Hi manchua,
There were 15 bsod mini dump files debugged.
There was no definitive misbehaving driver displayed.
Bsod can be cause by hardware drivers, software drivers, or hardware.
Highest on the list is hardware memory or RAM.
Open administrative command prompt and type or run these commands:
1) sfc /scannow
2) dism /online /cleanup-image /restorehealth
3) chkdsk /scan
4) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
5) Turn off Windows fast startup:
Turn On or Off Fast Startup in Windows 10 Windows 10 Performance Maintenance Tutorials
6) perform windows update and post any failed kb# with error code
7) Run memtest86+ version 5.01 for at least 8 runs.
This may take many hours so plan to run it overnight.
http://www.memtest.org/
When Memtest86+ has completed 8 or more runs use a camera or smart phone to make an image of the results to post into the thread.
https://answers.microsoft.com/en-us/...-test-ram.html
For memory testing the workstation will be offline.
There is 16GB RAM on 2 DIMM
If they are dual channel you will want to check them simultaneously.
If they are single channel you can test them one at a time.
If testing both at one time displays just 1 error that is a fail. You can then abort the test.
If there is a fail you will then test 1 RAM at a time in the same DIMM to see which RAM has failed.
Again if there is just 1 error you will abort the test.
If both pass in the same DIMM then you will move one RAM to another DIMM to test the DIMM/Mother Board
It is estimated that it will take 1 to 2 hours per GB of RAM so plan to test overnight or over the weekend.
Most critical in RAM testing is the number of passes. It must be at least 8 passes to reduce the false negatives.
Anything less than 8 passes needs to be repeated to make a valid test.
Please use a camera to take pictures of each result and post an image into the thread.
Code:
Windows failed fast startup with error status 0xC00000D4.
Code:
Dump file creation failed due to error during dump creation.
Code:
Installation Failure: Windows failed to install the following update with error 0x800736CC: 2017-07 Cumulative Update for Windows 10 Version 1703 for x64-based Systems (KB4025342).
Code:
Dump file creation failed due to error during dump creation.
Code:
Installation Failure: Windows failed to install the following update with error 0x800736CC: 2017-07 Cumulative Update for Windows 10 Version 1703 for x64-based Systems (KB4025342).
Code:
Crash dump initialization failed!
Code:
BugCheck DE, {2, ffffb2082b920230, ffffb2082ba56210, 990fe8c0}Probably caused by : memory_corruption ( nt!MmPurgeSection+10ac14 )
Code:
BugCheck 1A, {41792, fffff9016dc00230, 10000000, 0}*** WARNING: Unable to verify timestamp for win32k.sys*** ERROR: Module load completed but symbols could not be loaded for win32k.sysProbably caused by : memory_corruption ( ONE_BIT )
Code:
BugCheck 109, {a3a024da4d1b6536, 0, 570ddec0b883ead7, 101}Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Code:
ffffbd80`cb3e1058 fffff804`b56354b3Unable to load image \SystemRoot\System32\Drivers\dump_iaStorAV.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for dump_iaStorAV.sys*** ERROR: Module load completed but symbols could not be loaded for dump_iaStorAV.sys dump_iaStorAV+0x754b3
Code:
ffffbd00`8e86e6d8 fffff802`27e7c2b8Unable to load image \SystemRoot\System32\Drivers\dump_iaStorAV.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for dump_iaStorAV.sys*** ERROR: Module load completed but symbols could not be loaded for dump_iaStorAV.sys dump_iaStorAV+0x7c2b8
Code:
BugCheck 1A, {41792, fffff1000002f330, 10000000, 0}Probably caused by : memory_corruption ( ONE_BIT )
Code:
ffff8f80`12979028 fffff80d`bb58df57Unable to load image \SystemRoot\System32\Drivers\dump_iaStorAV.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for dump_iaStorAV.sys*** ERROR: Module load completed but symbols could not be loaded for dump_iaStorAV.sys dump_iaStorAV+0x7df57
Code:
BugCheck 3B, {c0000005, fffff802f5059061, ffff8f801297a720, 0}Probably caused by : memory_corruption
Code:
ffff8001`7965e6c8 fffff80f`8110c018Unable to load image \SystemRoot\System32\Drivers\dump_iaStorAV.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for dump_iaStorAV.sys*** ERROR: Module load completed but symbols could not be loaded for dump_iaStorAV.sys dump_iaStorAV+0x7c018
Code:
BugCheck 1A, {41793, ffff9c8000019230, 4, 3}Probably caused by : memory_corruption
Code:
BugCheck 1A, {41792, ffff8080f4409330, 10000000, 0}Probably caused by : memory_corruption ( ONE_BIT )
Code:
BugCheck 1A, {41792, ffffe3bffd45b230, 10000000, 0}*** WARNING: Unable to verify timestamp for win32k.sys*** ERROR: Module load completed but symbols could not be loaded for win32k.sysProbably caused by : memory_corruption ( ONE_BIT )
Code:
BugCheck 1A, {41792, ffffe180b020d330, 10000000, 0}Probably caused by : memory_corruption ( ONE_BIT )
Code:
BugCheck 1A, {41792, ffffee3ffe92e330, 10000000, 0}Probably caused by : memory_corruption
Code:
BugCheck 1A, {41792, fffffe00c76f7330, 10000000, 0}Probably caused by : memory_corruption ( ONE_BIT )