New
#11
Hey TV2,
You should start a new thread for your post #5 :)
Hey TV2,
You should start a new thread for your post #5 :)
Hey wortex,
Post the results of you ipconfig /all
Seems like you've got a lot going on with that PC. I would go back to the basic, just for a sanity check :)
Do the following, if you haven't done so recently (They can take awhile :) )
Open Command Prompt as Admin
sfc /scannow
Dism /Online /Cleanup-Image /RestoreHealth
==================================================
If the Firewall is turned off it shouldn't be blocking anything.If the firewall is inactive is this ports still blocked/open?
I'm guessing your NOT running any 3rd party firewall ?
DHCP Client - running (Startup Type - Automatic)What do i need to check on HT-PC to solve the problem? Which services need to running and which settings in regedit needs to be fullfilled?
DNS Client - running (Startup Type - Automatic / Trigger Start)
Function Discovery Resource Publication - runnning (Startup Type - Automatic / Delayed Start)
Network Connections - running (Startup Type - Manual)
Network Location Awareness - running (Startup Type - Automatic)
Remote Procedure Call (RPC) - running (Startup Type - Automatic)
Server - running (Startup Type - Automatic)
TCP/IP Netbios helper - running (Startup Type - Manual / Trigger Start)
Workstation - running (Startup Type - Automatic)
UPnP Device Host - running (Startup Type - Manual)
You can try and reset the tcp/ipStill get NetBIOS over tcpip disabled from Ipconfig /all.
NetBIOS over tcpip is enabled in properties and also in regedit in ...NetBT\Parameters\Interfaces\Tcpip {1707....} NetbiosOption = 1. I have verified correct interface by change NetBIOS Setting in WINS.
Open Command Prompt as Admin
netsh int ip reset c:\resetlog.txt
Hi Eagle51
I have done all cleanup and also the tcpip reset. Still sharing problem after restart
All firewalls are disabled and the services are configured as your list
On my HT-PC, all computers are now listed in Network list and i can se all 4 shared HT-PC folders. but when I click on one of my shared HT-PC folders under Network I get this error message during network diagnostic.
Problem found
The remote device or resource won´t accept the connection
"The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".
Do you know why?
Hey wortex,
Lets check SMB ...
1. Control Panel > Programs and Features > Turn Windows Features On or Off and make sure SMB 1.0/CIFS File Sharing Support is enable/checked.
2. Open PowserShell as Administrator run the following command and paste results
Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol
Hi Eagle51 & thanks for quick response
I am very grateful for your help
1 was not enabled. I enabled it and restarted the HT-PC, but now the HT-PC is not visible in Network list on any computer.
...then i run 2 and both was true.
Next step?
Hi again
After a couple restarts on the HT-PC it shows up in the Network list but still same problem and error message
Problem found
The remote device or resource won´t accept the connection
"The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".
And same info with ipconfig
Hi again
One step closer
Now is it possible to open HT-PC shared folders in Networklist on the HT-PC.
The HT-PC is visible on the other computer but not accessible
I got same error message on other computer in network when trying to access shared HT-PC folders
Problem found
The remote device or resource won´t accept the connection
"The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".
Have you done my post #15 on the other computer to see what it says ?
Hi
Yes on my laptop.
1 OK
2 Nothing on SMB1 and True on SMB2
The laptop can access my son Eddies computer. My HT-PC can access my laptop and Eddies computer