Just got this BSOD awhile ago PFN_LIST_CORRUPT


  1. Posts : 434
    10
       #1

    Just got this BSOD awhile ago PFN_LIST_CORRUPT


    So upon getting this I ran Who crashed and got this

    On Tue 8/9/2016 9:24:57 PM GMT your computer crashed
    crash dump file: C:\WINDOWS\Minidump\080916-18015-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt+0x149F90)
    Bugcheck code: 0x4E (0x99, 0x2B83F3, 0x0, 0xA00000000302773)
    Error: PFN_LIST_CORRUPT
    file path: C:\WINDOWS\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    description: NT Kernel & System
    Bug check description: This indicates that the page frame number (PFN) list is corrupted.
    This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
    The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

    Can someone help?
      My Computer


  2. Posts : 434
    10
    Thread Starter
       #2

    BTW if anyone wants the Windbg Analaysis

      My Computer


  3. Posts : 14,046
    Windows 11 Pro X64 22H2 22621.1848
       #3

    Please read and follow the instructions here: Blue Screen of Death (BSOD) Posting Instructions

    You windbg trace does show memory_corruption so I would start by testing your PC memory:
    ===================================================
    RAM:


    Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

    Information


    MemTest86+
    is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses


    Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    Warning
    MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.

    If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note
    MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.

    Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:49.
Find Us




Windows 10 Forums