New
#1
Computer Will Not Boot After Windows 10 Installation
Hello,
I’m having trouble with my Windows 10 clean install. Once it installs it says it is resetting to complete installation, after it resets it will not load to the windows screen. It just loads bios and hangs with a prompt flashing on a black screen. I then used DISKPART to clean the disks and tried a new install in MBR and again in GPT formats, still the same result. What am I doing wrong? Are the RAID drives causing the problem? The machine was running fine before. I had a free upgrade from 7 and did the process of upgrading to 10 first before the clean install to activate the product. That went fine. I ran the hardware diagnostics from the BIOS and it failed the boot test with error code BIOHD3. Warning: No active partitions.
The machine is a HP with a
•HP: Cleveland-GL8 Motherboard
•Intel H67 Chipset
• Intel i7-2600
• 9GB DDR3-1333MHz SDRAM [3 DIMMs]
• 1TB RAID 0 (2 x 500GB SATA HDDs)
• 1GB DDR3 AMD Radeon HD 6570