Can't repair my installation

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 34,992
    Win 10 Pro (1903) (2nd PC is 21H2)
       #11

    Hi, if it's not going to be a huge problem, the quickest solution now will be to reinstall.
    If you added the SSD later, make sure your BIOS is set to use AHCI for best SSD performance before installing.



    Translation:
    Microsoft Windows [version 10.0.14393] (c) 2016 Microsoft Corporation. All rights reserved.
    C: \ WINDOWS \ system32> DISM / online / get-intl
    Deployment Image Management and Maintenance Tool Version: 10.0.14393.0
    Error: 87 The online / get-intl option is unknown.
    Help running DISM.exe /. The DISM log file can be located in DISM / online / get-intl C: \ WINDOWS \ Logs \ DISM \ dism.log

    C: \ WINDOWS \ system32 ImplementationVersion: 10.0.14393.0
    Version of the Image: 10.0.14393.0

    Informing international settings online.
    Language default system interface: pt-BRO fallback of user interface language is: en-US Location of system: en -USB standard time zone: E. South America Standard Time Active Keyword (s): 0416: 00010416, 0416: 00000416 Layered Keyboard Driver: PC / AT Enhanced Keyboard (101/102 keys)

    Installed Languages: en Type: partially translated language, type MUI. Fallback languages ​​en-US operation completed successfully.
    C: \ WINDOWS \ system32>
      My Computers


  2. Posts : 42
    win 10
    Thread Starter
       #12

    jaca said:
    I've tried all the steps. It's all right. A month ago I made the image of win10, installed a ssd and installed win10 on this new hd.It worked perfectly, until about 10 days ago, when these described phenomena began.I think of doing a new, clean reinstallation.In my old hd, 1T, I have installed the programs I use, all of them.
    Since the system worked fine and suddenly started causing problems, I think one option is that this was caused by some update.Is there a way to uninstall any of them, or can you only get those that Microsoft "allows"?
      My Computer


  3. Posts : 34,992
    Win 10 Pro (1903) (2nd PC is 21H2)
       #13

    Please post a screenshot of Disk Management, and advise if your PC is UEFI enabled or not.

    You can uninstall updates if you wish. However, I don't think it will have been an update that caused this.
    Can't repair my installation-snap-2017-04-15-19.28.35.jpg
      My Computers


  4. Posts : 42
    win 10
    Thread Starter
       #14

    I can'nt say if I have UEFI: in System Info, says BIOS inherited Prior to remove any update, I'm sending the screenshot
    Can't repair my installation-capturar.jpg
      My Computer


  5. Posts : 34,992
    Win 10 Pro (1903) (2nd PC is 21H2)
       #15

    Hi, there's a problem there.

    I will show you the typical partition structure for two different configurations.

    Can't repair my installation-snap-2017-04-15-21.15.07.jpg
    1. BIOS/MBR-based hard drive partitions

    Can't repair my installation-snap-2017-04-15-21.17.31.jpg
    2. UEFI/GPT-based hard drive partitions

    You should research your MBR/BIOS of the motherboard you bought and find out if you have legacy BOS only, or UEFI as well.

    Of the above configurations, as viewed by Disk Management, the System partition (16Mb) is not shown.
    You are lacking a recovery partition. That's about 450 -500Mb.

    So, however you created your current installation, it seems it wasn't a normal Windows installation.

    Can't repair my installation-snap-2017-04-15-21.23.25.jpg
    Here's my UEFI partition set as viewed by Easeus Partition Manager.
      My Computers


  6. Posts : 42
    win 10
    Thread Starter
       #16

    My copy of win10 was not got from MS directly, but thru the educational institution.Will it be the cause??
    Last edited by jaca; 15 Apr 2017 at 16:32.
      My Computer


  7. Posts : 42
    win 10
    Thread Starter
       #17

    I think I know who is the guilty: ME! When I made the image (with Macrium) I must have made an incomplete copy, which later was restored on the SSD.
      My Computer


  8. Posts : 34,992
    Win 10 Pro (1903) (2nd PC is 21H2)
       #18

    Sounds about right.
    Now, if you originally had a HDD and you swapped to a SSD, at that point you need to have ensured you had AHCI enabled in your BIOS for best performance. There are tutorials for that procedure.

    Macrium has an option for Windows Backup, which backs up by default all partitions associated with the OS.

    You could follow this approximate process:
    1. Create a disk image of your 'C:' partition
    2. Wipe your SSD and make sure AHCI is enabled
    3. Reinstall Windows and make sure the partition size for 'C:' is big enough for your existing 'C:'
    4. Restore your disk image in place of the new Windows partition.
    5. Run startup repair.
      My Computers


  9. Posts : 42
    win 10
    Thread Starter
       #19

    Now that we know who's the #1 Public Enemy, I'll do that job. I'll contact later.
      My Computer


  10. Posts : 42
    win 10
    Thread Starter
       #20

    One more question: is it notoriously important have image done for C: and E: (see mydisk management, please), is not? Or not?
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:06.
Find Us




Windows 10 Forums