Windows 10: Computer Will Not Boot After Windows 10 Installation

  1. Posts : 1
    Windows 10 Home
       03 Sep 2015 #1

    Computer Will Not Boot After Windows 10 Installation


    Im having trouble with my Windows 10 clean install. Once it installs it says it is resetting to complete installation, after it resets it will not load to the windows screen. It just loads bios and hangs with a prompt flashing on a black screen. I then used DISKPART to clean the disks and tried a new install in MBR and again in GPT formats, still the same result. What am I doing wrong? Are the RAID drives causing the problem? The machine was running fine before. I had a free upgrade from 7 and did the process of upgrading to 10 first before the clean install to activate the product. That went fine. I ran the hardware diagnostics from the BIOS and it failed the boot test with error code BIOHD3. Warning: No active partitions.

    The machine is a HP with a

    HP: Cleveland-GL8 Motherboard
    Intel H67 Chipset
    Intel i7-2600
    9GB DDR3-1333MHz SDRAM [3 DIMMs]
    1TB RAID 0 (2 x 500GB SATA HDDs)
    1GB DDR3 AMD Radeon HD 6570
      My ComputerSystem Spec

  2.    03 Sep 2015 #2

    I don't have a solution, but some thoughts on the problem:

    - Windows 10 must have been activated at least once after the upgrade. If that has been the case, it's fine. If not, your Windows 10 will not activate.
    - RAID 0 basically only is an array of two independant discs. I don't know in how far that can cause problems.
    - The information that you are missing an active partition matches what you say you see on bootup: Nothing happens as no drive is used.

    I am no experts in fixing such bootup problems, but I would now check, if it helped to mark one of the primary partitions as active. If so, I would try doing that with the right partition and see, if it helps.
      My ComputerSystem Spec


Related Threads
In the first week or so, Windows performed quite smoothly (albeit with some slowdown playing games) and was for the most part perfect. However, quite recently my experience with Windows 10 has been so poor that I am regularly unable to even boot...
Solved Win 10 Installation - Immediate Re-Boot in Installation and Upgrade
Hi all, I am running Windows 7 Ultimate, 64-bit (hoping to "upgrade" to Windows 10 Pro). In my Windows 10 Installation attempt, I am presented with the window shown in the attachment and I select the "Start the upgrade now" button. My...
Hi all. I have had nothing but issues, since upgrading to Windows 10 from Windows 8 (64). The installation within of itself was horrible. I got the continual flash on the screen, until I was able to get it into safe mode and recovered it. Then...
I decided to install Windows 10 on an old computer in my basement (at least 15 years old) in order to see how it would perform. It already had Windows XP Pro installed. This was my plan: 1. Install Windows 10 Pro 32-bit onto a virtual machine...
Solved Help with Windows 10 installation/boot in Installation and Upgrade
This has been a constant problem for me ever since I got my upgrade, I have gone through installation after installation, always at the 75% mark do I get the notice "system_service_exception igdkmd64.sys" and the installation fails, but then it...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 14:01.
Find Us