Page 1 of 8 123 ... LastLast
  1.    02 Oct 2015 #1
    Join Date : Oct 2015
    Posts : 39
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free

    BOSD 7 times today, either while using Chrome or right after boot up


    As the title says, I've gotten the BOSD 7 times today. The BOSD said it was because of various things throughout the day, at first it said it was Memory Management, but after that I just started to get annoyed. Checking back through the event logs, the bugcheck says the errors were: 0x00000050; 0x000000ef ; 0x0000001a; 0x0000000a; 0x00000139; 0x000000c1
    If it isn't obvious, I really don't know how to solve this or if the bugcheck errors help at all. What I do know is that I was just using google chrome when some of the crashes happened. Also during the day, several times I booted up my computer and logged in and then went away for 5 minutes after logging in (without doing anything). When I came back, it was obvious that my computer had restarted.

    I guess I can survive with my computer crashing randomly, but if anyone could help, it'd be greatly appreciated.
      My ComputerSystem Spec
  2.    04 Oct 2015 #2
    Join Date : Jun 2015
    Posts : 12,712
    Windows 10 Pro

    Hi Yargblarg,

    Welcome to the 10forums.

    Some crashes might be related to each other.
    The 0x1a(memory_management) is either caused by a driver or bad memory.
    Seeing from the other errors that some have also a bad memory as 1 of the usual causes, we need to check the memory.



    BOSD 7 times today, either while using Chrome or right after boot up Diagnostic Test BOSD 7 times today, either while using Chrome or right after boot up
     RAM TEST

    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note


    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
      My ComputersSystem Spec
  3.    05 Oct 2015 #3
    Join Date : Oct 2015
    Posts : 39
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    Thank you for helping me with this issue. I ran the tests last night, I only was able to do 7 passes, but on the 2nd pass there was a memory error. I can give you the specific errors if needed, but I read through that thread you linked to and it sounds like since i have 3 sticks of 2gb ram, I'm going to have to run this program again with each individual piece of RAM in each individual DIMM slot for a total of 9 tests... ugh

    It makes sense that its a memory error because sometimes chrome crashes because of some memory error or something. Also, funny enough, since i made my first post, my computer didn't have any BSOD's, but once i booted it up to respond to this thread, it had another BSOD with "Faulty hardware" or something.

    Also, since my computer has 6 DIMM slots, do i have to test the unused slots?

    Also, I just got 3 more BSOD's today after posting this (which is why I'm adding it). The first one happened while I was listening to spotify and playing some Asphalt 8. Sometimes when I restart a race in Asphalt 8, it crashes, but this time my computer got a BSOD that said "PAGE_FAULT_IN_NONPAGED_AREA". So, I restarted my computer, logged in, opened chrome and asphalt 8, and I got another BSOD. This time, it said "DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_AREA". So, I rebooted my computer, logged in and let it sit for two minutes to load this time, and then it got the same BSOD as last time. Now its working fine (fingers crossed). I don't know if this information helps at all, but I thought I'd bring it up because its part of the ongoing BSOD issue.
    Last edited by Yargblarg; 05 Oct 2015 at 17:28.
      My ComputerSystem Spec
  4.    06 Oct 2015 #4
    Join Date : Jun 2015
    Posts : 12,712
    Windows 10 Pro

    I would first test the used slots, that is more then enough work.

    If I am correct, those crashes have memory as a cause.
      My ComputersSystem Spec
  5.    12 Oct 2015 #5
    Join Date : Oct 2015
    Posts : 39
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    So I've spent the past week running tests on my computer, and the results are quite surprising. I ran a test for each stick of ram in each of the three DIMM slots that I use on my motherboard, and I only got errors for the second stick of RAM in the second DIMM slot, but not in any other of the tests:
    Attachment 42452
    Also, I just retested the second stick of RAM in the second DIMM slot and it came up with no errors, even after 13 passes. I must admit I am thoroughly confused as to what the issue is. So, what would you recommend that I do?
      My ComputerSystem Spec
  6.    12 Oct 2015 #6
    Join Date : Jun 2015
    Posts : 12,712
    Windows 10 Pro

    Check the BIOS for the RAM frequency and make sure it is supported by the motherboard.
      My ComputersSystem Spec
  7.    12 Oct 2015 #7
    Join Date : Oct 2015
    Posts : 39
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    So here are two pictures, one of the advanced bios settings on my computer and the other being one of my sticks of ram. In case you can't see what they say, the bios says that the RAM is operating at 1066Mhz and a "Profile DDR Voltage" of 1.5V. My RAM on the other hand operates (or can operate up to) 1333 Mhz @ 1.65v. My processor is an i7 950 that can operate RAM up to a frequency of 1066 Mhz and my motherboard operate RAM at both 1333 and 1066 Mhz, among other frequencies.

    I'm wondering if either the change in voltage (1.5v vs 1.65v) or the difference in operating frequency (1066 Mhz vs 1333 Mhz) is causing the problem.

    My motherboard: GIGABYTE - Motherboard - Socket 1366 - GA-X58A-UD3R (rev. 2.0)

    My processor: Intel QPI) Specifications
    My RAM (i couldn't find the manufacturers website): OCZ Gold 6GB Triple Channel Kit Desktop Memory Model OCZ3G1333LV6GK - Newegg.com
      My ComputerSystem Spec
  8.    12 Oct 2015 #8
    Join Date : Jun 2015
    Posts : 12,712
    Windows 10 Pro

    Lets first check the frequency, please set it to 1333 MHz
      My ComputersSystem Spec
  9.    12 Oct 2015 #9
    Join Date : Oct 2015
    Posts : 39
    Microsoft Windows 10 Home 64-bit 10240 Multiprocessor Free
    Thread Starter

    So I've now set it to 1333 Mhz (which I don't think is supported by my processor) and my computer got another BSOD, but anyway, what should I do now that my RAM is at the higher frequency?
    Last edited by Yargblarg; 12 Oct 2015 at 20:55.
      My ComputerSystem Spec
  10.    13 Oct 2015 #10
    Join Date : Jun 2015
    Posts : 12,712
    Windows 10 Pro

    Set the frequency back to what it was and make sure the contacts of the modules are clean.
      My ComputersSystem Spec

 
Page 1 of 8 123 ... LastLast


Similar Threads
Thread Forum
Solved I downloaded a New Google Chrome Browser today
..and my TenForums TUTORIALs are visible again. I am able to see them and all may be normal again... still checking and thanks for all your previous comments. all be safe.
Browsers and Email
Chrome improvements for a faster and more efficient web - Chrome 45
Speed is one of the founding principles of Chrome. As the web evolves and sites take advantage of increasing capabilities, Chrome’s performance—how fast pages load, how smooth scrolling is, how much memory is consumed, and how long your battery...
Browsers and Email
Open Files Disappear When I Open Chrome, Chrome Disappears When I Open
Hi, I just updated to W10. If I open several files/documents I get the icon in the taskbar (the bar at the bottom of the page), hover over it and see the documents that are open. I then open Chrome and the Chrome icon appears in the taskbar and...
General Support
BSOD at random times i thought it was chrome.
hi please see attached .zip as requested in forum rules I have also had the same reference by pointer BSOD in 8.1 I thought upgrading to windows 10 would get rid of it. after this post I'm booting up to BIOS and running a memory check in case...
BSOD Crashes and Debugging
New Chrome - Google Chrome 42.0.2311.90 (Official Build) m (64-bit)
Anyone upgrading to the new Chrome stable build 42.0.2311.90 and would like to revert back to the standard Bookmark Manager, here is how.... Type about:flags in search bar, press enter. Disable flag: Enable Enhanced BookmarksMac, Windows,...
Browsers and Email
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:42.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums