Windows 10: (critical process died) BSOD / freezes and crashes Solved

Page 2 of 9 FirstFirst 1234 ... LastLast
  1.    27 Jan 2017 #11

    Ive installed a new copy of windows as said many times, so there isn't much... I did however install google chrome AFTER getting 20 crashes and bsod, as for one reboot the system was stable so I wanted to stress test it. And it shortly after crashed

    I tried following the instructions in the link you sent, however when I upload a photo the page just crashes. So ill type out whats shown

    AMD Radeon Settings
    Google Chrome
    Microsoft Visual C++ 2013 Redistributable (x64)
    Microsoft Visual C++ 2013 Redistributable (x86)
      My ComputerSystem Spec


  2. Posts : 10,532
    Windows 10 Pro and Windows 10 Pro Insider
       27 Jan 2017 #12

    Is your Windows update working? Try going to settings > Update and Security > Update History and see what updates you have installed.
      My ComputersSystem Spec

  3.    27 Jan 2017 #13

    essenbe said: View Post
    Is your Windows update working? Try going to settings > Update and Security > Update History and see what updates you have installed.
    Windows updates cant work if the system crashes on start or shorty after start.
    If you like I can try reinstalling windows agian with a new usb install.
      My ComputerSystem Spec


  4. Posts : 10,532
    Windows 10 Pro and Windows 10 Pro Insider
       27 Jan 2017 #14

    Where did you download the ISO File. Try downloading again from here Windows ISO Download
      My ComputersSystem Spec

  5.    27 Jan 2017 #15

    I used the Microsoft windows 10 USB creation tool. Now that I am downloading the ISO, what should I use to create the USB tool, any usb iso burner for example like Rufus?
      My ComputerSystem Spec


  6. Posts : 10,532
    Windows 10 Pro and Windows 10 Pro Insider
       27 Jan 2017 #16
      My ComputersSystem Spec

  7.    27 Jan 2017 #17

    Thats what I use normally on all my installations. Ill try the ISO this time.
      My ComputerSystem Spec


  • Posts : 10,532
    Windows 10 Pro and Windows 10 Pro Insider
       27 Jan 2017 #18

    Try a clean install and install nothing at all and see if you get BSODs. I would think, if you do, it is a good chance of a hardware problem.
      My ComputersSystem Spec

  •    27 Jan 2017 #19

    essenbe said: View Post
    Try a clean install and install nothing at all and see if you get BSODs. I would think, if you do, it is a good chance of a hardware problem.
    Just did the usb install, after it finished installation it hanged on the "Hi" screen for 10+ mins. Clearly a hardware problem. I tested the system with another working GPU but it still crashes. Ran a mem86 test and it passed. Did a clean wipe and fresh install on a new hard drive and that didnt work. So either a CPU or MB problem. Are you able to determine the culprit from the BSOD reports? So I can get a new cpu/or mb to test.
      My ComputerSystem Spec


  • Posts : 10,532
    Windows 10 Pro and Windows 10 Pro Insider
       27 Jan 2017 #20

    No, I seriously doubt it. Try memtest86+ again. It must run for 8 complete passes in order to work. ttry it this way. Your system specs show 16GB of ram. It will take around 18 hours to run 8 passes. Also, if you can, please take a picture of the screen and upload it just before you shut it down. If you get an error before the 8 passes, you can stop the test right then. Even 1 error is a failure.

    Please Run Memtest86+

    information   Information
    Please download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
    Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you may have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask
      My ComputersSystem Spec


  •  
    Page 2 of 9 FirstFirst 1234 ... LastLast

    Related Threads
    Solved BSOD - Critical process died in BSOD Crashes and Debugging
    Hey, as who ever read this all ready know, I got a BSOD issue. I have a "critical process died" error whenever I start my computer. I have tried starting the computer in safe mode without any success and I have also tried to reinstall windows 10,...
    [BSOD]Critical Process Died in BSOD Crashes and Debugging
    Hello, sorry for my bad english its not my official language, Recently i has been getting this problem, mostly when i play games appears the blue screen and the pc reset itself,This are the specifications of my pc: Dual Core E5700 3.00GHZ...
    win 10 BSOD - Critical process died. in BSOD Crashes and Debugging
    Hi. looking for help. Using as an IT support/general office machine. Get BSOD 4-6 times daily. As yet to determine what is causing. Have been removing software after each BSOD. Win 10 Pro on Dell OptiPlex 380. Upgraded to 8gb mem and...
    Help Please: BSOD Critical Process Died in BSOD Crashes and Debugging
    My laptop is Leveno running Window 10. I got BSOD a lot recently, sometimes while using the laptop surfing on the Internet and sometimes activating it from standby. The errors I got were Critical Process Died, 000021a, and kernel error I have...
    Loading Dump File Kernel Bitmap Dump File: Kernel address space is available, User address space may not be available. ************* Symbol Path validation summary ************** Response Time (ms) Location...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 12:37.
    Find Us