GHz 6-Core, Galaxy-02 ATX Mid Tower - PCPartPicker except using a gtx 750 as the 580 has not come in yet. Everything put together, everything connected. Hit the power button, everything starts spinning, all lights go on, but no output to monitor and keyboard and mouse wont turn on. Gets stuck in a boot cycle of 10 secons, turns off, then back on. I am trying to do a clean install of windows, but cannot get into bios. Heck, I cant even get video output. Any help would be appreciated

Do you get/hear the post beep? If it's not posting then it's a hardware issue. Recheck all your hardware and cable connections.

No beeps

Remove the video card. Plug the monitor into the onboard graphics on the motherboard.

Also, you should be using two ram sticks instead of just one to get dual channel RAM access. Also, it looks like a single RAM stick will go in slot A2 - make sure that is where your RAM is installed. From the slot closest to the CPU, the RAM slots are A1, A2, B1, B2.

Motherboard/cpu dont have integrated gralhics, second only have 1 ram stick, third where is slot a2

LukeDaDuke said:

Motherboard/cpu dont have integrated gralhics, second only have 1 ram stick, third where is slot a2

A2 is second one from the CPU.

Also mobo doesnt have graphics..?

Hi,
This does show on board graphic's

But the cpu does not have an igpu

Hi,
Well not sure but it shows a dvi and vga so unless you have a different board post to it
Take a picture of the ports you do have
ASRock > AB350M Pro4