1.    06 Aug 2015 #1
    Join Date : Aug 2015
    Posts : 4
    Windows 10 Pro N - 64 bit

    Prevent mouse from getting stuck in the corners [dual screen setup]


    Hello everyone,

    I use the window snapping feature a lot, but mainly for maximizing windows. I have a dual screen setup and when I drag a window along the top edge of the screen onto the second screen, it becomes stuck. This is very annoying, because I often want to move a window from screen 1 to screen 2 and maximize it at the same time.
    I first thought that this issue was related to the new ability to snap windows to one of the four corners. But even if I turn off snapping entirely and even if I am not dragging a window at all, my mouse becomes stuck in the top right corner of the first screen.
    How can I fix this?


    Greetings,
    Pfaeff
      My ComputerSystem Spec
  2.    06 Aug 2015 #2
    Join Date : Aug 2015
    UK
    Posts : 26
    Windows 10

    Quote Originally Posted by Pfaeff View Post
    Hello everyone,

    I use the window snapping feature a lot, but mainly for maximizing windows. I have a dual screen setup and when I drag a window along the top edge of the screen onto the second screen, it becomes stuck. This is very annoying, because I often want to move a window from screen 1 to screen 2 and maximize it at the same time.
    I first thought that this issue was related to the new ability to snap windows to one of the four corners. But even if I turn off snapping entirely and even if I am not dragging a window at all, my mouse becomes stuck in the top right corner of the first screen.
    How can I fix this?


    Greetings,
    Pfaeff
    Do both screens have the same resolution ?
    Are they aligned exactly side by side in the Screen Resolutions settings (You can see the co-ordinates when you drag the monitor icon up or down)?

    Either of these will cause the mouse to "stick" at the top or bottom edges of the screens
      My ComputerSystem Spec
  3.    06 Aug 2015 #3
    Join Date : Aug 2015
    Posts : 4
    Windows 10 Pro N - 64 bit
    Thread Starter

    Both have the exact same resolution (1920x1080) and they are aligned exactly side-by-side. It even says "1920, 0" for the second screen.
      My ComputerSystem Spec
  4.    06 Aug 2015 #4
    Join Date : Aug 2015
    UK
    Posts : 26
    Windows 10

    Just checking the obvious.
      My ComputerSystem Spec
  5.    06 Aug 2015 #5
    Join Date : Aug 2015
    Posts : 4
    Windows 10 Pro N - 64 bit
    Thread Starter

    So this normally doesn't happen?
      My ComputerSystem Spec
  6.    06 Aug 2015 #6
    Join Date : Jul 2015
    Florida
    Posts : 202
    Windows 10 Pro 64-bit

    I think it's a built in feature. It happens on my 8.1 machine also. I think it's to keep on the monitor you are using if you have more than one. Like as a way to not wonder off to easy if you bump the mouse when not in use.
      My ComputerSystem Spec
  7.    06 Aug 2015 #7
    Join Date : Aug 2015
    Posts : 1
    Windows 10

    I have this exact same issue. I run 3 monitors, on every corner it catches. Super annoying.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
windows 10 stuck at login screen does not recognize mouse or keyboard
I have followed several similar threads and their fixes for this problem with no result. After downloading the Win 10 upgrade, my system then said "loading updates". Then it restarted with a blue login screen saying "Welcome Back!" And a box to...
Drivers and Hardware
Mouse Cursor Stuck
I just upgraded from 8.1 (brand new) and I can move my mouse cursor for a couple seconds then it freezes and starts showing a loading circle every few seconds.
Drivers and Hardware
Virtual corners with dual monitors
So, I just upgraded from Windows 7, to Windows 10, and I've discovered an infuriating "feature". My dual monitor set-up is a little unorthodox. My desk is too small for two monitors side by side, and the shelf behind my desk is too short to have...
General Support
Issue with dual monitors- mouse movement blocked top/bottom of screen
Edited: I've done some looking up on what the issue is, and I believe that it's something commonly referred to as "sticky corners". There is a few pixels space on the bottom and top of the screen (between both monitors) which does not allow mouse...
General Support
Stuck at Windows 10 setup after install.
I just got done installing Windows 10 and am sitting at the next step which I believe the setup just before loading the desktop. It just locks up and then my system reboots after hitting "Next". My frustration level is rapidly increasing and...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:41.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums