New
#11
Okay, I finally got it to BSOD, while on Netflix and with Skype open. I had been playing several Steam and B.Net games prior to watching Netflix.
I don't know if there is a special dump location for driver verifier, but I have attached the latest dump that Windows generated normally. Please get back to me ASAP so we can solve this once and for all!
To note, with driver verifier it happens that sometimes no driver is being flagged, usually with a good reason which I'm trying to figure out.
The 0x1A looks to be either a memory or hard drive problem, but I think it is a little hard to believe because there are 6 days between the previous crash.
What happened is that the memory management tried to transfer memory to the virtual memory (page file), this went wrong (pagefault).
Memory management attempts to handle the pagefault.
The memory where the pagefault occured on is filled with zeros.
There is an attempt to use the zeroed memory what causes the bluescreen.
Even though I find it a little hard to believe that either of the memory and hard drive are causing problems, I would still like to rule them out.Code:1: kd> k Child-SP RetAddr Call Site ffffd000`300ac7a8 fffff800`1dff8d6a nt!KeBugCheckEx ffffd000`300ac7b0 fffff800`1dec4a68 nt! ?? ::FNODOBFM::`string'+0x1e46a ffffd000`300ac810 fffff800`1dec2e32 nt!MiZeroFault+0xfd8 ffffd000`300ac990 fffff800`1dfd51bc nt!MmAccessFault+0x2e2 ffffd000`300acb00 00000000`61f94239 nt!KiPageFault+0x13c 00000000`0e0fee94 00000000`00000000 0x61f94239
Please run below tests.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
- Short Drive Self Test
- Short generic
- Long generic
If the short generic fails, no need for the long generic.
NoteDo not run SeaTools on an SSD as the results will be invalid.
Run chkdsk
Disk Check - Windows 7 Help Forums
Run HDTune to
- scan for errors, no quick scan but full scan
- check the health,
- benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs:
Last edited by axe0; 17 Jan 2016 at 10:51.
Thank you for responding. I will do these tests and get back to you. In the meantime, I have attached a dump of a BSOD I got this morning after turning Driver Verifier off, if it helps at all.
What should my page file settings look like? I have "Automatically manage paging file size for all drives" checked currently.
UPDATE:
- I ran all 3 tests with SeaTools, all passed.
- I tried running the disk check from File Explorer but the options are a lot more limited than on Windows 7. It passed. Then I ran "chkdsk C: /f" from an elevated command prompt, but it would only let me do it on startup. It didn't error out or really tell me anything so I guess it worked.
- I ran all the HD Tune Pro tests you wanted:
https://i.imgur.com/ECrqTGB.png
It also BSOD'd randomly during the long Seagate test. I have the dump if you wanna see it.
I ran Memtest and I got errors immediately. I am testing individual sticks right now and will get back to you. Thank you for suggesting that I try this step!
Okay so I tried different stick and slot combinations, and the sticks/slots pass 8 times when only one is in at a time, but any slot combo with both sticks produces errors. Dual channel produces errors immediately on the first test, and non dual channel produces errors on the 9th test (random values).
Do you have any idea what the exact issue could be, and/or what step I should take next?
http://www.corsair.com/en-ca/vengean...z8gx3m2a1600c9
1600MHz, 1.50v, 4 gb each
Please run CPU-Z | Softwares | CPUID, open it and make screenshots of the following tabs
- CPU
- Mainboard
- Memory
- SPD*
- Graphics
*SPD shows the details of each module, you can show the details by choosing different slots in the left upper corner.
Please make screenshots of each module.
Please post each screenshot in your next reply/replies.