Graphics card with HDMI input

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 970
    Microsoft Windows 10 Professional (x64) Build 19045.2846
    Thread Starter
       #11

    thanks
      My Computer


  2. Posts : 23,281
    Win 10 Home ♦♦♦19045.4355 (x64) [22H2]
       #12
      My Computer


  3. Posts : 2,734
    Windows 10
       #13

    There are two alternatives:

    1. Use the DVI-D output with an adapter cable to HDMI.(Cheapest solution).

    2. Install a PCI-E Graphics Card with HDMI output. Examples have been mentioned.
      My Computer


  4. Posts : 970
    Microsoft Windows 10 Professional (x64) Build 19045.2846
    Thread Starter
       #14

    Helmut said:
    There are two alternatives:

    1. Use the DVI-D output with an adapter cable to HDMI.(Cheapest solution).
    Turns out I had one of those after all. Works fine.

    Any difference in performance/reliability as the HDMI cable?
      My Computer


  5. Posts : 9,791
    Mac OS Catalina
       #15

    No there is not as long as the cable is not damaged.
      My Computer


  6. Posts : 4,594
    several
       #16

    if the cable is not absolutely flush, with the slightest movement of the cable or the computer, it loses contact,
    I gave the port a squeeze with needlenose pliers, fits more snugly now.
      My Computer


  7. Posts : 2,734
    Windows 10
       #17

    kitpzyxmsir said:

    Any difference in performance/reliability as the HDMI cable?
    No, you seem to be using 1920 x 1080 which is quite modest, well within the specs.
      My Computer


  8. Posts : 2,191
    Windows 10 Pro 64-bit v22H2
       #18

    kitpzyxmsir said:
    Turns out I had one of those after all. Works fine.

    Any difference in performance/reliability as the HDMI cable?
    Electrically DVI and HDMI are the same for video. All the adapter has to do wire up each end differently. The only real difference is that DVI doesn't support audio while HDMI does. That means if the monitor or TV you connect has speakers then to use them you would have to run a separate audio cable from the computer.
      My Computers


  9. Posts : 970
    Microsoft Windows 10 Professional (x64) Build 19045.2846
    Thread Starter
       #19

    SIW2 said:
    I gave the port a squeeze with needlenose pliers, fits more snugly now.
    How did you accomplish that?

    - - - Updated - - -

    [QUOTE=MisterEd;2531217]Electrically DVI and HDMI are the same for video. All the adapter has to do wire up each end differently. The only real difference is that DVI doesn't support audio while HDMI does. That means if the monitor or TV you connect has speakers then to use them you would have to run a separate audio cable from the computer.[/QUOTE @MisterEd,

    All I did was replace the HDMI with the DVI. TV/monitor has speakers. Audio works. No separate audio cable.

    Did I miss something that will cause a problem elsewhere with some part of the operation?
      My Computer


  10. Posts : 4,594
    several
       #20

    With needlenose pliers, how else? took the mobo out of the case, and squeezed the top and bottom of the hdmi port together a tiny bit. The bottom bit has a split and will bend up a little.Took a few attempts to get it just right. It is bit fiddly getting one jaw of the plier underneath the bottom lip. If pushed too far, it can be bent out again. Or if there is obvious gap where the bottom bit has separated, squeeze the sides together.

    Graphics card with HDMI input-hdmi.jpg
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 13:21.
Find Us




Windows 10 Forums