disabled Windows 10 startup file in system Configuration utility


  1. steeleb
    Posts : 4
    Windows 10 Professional 64-bit
       New #1

    disabled Windows 10 startup file in system Configuration utility


    I accidentally disabled Windows 10 startup file in system Configuration utility and now I get a spinning Circle and cannot open or get into my PC running Windows 10.
    I get an error code 0 xc 0 0 0 0 0 0 e. I can get to the screen that has Recovery Options
    I clicked troubleshoot, then Advanced Options, Startup Repair, and System Restore but
    None of these recovery options work I can get to Command Prompt it has my drive letter as X (& all my other Drive letters are all wrong) but I dont know what to do here.
    Please Help !!
    I don't want to Reset my PC (Reinstall windows) because of all the programs I have installed on different drives over the years. My OS is on a 240 GB SSD
      My Computer
    Quote Quote

  3. dalchina
    Posts : 43,024
    Win 10 Pro (22H2) (2nd PC is 22H2)
       New #2

    Please see the 3rd response here:
    https://answers.microsoft.com/en-us/...4-74869ce0437c

    You may be able to force your PC to boot to Safe Mode and so correct the change you made.
    You will need to boot your PC from a Win 10 bootable disk. (Tutorial exists showing you how to create one- on another PC- if you don't have one already).

    Boot to the Command Prompt of your boot disk (see methods to create below). Enter these BOLD commands and press ENTER after each.
    (Note the colon after C with no space; then the spaces which are important - one after T before / & T before { & } before B & Y before L)

    C:

    BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY

    EXIT

    You are back to the boot screen -> Shutdown the computer.

    Boot back up and "immediately" start tapping F8 (That means power button - then F8).

    Hopefully that should get you into Safe Mode.

    --------------------------------------------------------------------------------------

    To reverse that you can use the same steps and type these (again note spaces)

    C:

    BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY STANDARD
    etc (see the link).


    Otherwise:

    If your Windows build (not specified - you were prompted for this when you wrote your post- so many omit that) is old- 1709 or earlier, you will have backup copies of the registry (Regback). That was disabled at the end of 1709 by MS.

    If you have followed the oh, so often given advice on tenforums and elsewhere to routinely and regularly use disk imaging e.g. Macrium Reflect - free/paid- (critical for you:
    I don't want to Reset my PC (Reinstall windows) because of all the programs I have installed on different drives over the years. My OS is on a 240 GB SSD
    )
    you can restore your PC from a recently created disk image.
    Last edited by dalchina; 16 Oct 2020 at 03:04.
      My Computers
    Quote Quote

  4. Fabler2
    Posts : 4,805
    Windows 10 preview 64-bit Home
       New #3

    You could also try to fix boot issues with Macrium free recovery medium that you can create on another computer.
    Fix Boot Problems

    Plenty of tutorials here and online how to create a recovery medium and to boot from.

    Macrium Software | Macrium Reflect Free
      My Computers
    Quote Quote

  6. zbook
    Posts : 41,481
    windows 10 professional version 1607 build 14393.969 64 bit
       New #4

    steeleb said:
    I accidentally disabled Windows 10 startup file in system Configuration utility
    List the steps that were made.

    When using Windows Recovery Environment (RE) the drive letters may change.
    So you typically need to identify the drive letter when running commands in Windows RE.


    Find a flash drive with free space.

    Copy and paste to the flash drive:





    Code:
    diskpart
lis dis
lis vol 
sel dis 0
det dis
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par
sel dis 1
det dis
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par
sel dis 2
det dis
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par


    Code:
    bcdedit /enum all
bcdedit | find "osdevice"
bootrec /fixmbr
bootrec /fixboot
bootrec /scanow
bootsect /nt60





    Boot to the Windows 10 iso.

    Click startup repair > indicate whether it does or does not display a srttrail.txt message.

    Click command prompt > open Administrator: X:\Windows\System32\cmd.exe > X:\Sources:

    type: notepad
    type: notepad (second)
    (This should open two notepad windows)


    Insert the flash drive with the above commands into any usb port

    On notepad click file > open files saved on the flash drive



    paste the first group of commands (one at a time or all at one time)
    click enter
    (alternative approach is to type each command)


    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into notepad > click file > save to the flash drive



    paste the second group of commands (one at a time or all at one time)
    click enter
    (alternative approach is to type each command)


    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into notepad > click file > save to the flash drive


    Move the flash drive to a working computer > upload into this thread


    (an alternative to the flash drive is to take pictures with a camera or smartphone camera > upload pictures into the thread)


    How to Upload and Post Screenshots and Files at Ten Forums
    Last edited by zbook; 16 Oct 2020 at 03:15.
      My Computer
    Quote Quote

  7. steeleb
    Posts : 4
    Windows 10 Professional 64-bit
    Thread Starter
       New #5

    Thanks very much but I did go to the Microsoft website and tried that did, but it didnt work[/SIZE][/SIZE]
      My Computer
    Quote Quote

  8. dalchina
    Posts : 43,024
    Win 10 Pro (22H2) (2nd PC is 22H2)
       New #6

    Please be more specific.
    a. Were you able to boot your PC from a Win 10 install disk and navigate to a Command Prompt?
    b. Were you then able to access your Windows partition successfully, and confirm which drive letter that was? (May not be C: as seen from that command prompt).
    c. What happened when you issued the command
    BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY
    ?

    If all the above was done correctly, what happened when you rebooted?


    Can you see 'it didn't work' is just a wee bit vague, and offers no way forward for someone to help you? Uh... lots of typing!
      My Computers
    Quote Quote

  9. steeleb
    Posts : 4
    Windows 10 Professional 64-bit
    Thread Starter
       New #7

    upload code 01 & 02 from cmd prompt


    copy from cmd 01 below (maybe I should have uploaded the notepad files ?)
    *******************
    Partition 2Type : e3c9e316-0b5c-4db8-817d-f92df00215aeHidden : YesRequired: NoAttrib : 0X8000000000000000Offset in Bytes: 273678336There is no volume associated with this partition.DISKPART> sel par 3Partition 3 is now the selected partition.DISKPART> det parPartition 3Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden : YesRequired: NoAttrib : 0X4000000000000000Offset in Bytes: 290455552 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 2 Old Windows NTFS Partition 59 GB Healthy HiddenDISKPART> sel par 4Partition 4 is now the selected partition.DISKPART> det parPartition 4Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden : NoRequired: NoAttrib : 0000000000000000Offset in Bytes: 64654147584 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 3 C Web Saved NTFS Partition 101 GB HealthyDISKPART> sel par 5Partition 5 is now the selected partition.DISKPART> det parPartition 5Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden : NoRequired: NoAttrib : 0000000000000000Offset in Bytes: 173172326400 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 4 D Programs NTFS Partition 185 GB HealthyDISKPART> sel par 6Partition 6 is now the selected partition.DISKPART> det parPartition 6Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden : NoRequired: NoAttrib : 0000000000000000Offset in Bytes: 372807565312 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 5 E Pics Music NTFS Partition 40 GB HealthyDISKPART> sel dis 1Disk 1 is now the selected disk.DISKPART> det disPatriot BurstDisk ID: {F6982DA0-A1CC-03A4-680B-A63D7328E900}Type : SATAStatus : OnlinePath : 2Target : 0LUN ID : 0Location Path : PCIROOT(0)#PCI(1700)#ATA(C02T00L00)Current Read-only State : NoRead-only : NoBoot Disk : NoPagefile Disk : NoHibernation File Disk : NoCrashdump Disk : NoClustered Disk : No Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 10 Windows NTFS Partition 218 GB Healthy Volume 11 NTFS Partition 2891 MB Healthy Volume 12 OTHER FAT32 Partition 258 MB Healthy Hidden Volume 13 Windows RE NTFS Partition 2006 MB Healthy HiddenDISKPART> sel par 1Partition 1 is now the selected partition.DISKPART> det parPartition 1Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93bHidden : YesRequired: NoAttrib : 0X8000000000000000Offset in Bytes: 1048576 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 12 OTHER FAT32 Partition 258 MB Healthy HiddenDISKPART> sel par 2Partition 2 is now the selected partition.DISKPART> det parPartition 2Type : e3c9e316-0b5c-4db8-817d-f92df00215aeHidden : YesRequired: NoAttrib : 0X8000000000000000Offset in Bytes: 271581184There is no volume associated with this partition.DISKPART> sel par 3Partition 3 is now the selected partition.DISKPART> det parPartition 3Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden : NoRequired: NoAttrib : 0X8000000000000000Offset in Bytes: 288358400 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 10 Windows NTFS Partition 218 GB HealthyDISKPART> sel par 4Partition 4 is now the selected partition.DISKPART> det parPartition 4Type : de94bba4-06d1-4d40-a16a-bfd50179d6acHidden : YesRequired: NoAttrib : 0X8000000000000000Offset in Bytes: 234920869888 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 13 Windows RE NTFS Partition 2006 MB Healthy HiddenDISKPART> sel par 5Partition 5 is now the selected partition.DISKPART> det parPartition 5Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden : NoRequired: NoAttrib : 0X8000000000000000Offset in Bytes: 237024313344 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 11 NTFS Partition 2891 MB HealthyDISKPART> sel par 6The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel dis 2Disk 2 is now the selected disk.DISKPART> det disSeagate Expansion SCSI Disk DeviceDisk ID: 0667A6B3Type : USBStatus : OnlinePath : 0Target : 0LUN ID : 0Location Path : UNAVAILABLECurrent Read-only State : NoRead-only : NoBoot Disk : NoPagefile Disk : NoHibernation File Disk : NoCrashdump Disk : NoClustered Disk : No Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 14 H Local Disk- NTFS Partition 931 GB HealthyDISKPART> sel par 1Partition 1 is now the selected partition.DISKPART> det parPartition 1Type : 07Hidden: NoActive: YesOffset in Bytes: 1048576 Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- --------* Volume 14 H Local Disk- NTFS Partition 931 GB HealthyDISKPART> sel par 2The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 3The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 4The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 5The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 6The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det par

    copy from cmd 02 below
    *******************
    The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 3The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 4The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 5The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> sel par 6The specified partition is not valid.Please select a valid partition.There is no partition selected.DISKPART> det parThere is no partition selected.Please select a partition and try again.DISKPART> bcdedit /enum allMicrosoft DiskPart version 10.0.10586ACTIVE - Mark the selected partition as active.ADD - Add a mirror to a simple volume.ASSIGN - Assign a drive letter or mount point to the selected volume.ATTRIBUTES - Manipulate volume or disk attributes.ATTACH - Attaches a virtual disk file.AUTOMOUNT - Enable and disable automatic mounting of basic volumes.BREAK - Break a mirror set.CLEAN - Clear the configuration information, or all information, off the disk.COMPACT - Attempts to reduce the physical size of the file.CONVERT - Convert between different disk formats.CREATE - Create a volume, partition or virtual disk.DELETE - Delete an object.DETAIL - Provide details about an object.DETACH - Detaches a virtual disk file.EXIT - Exit DiskPart.EXTEND - Extend a volume.EXPAND - Expands the maximum size available on a virtual disk.FILESYSTEMS - Display current and supported file systems on the volume.FORMAT - Format the volume or partition.GPT - Assign attributes to the selected GPT partition.HELP - Display a list of commands.IMPORT - Import a disk group.INACTIVE - Mark the selected partition as inactive.LIST - Display a list of objects.MERGE - Merges a child disk with its parents.ONLINE - Online an object that is currently marked as offline.OFFLINE - Offline an object that is currently marked as online.RECOVER - Refreshes the state of all disks in the selected pack. Attempts recovery on disks in the invalid pack, and resynchronizes mirrored volumes and RAID5 volumes that have stale plex or parity data.REM - Does nothing. This is used to comment scripts.REMOVE - Remove a drive letter or mount point assignment.REPAIR - Repair a RAID-5 volume with a failed member.RESCAN - Rescan the computer looking for disks and volumes.RETAIN - Place a retained partition under a simple volume.SAN - Display or set the SAN policy for the currently booted OS.SELECT - Shift the focus to an object.SETID - Change the partition type.SHRINK - Reduce the size of the selected volume.UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or master boot record (MBR) signature of a disk.DISKPART> bcdedit | find "osdevice"Microsoft DiskPart version 10.0.10586ACTIVE - Mark the selected partition as active.ADD - Add a mirror to a simple volume.ASSIGN - Assign a drive letter or mount point to the selected volume.ATTRIBUTES - Manipulate volume or disk attributes.ATTACH - Attaches a virtual disk file.AUTOMOUNT - Enable and disable automatic mounting of basic volumes.BREAK - Break a mirror set.CLEAN - Clear the configuration information, or all information, off the disk.COMPACT - Attempts to reduce the physical size of the file.CONVERT - Convert between different disk formats.CREATE - Create a volume, partition or virtual disk.DELETE - Delete an object.DETAIL - Provide details about an object.DETACH - Detaches a virtual disk file.EXIT - Exit DiskPart.EXTEND - Extend a volume.EXPAND - Expands the maximum size available on a virtual disk.FILESYSTEMS - Display current and supported file systems on the volume.FORMAT - Format the volume or partition.GPT - Assign attributes to the selected GPT partition.HELP - Display a list of commands.IMPORT - Import a disk group.INACTIVE - Mark the selected partition as inactive.LIST - Display a list of objects.MERGE - Merges a child disk with its parents.ONLINE - Online an object that is currently marked as offline.OFFLINE - Offline an object that is currently marked as online.RECOVER - Refreshes the state of all disks in the selected pack. Attempts recovery on disks in the invalid pack, and resynchronizes mirrored volumes and RAID5 volumes that have stale plex or parity data.REM - Does nothing. This is used to comment scripts.REMOVE - Remove a drive letter or mount point assignment.REPAIR - Repair a RAID-5 volume with a failed member.RESCAN - Rescan the computer looking for disks and volumes.RETAIN - Place a retained partition under a simple volume.SAN - Display or set the SAN policy for the currently booted OS.SELECT - Shift the focus to an object.SETID - Change the partition type.SHRINK - Reduce the size of the selected volume.UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or master boot record (MBR) signature of a disk.DISKPART> bootrec /fixmbrMicrosoft DiskPart version 10.0.10586ACTIVE - Mark the selected partition as active.ADD - Add a mirror to a simple volume.ASSIGN - Assign a drive letter or mount point to the selected volume.ATTRIBUTES - Manipulate volume or disk attributes.ATTACH - Attaches a virtual disk file.AUTOMOUNT - Enable and disable automatic mounting of basic volumes.BREAK - Break a mirror set.CLEAN - Clear the configuration information, or all information, off the disk.COMPACT - Attempts to reduce the physical size of the file.CONVERT - Convert between different disk formats.CREATE - Create a volume, partition or virtual disk.DELETE - Delete an object.DETAIL - Provide details about an object.DETACH - Detaches a virtual disk file.EXIT - Exit DiskPart.EXTEND - Extend a volume.EXPAND - Expands the maximum size available on a virtual disk.FILESYSTEMS - Display current and supported file systems on the volume.FORMAT - Format the volume or partition.GPT - Assign attributes to the selected GPT partition.HELP - Display a list of commands.IMPORT - Import a disk group.INACTIVE - Mark the selected partition as inactive.LIST - Display a list of objects.MERGE - Merges a child disk with its parents.ONLINE - Online an object that is currently marked as offline.OFFLINE - Offline an object that is currently marked as online.RECOVER - Refreshes the state of all disks in the selected pack. Attempts recovery on disks in the invalid pack, and resynchronizes mirrored volumes and RAID5 volumes that have stale plex or parity data.REM - Does nothing. This is used to comment scripts.REMOVE - Remove a drive letter or mount point assignment.REPAIR - Repair a RAID-5 volume with a failed member.RESCAN - Rescan the computer looking for disks and volumes.RETAIN - Place a retained partition under a simple volume.SAN - Display or set the SAN policy for the currently booted OS.SELECT - Shift the focus to an object.SETID - Change the partition type.SHRINK - Reduce the size of the selected volume.UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or master boot record (MBR) signature of a disk.DISKPART> bootrec /fixbootMicrosoft DiskPart version 10.0.10586ACTIVE - Mark the selected partition as active.ADD - Add a mirror to a simple volume.ASSIGN - Assign a drive letter or mount point to the selected volume.ATTRIBUTES - Manipulate volume or disk attributes.ATTACH - Attaches a virtual disk file.AUTOMOUNT - Enable and disable automatic mounting of basic volumes.BREAK - Break a mirror set.CLEAN - Clear the configuration information, or all information, off the disk.COMPACT - Attempts to reduce the physical size of the file.CONVERT - Convert between different disk formats.CREATE - Create a volume, partition or virtual disk.DELETE - Delete an object.DETAIL - Provide details about an object.DETACH - Detaches a virtual disk file.EXIT - Exit DiskPart.EXTEND - Extend a volume.EXPAND - Expands the maximum size available on a virtual disk.FILESYSTEMS - Display current and supported file systems on the volume.FORMAT - Format the volume or partition.GPT - Assign attributes to the selected GPT partition.HELP - Display a list of commands.IMPORT - Import a disk group.INACTIVE - Mark the selected partition as inactive.LIST - Display a list of objects.MERGE - Merges a child disk with its parents.ONLINE - Online an object that is currently marked as offline.OFFLINE - Offline an object that is currently marked as online.RECOVER - Refreshes the state of all disks in the selected pack. Attempts recovery on disks in the invalid pack, and resynchronizes mirrored volumes and RAID5 volumes that have stale plex or parity data.REM - Does nothing. This is used to comment scripts.REMOVE - Remove a drive letter or mount point assignment.REPAIR - Repair a RAID-5 volume with a failed member.RESCAN - Rescan the computer looking for disks and volumes.RETAIN - Place a retained partition under a simple volume.SAN - Display or set the SAN policy for the currently booted OS.SELECT - Shift the focus to an object.SETID - Change the partition type.SHRINK - Reduce the size of the selected volume.UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or master boot record (MBR) signature of a disk.DISKPART> bootrec /scanowMicrosoft DiskPart version 10.0.10586ACTIVE - Mark the selected partition as active.ADD - Add a mirror to a simple volume.ASSIGN - Assign a drive letter or mount point to the selected volume.ATTRIBUTES - Manipulate volume or disk attributes.ATTACH - Attaches a virtual disk file.AUTOMOUNT - Enable and disable automatic mounting of basic volumes.BREAK - Break a mirror set.CLEAN - Clear the configuration information, or all information, off the disk.COMPACT - Attempts to reduce the physical size of the file.CONVERT - Convert between different disk formats.CREATE - Create a volume, partition or virtual disk.DELETE - Delete an object.DETAIL - Provide details about an object.DETACH - Detaches a virtual disk file.EXIT - Exit DiskPart.EXTEND - Extend a volume.EXPAND - Expands the maximum size available on a virtual disk.FILESYSTEMS - Display current and supported file systems on the volume.FORMAT - Format the volume or partition.GPT - Assign attributes to the selected GPT partition.HELP - Display a list of commands.IMPORT - Import a disk group.INACTIVE - Mark the selected partition as inactive.LIST - Display a list of objects.MERGE - Merges a child disk with its parents.ONLINE - Online an object that is currently marked as offline.OFFLINE - Offline an object that is currently marked as online.RECOVER - Refreshes the state of all disks in the selected pack. Attempts recovery on disks in the invalid pack, and resynchronizes mirrored volumes and RAID5 volumes that have stale plex or parity data.REM - Does nothing. This is used to comment scripts.REMOVE - Remove a drive letter or mount point assignment.REPAIR - Repair a RAID-5 volume with a failed member.RESCAN - Rescan the computer looking for disks and volumes.RETAIN - Place a retained partition under a simple volume.SAN - Display or set the SAN policy for the currently booted OS.SELECT - Shift the focus to an object.SETID - Change the partition type.SHRINK - Reduce the size of the selected volume.UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or master boot record (MBR) signature of a disk.DISKPART> bootsect /nt60

    - - - Updated - - -

    Maybe I was not clear (sorry I panicked!)
    all I did was in the Run dialog box typed "msconfig" and in the services tab, I thought I had checked hide all Microsoft services    ? then I clicked disable all (except my antivirus) in the past this has decreased Startup time ( usually a few seconds) because my PC has slowed down

    Then I got a spinning Circle and cannot open or get into my PC running Windows 10.
    I got an error code 0 xc 0 0 0 0 0 0 e.
    I can get to the screen that has Recovery Options
    I clicked troubleshoot, then Advanced Options, Startup Repair, and System Restore
    but None of these recovery options work
    I can get to Command Prompt but I dont know what to do here.
    Please Help !!
    I don't want to Reset my PC (Reinstall windows) because of all the programs I have installed on different drives over the years. My OS is on a 240 GB SSD[/QUOTE]
      My Computer
    Quote Quote

  10. zbook
    Posts : 41,481
    windows 10 professional version 1607 build 14393.969 64 bit
       New #8

    Please post share links so the data becomes readable: one drive, drop box, or google drive

    An alternative is to repost:
    Use this link as needed when posting results:
    How to Change Post Editor to Source or WYSIWYG Mode at TenForums.com
      My Computer
    Quote Quote

  12. steeleb
    Posts : 4
    Windows 10 Professional 64-bit
    Thread Starter
       New #9

    I will get links to notepad files, I didn't think the way I uploaded would be helpful sorry

    - - - Updated - - -

    Please bear with me I cannot do this from my phone I will try to get borrow another laptop tonight I really do appreciate your help
      My Computer
    Quote Quote

 

  Related Discussions
Greetings to the Windows 10 forum, I'm having a problem that I cannot resolve and there is very little to no information about this specific issue that I can find. About a week ago something corrupted my W10 system and I ended up in the blue...
I need to use Task Scheduler to run a .vbs file with highest privileges at system startup. The following are my settings. The file is not run at system startup but can be run manually in Task Scheduler. Can anyone help? 113061113062113063
Hello! I've been thinking... Now with virtual displays and such, it would be really handy to be able to do some startup configuration. For example, on my first display to have opened the internet, on the second to have opened all the different...
Windows startup configuration
in Installation and Upgrade

I have an issue that I can't solve; I upgraded to Windows 10 from Windows 7 and everthing installed without problems exept when I start or restart with a usb flash drive inserted, I get "Boot manager is missing". If I remove the flash drive and...
Hi All, My Windows 10 home-64b works flawlessly, but I've realized that the system configuration stubbornly continues to initiate under "Selective Startup" instead of "Normal Startup" which makes me wonder which "services" cannot be loaded. I've...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 01:14.
Find Us




Windows 10 Forums