Can't boot Windows 10 installation from USB

You've confirmed the Nvidia driver problem related to Windows 10 2004?
https://docs.microsoft.com/en-us/win...indows-10-2004
https://docs.microsoft.com/en-us/win...indows-10-2004
Did you choose to remain in safe mode using the Microsoft display driver?

I'm running in normal mode. I just uninstalled the display driver and
it seems to be running ok. I just need to keep checking to see when
they have a fix for these
Known and Resolved issues for Windows 10 May 2020 Update version 2004


Issue with older drivers for Nvidia display adapters (GPU)
You might have issues if you are using an Nvidia display adapter (GPU) and drivers with a version below 358.00.

Please upload a new V2.
If possible please maintain one link in the thread.

How come the computer is still in safe mode?

Code:

Safe Mode    : Fail-safe with network boot

Code:

---------------
Display Devices
---------------
           Card name: Microsoft Basic Display Driver
        Manufacturer: (Standard display types)
           Chip type: NVIDIA
            DAC type: NVIDIA Corporation

Can you place the computer into normal boot?

Were there unexpected shutdowns or restarts while in safe mode?

The computer has dual graphics with integrated Intel GPU.

Check these are for settings: BIOS, device manager, Nvidia control panel
Turn off Nvidia GPU or detach / remove the Nvidia GPU card.

Are you making free Macrium images?

Windows module installer is related to attempted Windows updates.
Some have failed.

The logs were cleaned.
They now start on 8/9.
Please make sure that there is no further cleaning so the logs can be scanned.

Report into the thread any time you have to power off the computer.
Report into the thread any time there is an unexpected shutdown or restart.

For any BSOD:

a) run the V2 log collector to collect new log files

b) open file explorer> this PC > C: > in the right upper corner search for: C:\Windows\memory.dmp
> if the file size is < 1.5 GB then zip > post a separate share link into the thread using one drive, drop box, or google drive

Computer's should not have unexpected shutdowns and restarts, especially in safe mode.
This typically indicates malfunctioning hardware.

Open device manager > click view > click show hidden files > expand display adapters > post images into the thread
Open Nvidia control panel > post images into the thread

Look for menu options to turn off Nvidia dGPU and turn on Intel iGPU.


Choose one of the temperature monitoring software applications: Speecy, HW monitor, Speed fan:
Speccy - Free Download - Piriform: Speccy - System Information - Free
Download Speccy | Find your computer specs, free!
Download Speccy | Find your computer specs, free!
HWMONITOR | Softwares | CPUID: HWMONITOR | Softwares | CPUID
HWMONITOR | Softwares | CPUID
SpeedFan - Access temperature sensor in your computer: SpeedFan - Access temperature sensor in your computer
SpeedFan - Access temperature sensor in your computer

Run memtest86+ version 5.01 for at least 8 passes.
Memtest86+ - Advanced Memory Diagnostic Tool
This may take hours so plan to run it overnight.

a) Please make sure you use the Memtest86+ version 5.01 or 5.32b with the link below.
Memtest86+ - Advanced Memory Diagnostic Tool

The testing is done not by time but by passes.
The more passes the better the testing conditions.
There are a significant number of false negatives if fewer than 8 passes are made.
A false negative is a test pass when there is malfunctioning RAM.
There is 16 GB of RAM on the computer.
Memtest86+ version 5.01 or 5.31b testing takes approximately 1 - 2 hours /GB RAM
Just 1 error is a fail and you can abort testing.
Then test 1 RAM module at a time in the same DIMM each for 8 or more passes.

b) When Memtest86+ version 5.01 has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.
https://answers.microsoft.com/en-us/...f-ecc7b7ff6461
MemTest86+ - Test RAM


Run HD Tune (free version) (all drives)
HD Tune website
Post images into the thread for results on these tabs:
a) Health
b) Benchmark
c) Full error scan

Run Sea Tools for Windows
long generic test
Post an image of the test result into the thread
SeaTools for Windows |
Seagate
http://knowledge.seagate.com/article...S/FAQ/202435en

Run Intel Processor Diagnostic Tool (IPDT):
Post images into the thread
https://downloadcenter.intel.com/dow...iagnostic-Tool


Run Prime95 - Stress Test Your CPU
Prime95 - Stress Test Your CPU Windows 10 Performance Maintenance Tutorials
Prime95 - Stress Test Your CPU
a) Record the maximum temperature and post the maximum temperature into the thread
b) Record test duration and post the uninterrupted test duration into the thread
c) Aim for testing > 3 hrs and abort testing as needed for freezing, temperature changes (see link)
d) Use the Microsoft snipping tool to post images into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10


Run FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials
FurMark - GPU Stress Test Windows 10 Performance Maintenance Tutorials:
FurMark - GPU Stress Test
Please make note of the importance of temperature monitoring and aborting the test in the GPU link.
a) Record the maximum temperature and post the maximum temperature into the thread.
b) Record the test duration and post the uninterrupted test duration into the thread.
c) Aim for testing 1 hour.
d) Use the Microsoft snipping tool to post images into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10

Run OCCT:
https://www.ocbase.com/


These steps / tests can be performed overnight:
a) HD tune full error scan
b) Sea Tools for Windows long generic test
c) Memtest86+ version 5.01 or 5.31b (plan 1 - 2 hrs / GB RAM)

How about the Windows Module Installer? How can I disable this from creating restore points?

When I help people the logs are used and you're always deleting them.
So I'm handicapped.
For help please don't delete the information.
For the Widows problem you can open a new thread reporting failed windows 2004 updates while in safe mode creating new restore points (module installer).
The logs had the error codes and you've deleted them.

OK Thanks I will start a new thread. I thought I was
supposed to delete them after they had been read
sorry about that. I'm not going run anymore tests for
hardware or driver problems. I'm going to wait for
a NVIDIA fix or buy a new PC.

I appreciate all your help, I just don't think at this
time it will resolve my driver issue.