Multiple BSOD errors over a long period!

Vaseem128 · 03 Jun 2016

I have received multiple BSOD errors on my PC over a prolonged period of time and am hoping someone can finally help to resolve these.

They occur regularly on my PC and vary from once a day to 5-10 times a day.
I usually have multiple pages open on either Microsoft Edge Browser or Mozilla Firefox but nothing else.

If someone can have a look at the attached debug file which I have pulled off to advise and offer any assistance that would be great.

1337comet · 03 Jun 2016

I don't work here but I would personally verify drivers from the manufacturers, as well as the graphics card. I just got done addressing a similar issue and it turned out to be a combination of hardware (i had a memory module go bad) and a driver didn't wanna update automatically.

That a gfx card from an old build? :P Oh I can tell you now as well they will want you to update your system specs that are shown in the drop down menu. GOOD LUCK!!! AXEO is awesome!!!

axe0 · 03 Jun 2016

@1337comet, do you mean work as in paid work or as in volunteer work?
@Vaseem128, please upload a new zip file, the attached zip file is empty.

Vaseem128 · 06 Jun 2016

@axe0 Thanks for the reply. I have uploaded a new dump file and attached to this message. The computer crashed twice already today with a Non Page Fault! Your assistance would be greatly appreciated.

@1337comet Thanks for the advice I will get looking at the drivers and graphics card :)

axe0 · 06 Jun 2016

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.

Warning

Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

An easy way to get rid of the drivers is using a system restore point prior the use of it.

Please update the BIOS to the most recent version 2501
P8Z77-V LX | Moederbord | ASUS Nederland

If any overclock for the CPU, GPU and RAM is present, please remove it while troubleshooting as it may cause problems when a system is unstable.

Code:

CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
MaxSpeed:     3400
CurrentSpeed: 3503

Please uninstall Trusteer & Bitdefender temporary and use Windows Defender as alternative.
Using more than 1 Anti-Virus causes problems for system performance and stability, for these reasons it is recommended that you use 1 AV at a time.
If you have activation credentials for both Trusteer & Bitdefender, I'm sorry but you have to drop either of them on your system if you're planning on installing either again after troubleshooting.
Uninstalling Rapport using the SafeUninstall Utility | Trusteer
How to uninstall Bitdefender 2016

Code:

ffffd000`22d90c18  fffff801`db523efdUnable to load image \??\C:\Program Files (x86)\Trusteer\Rapport\bin\x64\RapportPG64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for RapportPG64.sys
*** ERROR: Module load completed but symbols could not be loaded for RapportPG64.sys
 RapportPG64+0x23efd

ffffd000`22aea528  fffff801`36564461Unable to load image \SystemRoot\system32\DRIVERS\avc3.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avc3.sys
*** ERROR: Module load completed but symbols could not be loaded for avc3.sys
 avc3+0x14461

This is important to note, if above suggestions do not improve stability we may need to take tests for hardware.

Code:

BugCheck 3B, {c0000005, fffff8037d41378f, ffffd00027422b90, 0}

Probably caused by : hardware ( nt!ObpLookupObjectName+86f )


BugCheck 3B, {c000001d, fffff8008c109b4a, ffffd0002632ee00, 0}

Probably caused by : hardware ( win32kfull!_PostTransformableMessageExtended+296 )


BugCheck 50, {ffffffff85c6143a, 2, fffff8020087ff84, 2}

Could not read faulting driver name
Probably caused by : hardware ( nt!SeAccessCheckWithHint+3e4 )

BugCheck 1000007E, {ffffffffc0000005, fffff801735f9e8e, ffffd0002300d388, ffffd0002300cba0}

Probably caused by : FLTMGR.SYS ( FLTMGR!TreeUnlinkMulti+4e )