New
#1
BSOD Win 10 Help
Hey i got BSOD sometime and other time PC Just Close and Reopen by it self .
Thx to Help me to fix that
(sorry for me English i am a French guy )
Hey i got BSOD sometime and other time PC Just Close and Reopen by it self .
Thx to Help me to fix that
(sorry for me English i am a French guy )
The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.
WarningIf you're overclocking your system, revert back to stock clocks now.
NoteTest the system once the overclock is removed before continuing with the steps outlined below.
Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test
Run Prime95 and/or IntelBurenTestto stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums
WarningYour CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.
Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums
Note
MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.
Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
Run following tests
- Short Drive Self Test
- Short generic
- Long generic
If the short generic fails, no need for the long generic.
NoteDo not run SeaTools on an SSD as the results will be invalid.
Run chkdsk
Disk Check - Windows 7 Help Forums
Run HDTune to
- scan for errors, no quick scan but full scan
- check the health,
- benchmark.
It may take some time, but please take the time you need to perform it properly.
Let me know what the results are
- of the error scan,
- make a screenshot of the health of every hard drive and post the screenshots,
- post screenshots with the benchmark of the
- transfer rate,
- access time,
- burst rate,
- cpu usage.
Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums
NoteRun Furmark for around 30 minutes.
WarningYour GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.How to fill in your system specs: