My PC is not listed in Network

Page 2 of 3 FirstFirst 123 LastLast
  1.    #11

    Hey TV2,
    You should start a new thread for your post #5 :)
      My ComputersSystem Spec

  2.    #12

    Hey wortex,
    Post the results of you ipconfig /all

    Seems like you've got a lot going on with that PC. I would go back to the basic, just for a sanity check :)
    Do the following, if you haven't done so recently (They can take awhile :) )
    Open Command Prompt as Admin
    sfc /scannow
    Dism /Online /Cleanup-Image /RestoreHealth

    ==================================================

    If the firewall is inactive is this ports still blocked/open?
    If the Firewall is turned off it shouldn't be blocking anything.
    I'm guessing your NOT running any 3rd party firewall ?

    What do i need to check on HT-PC to solve the problem? Which services need to running and which settings in regedit needs to be fullfilled?
    DHCP Client - running (Startup Type - Automatic)
    DNS Client - running (Startup Type - Automatic / Trigger Start)
    Function Discovery Resource Publication - runnning (Startup Type - Automatic / Delayed Start)
    Network Connections - running (Startup Type - Manual)
    Network Location Awareness - running (Startup Type - Automatic)
    Remote Procedure Call (RPC) - running (Startup Type - Automatic)
    Server - running (Startup Type - Automatic)
    TCP/IP Netbios helper - running (Startup Type - Manual / Trigger Start)
    Workstation - running (Startup Type - Automatic)
    UPnP Device Host - running (Startup Type - Manual)


    Still get NetBIOS over tcpip disabled from Ipconfig /all.
    NetBIOS over tcpip is enabled in properties and also in regedit in ...NetBT\Parameters\Interfaces\Tcpip {1707....} NetbiosOption = 1. I have verified correct interface by change NetBIOS Setting in WINS.
    You can try and reset the tcp/ip
    Open Command Prompt as Admin
    netsh int ip reset c:\resetlog.txt
      My ComputersSystem Spec

  3.    #13

    Hi

    Ipconfig for the devide i use.
    Click image for larger version. 

Name:	Ipconfig.JPG 
Views:	17 
Size:	44.4 KB 
ID:	145501
      My ComputerSystem Spec

  4.    #14

    Hi Eagle51

    I have done all cleanup and also the tcpip reset. Still sharing problem after restart
    All firewalls are disabled and the services are configured as your list

    On my HT-PC, all computers are now listed in Network list and i can se all 4 shared HT-PC folders. but when I click on one of my shared HT-PC folders under Network I get this error message during network diagnostic.

    Problem found
    The remote device or resource won´t accept the connection

    "The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".

    Do you know why?
      My ComputerSystem Spec

  5.    #15

    Hey wortex,
    Lets check SMB ...
    1. Control Panel > Programs and Features > Turn Windows Features On or Off and make sure SMB 1.0/CIFS File Sharing Support is enable/checked.

    2. Open PowserShell as Administrator run the following command and paste results
    Get-SmbServerConfiguration | Select EnableSMB1Protocol, EnableSMB2Protocol
      My ComputersSystem Spec

  6.    #16

    Hi Eagle51 & thanks for quick response

    I am very grateful for your help

    1 was not enabled. I enabled it and restarted the HT-PC, but now the HT-PC is not visible in Network list on any computer.

    ...then i run 2 and both was true.

    Next step?
      My ComputerSystem Spec


  7.    #17

    Hi again

    After a couple restarts on the HT-PC it shows up in the Network list but still same problem and error message

    Problem found
    The remote device or resource won´t accept the connection

    "The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".

    And same info with ipconfig
      My ComputerSystem Spec

  8.    #18

    Hi again

    One step closer

    Now is it possible to open HT-PC shared folders in Networklist on the HT-PC.
    The HT-PC is visible on the other computer but not accessible

    I got same error message on other computer in network when trying to access shared HT-PC folders

    Problem found
    The remote device or resource won´t accept the connection

    "The divice or resource (HT-PC) is not set up to accept connections om port "The File and printer sharing (SMB)".
      My ComputerSystem Spec

  9.    #19

    Have you done my post #15 on the other computer to see what it says ?
      My ComputersSystem Spec

  10.    #20

    Hi

    Yes on my laptop.
    1 OK
    2 Nothing on SMB1 and True on SMB2

    The laptop can access my son Eddies computer. My HT-PC can access my laptop and Eddies computer
      My ComputerSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast

Related Threads
I have a Dell Inspiron M731R laptop upgraded from Windows 8.1 to Windows 10 Home 64-Bit that suddenly quit connecting to the home network. Was using wireless, so switched to an Ethernet cable, but still no luck. I just discovered that ALL of the...
No Home Wifi Listed in Network and Sharing
I'm facing a problem regarding my home wifi..it's not listed on my wifi section..but when someone make a wifi hotspot through mobile data, it pick it up and listed..but not my home wifi..my computer acer aspire 4715z with broadcom 802.11g driver...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:19.
Find Us