New
#271
Ok finally got it figured out. Bottom line, just needed to increase the voltage a little more. Now all the tests run fine on PerformanceTest 9.0
Can't go lower thou.....don't know for sure IF I put the right amount in my spec's thou, as I have changed it so many times in the past month. That's why I posted that pic....which I just took. My temps stay pretty cool almost all the time thou.
I'll take a screen shot of it in my bios....Running is Adaptive mode also.
1.488 looks like. Mie is set to 1.45 but never touches it, it peaks at 1.449, and I can go as far as 1.52 on the board, although I never had too. The 1.45 also let me run 5.18986 MHz(soooooo close!) using 1 core @ 1 thread using 52x 99.8 MHz(had to drop base clock from default 100 because I was getting a horrifying BSOD loop, that I could only escape by clearing the CMOS, which put me back to my BIOS versions default settings, so couldn't make the 5.2).