New
#1
S.M.A..R.T HDD checking -- want a Windows equivalent
Hi folks
Any Windows Gurus on Hard Disk management around here
Got a dubious HDD on a Linux NAS and also I think a failing one on a Windows Server box -- but is there an equivalent tool in Windows that gives similar info that I can use on the Windows server box :
Here's the Linux thing :
-----------------------------
[root@wulf hrafn]# smartctl --xall /dev/sdc
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.9.1-arch1-1] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, smartmontools
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1ER166
Serial Number: Z5037CTN
LU WWN Device Id: 5 000c50 091b9b9e3
Firmware Version: CC26
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Oct 29 07:23:02 2020 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 89) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 321) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 087 087 006 - 131656514
3 Spin_Up_Time PO---- 094 093 000 - 0
4 Start_Stop_Count -O--CK 099 099 020 - 1583
5 Reallocated_Sector_Ct PO--CK 090 090 010 - 12616
7 Seek_Error_Rate POSR-- 075 060 030 - 33067354
9 Power_On_Hours -O--CK 085 085 000 - 13564
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1275
183 Runtime_Bad_Block -O--CK 098 098 000 - 2
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 262
188 Command_Timeout -O--CK 097 087 000 - 35 49 103
189 High_Fly_Writes -O-RCK 074 074 000 - 26
190 Airflow_Temperature_Cel -O---K 071 045 045 Past 29 (Min/Max 22/29)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 244
193 Load_Cycle_Count -O--CK 059 059 000 - 83320
194 Temperature_Celsius -O---K 029 055 000 - 29 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 001 001 000 - 37200
198 Offline_Uncorrectable ----C- 001 001 000 - 37200
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 4457h+10m+53.748s
241 Total_LBAs_Written ------ 100 253 000 - 108633990361
242 Total_LBAs_Read ------ 100 253 000 - 243260782935
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5176 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL,SL VS 10 Device vendor specific log
0xc3 GPL,SL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 262 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 262 [1] occurred at disk power-on lifetime: 13564 hours (565 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 8e 4a bf f8 00 00 Error: UNC at LBA = 0x8e4abff8 = 2387263480
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 08 00 00 8e 4a bf f8 40 00 00:42:39.148 READ FPDMA QUEUED
60 00 00 00 08 00 00 76 44 b8 08 40 00 00:42:39.107 READ FPDMA QUEUED
60 00 00 00 08 00 00 46 f7 a4 08 40 00 00:42:39.037 READ FPDMA QUEUED
60 00 00 00 08 00 00 3b 38 8f f8 40 00 00:42:35.347 READ FPDMA QUEUED
60 00 00 00 08 00 00 2f 75 c3 f8 40 00 00:42:31.673 READ FPDMA QUEUED
Error 261 [0] occurred at disk power-on lifetime: 13564 hours (565 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 52 e9 5f b8 00 00 Error: UNC at LBA = 0x52e95fb8 = 1391026104
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 c0 00 00 52 eb a3 40 40 00 00:28:36.077 READ FPDMA QUEUED
60 00 00 00 08 00 00 52 e7 1b a8 40 00 00:28:36.074 READ FPDMA QUEUED
60 00 00 00 f0 00 00 52 e9 5f 10 40 00 00:28:36.074 READ FPDMA QUEUED
60 00 00 00 98 00 00 52 e4 d7 30 40 00 00:28:36.068 READ FPDMA QUEUED
60 00 00 00 c0 00 00 52 e7 1b 40 40 00 00:28:36.064 READ FPDMA QUEUED
Error 260 [19] occurred at disk power-on lifetime: 12538 hours (522 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 f6 03 50 58 00 00 Error: UNC at LBA = 0xf6035058 = 4127412312
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 01 30 35 6e 00 40 00 07:30:45.706 READ FPDMA QUEUED
60 00 00 01 00 00 01 30 35 6d 00 40 00 07:30:45.625 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 d9 00 40 00 07:30:45.483 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 d8 00 40 00 07:30:45.477 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 d7 00 40 00 07:30:45.472 READ FPDMA QUEUED
Error 259 [18] occurred at disk power-on lifetime: 12538 hours (522 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 f6 03 50 58 00 00 Error: UNC at LBA = 0xf6035058 = 4127412312
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 f5 94 d1 00 40 00 07:30:41.372 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 d0 00 40 00 07:30:41.368 READ FPDMA QUEUED
60 00 00 00 80 00 00 f6 03 50 00 40 00 07:30:41.366 READ FPDMA QUEUED
60 00 00 00 80 00 00 f6 03 4f 80 40 00 07:30:41.362 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 cf 00 40 00 07:30:41.360 READ FPDMA QUEUED
Error 258 [17] occurred at disk power-on lifetime: 12538 hours (522 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 f6 03 47 30 00 00 Error: UNC at LBA = 0xf6034730 = 4127409968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 01 30 35 6a 00 40 00 07:30:37.729 READ FPDMA QUEUED
60 00 00 01 00 00 01 30 35 69 00 40 00 07:30:37.642 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 c5 00 40 00 07:30:37.590 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 c4 00 40 00 07:30:37.585 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 c3 00 40 00 07:30:37.557 READ FPDMA QUEUED
Error 257 [16] occurred at disk power-on lifetime: 12538 hours (522 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 f6 03 47 30 00 00 Error: UNC at LBA = 0xf6034730 = 4127409968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 01 30 35 66 00 40 00 07:30:33.678 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 af 00 40 00 07:30:33.677 READ FPDMA QUEUED
60 00 00 01 00 00 00 f6 03 46 80 40 00 07:30:33.675 READ FPDMA QUEUED
60 00 00 01 00 00 00 f5 94 ae 00 40 00 07:30:33.671 READ FPDMA QUEUED
60 00 00 01 00 00 00 f6 03 45 80 40 00 07:30:33.667 READ FPDMA QUEUED
Error 256 [15] occurred at disk power-on lifetime: 12531 hours (522 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 36 b4 6d a8 00 00 Error: UNC at LBA = 0x36b46da8 = 917794216
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 3d ca 9f 80 40 00 01:09:13.709 READ FPDMA QUEUED
60 00 00 01 00 00 00 3d ca 9e 80 40 00 01:09:13.703 READ FPDMA QUEUED
60 00 00 01 00 00 00 3d ca 9d 80 40 00 01:09:13.698 READ FPDMA QUEUED
60 00 00 00 08 00 00 36 b4 6d a8 40 00 01:09:13.698 READ FPDMA QUEUED
60 00 00 00 08 00 00 36 b4 6d a0 40 00 01:09:13.697 READ FPDMA QUEUED
Error 255 [14] occurred at disk power-on lifetime: 12531 hours (522 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 53 00 00 00 00 36 b4 6d a8 00 00 Error: UNC at LBA = 0x36b46da8 = 917794216
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 01 00 00 00 3d ca 96 80 40 00 01:09:09.991 READ FPDMA QUEUED
60 00 00 01 00 00 00 36 b4 6d 80 40 00 01:09:09.990 READ FPDMA QUEUED
60 00 00 01 00 00 00 36 b4 6c 80 40 00 01:09:09.984 READ FPDMA QUEUED
60 00 00 01 00 00 00 3d ca 95 80 40 00 01:09:09.981 READ FPDMA QUEUED
60 00 00 01 00 00 00 36 b4 6b 80 40 00 01:09:09.979 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 22/28 Celsius
Lifetime Min/Max Temperature: 14/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 7 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
---------------------------------------------------------
I've googled around but can't find any info -- It's not possible easily to remove the HDD and put into the NAS box to run the diagnostic so that's why I'm looking for a Windows tool.
Cheers
jimbo