1. Joined : Jun 2016
    Posts : 2
    Windows 10 64 Bit
       03 Jun 2016 #1

    Multiple BSOD errors over a long period!


    I have received multiple BSOD errors on my PC over a prolonged period of time and am hoping someone can finally help to resolve these.

    They occur regularly on my PC and vary from once a day to 5-10 times a day.
    I usually have multiple pages open on either Microsoft Edge Browser or Mozilla Firefox but nothing else.

    If someone can have a look at the attached debug file which I have pulled off to advise and offer any assistance that would be great.
      My System SpecsSystem Spec


  2. Joined : May 2016
    Posts : 25
    Microsoft Windows 10 Pro 64-bit 10586 Multiprocessor Free
       03 Jun 2016 #2

    I don't work here but I would personally verify drivers from the manufacturers, as well as the graphics card. I just got done addressing a similar issue and it turned out to be a combination of hardware (i had a memory module go bad) and a driver didn't wanna update automatically.

    That a gfx card from an old build? :P Oh I can tell you now as well they will want you to update your system specs that are shown in the drop down menu. GOOD LUCK!!! AXEO is awesome!!!
      My System SpecsSystem Spec


  3. Joined : Jun 2015
    Posts : 10,902
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       03 Jun 2016 #3

    @1337comet, do you mean work as in paid work or as in volunteer work?
    @Vaseem128, please upload a new zip file, the attached zip file is empty.
      My System SpecsSystem Spec


  4. Joined : Jun 2016
    Posts : 2
    Windows 10 64 Bit
       06 Jun 2016 #4

    Multiple BSOD errors over a long period!


    @axe0 Thanks for the reply. I have uploaded a new dump file and attached to this message. The computer crashed twice already today with a Non Page Fault! Your assistance would be greatly appreciated.

    @1337comet Thanks for the advice I will get looking at the drivers and graphics card
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 10,902
    Windows 10 Pro / Windows 10 TP / Windows 8.1 Pro / Windows 7 Pro
       06 Jun 2016 #5

    Please remove / disable items from the startup in taskmanager
    These programs could interfere with the boot process giving you trouble and increase the boot time.

    warning   Warning
    Programs that claim to update your drivers install either the wrong or corrupted drivers.
    If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

    An easy way to get rid of the drivers is using a system restore point prior the use of it.

    Please update the BIOS to the most recent version 2501
    P8Z77-V LX | Moederbord | ASUS Nederland


    If any overclock for the CPU, GPU and RAM is present, please remove it while troubleshooting as it may cause problems when a system is unstable.
    Code:
    CPUID:        "Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz"
    MaxSpeed:     3400
    CurrentSpeed: 3503
    Please uninstall Trusteer & Bitdefender temporary and use Windows Defender as alternative.
    Using more than 1 Anti-Virus causes problems for system performance and stability, for these reasons it is recommended that you use 1 AV at a time.
    If you have activation credentials for both Trusteer & Bitdefender, I'm sorry but you have to drop either of them on your system if you're planning on installing either again after troubleshooting.
    Uninstalling Rapport using the SafeUninstall Utility | Trusteer
    How to uninstall Bitdefender 2016
    Code:
    ffffd000`22d90c18  fffff801`db523efdUnable to load image \??\C:\Program Files (x86)\Trusteer\Rapport\bin\x64\RapportPG64.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for RapportPG64.sys
    *** ERROR: Module load completed but symbols could not be loaded for RapportPG64.sys
     RapportPG64+0x23efd
    
    ffffd000`22aea528  fffff801`36564461Unable to load image \SystemRoot\system32\DRIVERS\avc3.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for avc3.sys
    *** ERROR: Module load completed but symbols could not be loaded for avc3.sys
     avc3+0x14461

    This is important to note, if above suggestions do not improve stability we may need to take tests for hardware.
    Code:
    BugCheck 3B, {c0000005, fffff8037d41378f, ffffd00027422b90, 0}
    
    Probably caused by : hardware ( nt!ObpLookupObjectName+86f )
    
    
    BugCheck 3B, {c000001d, fffff8008c109b4a, ffffd0002632ee00, 0}
    
    Probably caused by : hardware ( win32kfull!_PostTransformableMessageExtended+296 )
    
    
    BugCheck 50, {ffffffff85c6143a, 2, fffff8020087ff84, 2}
    
    Could not read faulting driver name
    Probably caused by : hardware ( nt!SeAccessCheckWithHint+3e4 )
    
    BugCheck 1000007E, {ffffffffc0000005, fffff801735f9e8e, ffffd0002300d388, ffffd0002300cba0}
    
    Probably caused by : FLTMGR.SYS ( FLTMGR!TreeUnlinkMulti+4e )
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Multiple BSOD errors
I'm getting random BSOD errors from three different files every few days or so. fwpkclnt.sys/ntoskrnl.exe/tcpip.sys They seem to happen at random times.
BSOD Crashes and Debugging
Solved Intel Nuc BSOD multiple errors
Hi All I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram. Windows 10 is a fresh purchase and install downloaded direct from MS. The Nuc worked fine with both...
BSOD Crashes and Debugging
Mouse and keyboard stop working after long period of pc being shutdown
I have read multiple threads from this website and others with no real answer on how to fix this issue, so I apologize for starting another thread about it. The web is littered with so many people still having this issue... I just recently...
Drivers and Hardware
Multiple Constant BSOD Errors
Every time I boot up my PC I get constant BSOD errors stretching from KMODE_EXEPTION_NOT_HANDLED to SYSTYM_SERVICE_EXEPTION, CRITICAL_STRUCTURE_CORRUPTION and countless others, if you can please help me, my file is attached.
BSOD Crashes and Debugging
multiple BSOD errors even just from startup
We started with basically hourly BSODs. We had a different processor in the computer and it ran fine for several hours, possibly overnight. That's how we found out it was the processor itself, and replaced it. Now, we are still getting...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:06.
Find Us
Twitter Facebook Google+



Windows 10 Forums