Page 2 of 2 FirstFirst 12
  1.    10 Oct 2017 #11
    Join Date : Jul 2017
    Posts : 183
    Windows 10 Home

    Quote Originally Posted by noels7 View Post
    bo elam, you might also be correct in that Windows uninstalled it and as MS is prone to do: only half did the job and left remnants of KB4038788 behind in Settings - Update History.
    I dont see what we see in Settings>Update History as remnants, I see it as History. History of updates that got installed. Look at mine, it goes all the way back to July, there are a few that dont fit in the picture but it goes back to when I upgraded to CU.

    Click image for larger version. 

Name:	Sin título.jpg 
Views:	1 
Size:	153.9 KB 
ID:	157447

    Bo
      My ComputerSystem Spec
  2.    11 Oct 2017 #12
    Join Date : Oct 2017
    Posts : 1
    windows 10

    Hi,

    I also experienced a problem with Lockheed Martin P3D v. 3.3 as a consequence of update KB4038788.

    I could not load my flightsim and later learned many others had similar problems. That was about 3 weeks ago. I reported the issue to Microsoft but as yet they have failed to correct it. Luckily I found a tip on the LM forum which I can use to get the sim up and running. It may not work for everyone!

    Anyway that is no excuse for system crashing due to "faulty" updates or indeed for such a waiting time to put the matter right.

    Updates are forced upon users with no simple means of permanently deleting them. I would urge Microsoft to take a more urgent view of such matters reported to them by users. I detect their is some anxiety about numerous updates causing a variety of serious issues.

    Microsoft please note. Thank you.

    Regards
      My ComputerSystem Spec
  3.    11 Oct 2017 #13
    Join Date : Oct 2017
    Posts : 436
    Windows 10 Pro 64-bit

    Quote Originally Posted by noels7 View Post
    Freebooter and bo elam

    Many thanks to both of you for your assistance.
    Freebooter, in your reply to my last post you included the following:

    You can also execute the wusa.exe /uninstall /kb:4038788 without /quiet switch to view the result of the command.
    Without the /quiet switch I have a result which actually says that KB4038788 is not even installed although it was in
    Update History. I have removed that entry in Settings -Update History which leads to the question should I download
    manually KB4038788 and install even though my check for updates updated only today's release KB4041676.

    bo elam, you might also be correct in that Windows uninstalled it and as MS is prone to do: only half did the job and left remnants of KB4038788 behind in Settings - Update History.

    Now to discover why Update Status always shows a date of 9/11/2017, 7:00 AM

    Noel Southam
    noels7
    I thought you wanted to uninstall KB4038788 update if you want to reinstall it try doing it manually.
      My ComputerSystem Spec
  4.    11 Oct 2017 #14
    Join Date : Oct 2017
    Posts : 2
    Windows 10

    Hello
    I am experiencing the same repetitive problem as the rest of the people on this forum. Windows update KB4038788 causes Lockheed Martin P3D V3.4.9 to constantly CTD when the loading is 100% complete just before loading into the game. I have tried an enormous amount of potential fixes. First I tried to reinstall what i thought was the troublesome addon to no success. Second I reinstalled the simconnect platform multiple times. Third I downgraded to an older version of the flightsim (V3.4.14) again no success. And finally I have come across people having problems with KB4038788 and i tried to uninstall the update. However the very annoying part comes now as I attempted to uninstall the update for it to only say An error has occurred. Not all of the updates were successfully uninstalled. I tried many fixes to this none of them have worked and I finally tries the CMD solution posted on this form only for it to give error 0x80073712 The component store has been corrupted. So I have nothing left to do besides a reinstall which i really dont want to do. Does anyone have any ideas?
    Thanks
      My ComputerSystem Spec
  5.    11 Oct 2017 #15
    Join Date : Oct 2017
    Posts : 436
    Windows 10 Pro 64-bit

    Quote Originally Posted by dg2317 View Post
    Hello
    I am experiencing the same repetitive problem as the rest of the people on this forum. Windows update KB4038788 causes Lockheed Martin P3D V3.4.9 to constantly CTD when the loading is 100% complete just before loading into the game. I have tried an enormous amount of potential fixes. First I tried to reinstall what i thought was the troublesome addon to no success. Second I reinstalled the simconnect platform multiple times. Third I downgraded to an older version of the flightsim (V3.4.14) again no success. And finally I have come across people having problems with KB4038788 and i tried to uninstall the update. However the very annoying part comes now as I attempted to uninstall the update for it to only say An error has occurred. Not all of the updates were successfully uninstalled. I tried many fixes to this none of them have worked and I finally tries the CMD solution posted on this form only for it to give error 0x80073712 The component store has been corrupted. So I have nothing left to do besides a reinstall which i really dont want to do. Does anyone have any ideas?
    Thanks
    Please open Command Prompt as a administrator and execute following command:

    Code:
    Dism  /online  /cleanup-image  /restorehealth
    This command will repair corrupted component store.
      My ComputerSystem Spec
  6.    12 Oct 2017 #16
    Join Date : Oct 2017
    Posts : 2
    Windows 10

    Thank you for the quick reply. I tried this and at 94.8% it stops and says error 0x800f081f Source files could not be found.
      My ComputerSystem Spec
  7.    12 Oct 2017 #17
    Join Date : Oct 2017
    Posts : 436
    Windows 10 Pro 64-bit

    Code:
    DISM /Online /Cleanup-Image /RestoreHealth

    The above command will not work if Windows Update service not working correctly. You will be prompted to use /source parameter to specify the location of the files that are require to restore the damage or missing files.




    The Install.wim is the source of where these corrupted or missing files located.
    The Windows Imaging Format (WIM) is a file-based disk image format. It was developed by Microsoft to help deploy Windows Vista and subsequent versions of Windows operating system family.
    The following command can be executed to extract corrupted or missing Windows Component Store files.

    Code:
    DISM  /Online  /Cleanup-Image   /RestoreHealth     /Source:WIM:X:\Sources\Install.wim:1    /LimitAccess
    Replace the X:\Sources folder path with a folder path where Install.wim image file is stored.
    The /LimitAcess parameter tells DISM utility to not to use Windows Update service to retrieve corrupted or missing files.
    The /Index parameter tells DISM utility to retrieve the corrupted or missing files from which edition of Windows OS. The Install.wim file can contain more than one edition of the Windows OS. You can execute following command to found out index number of your Windows OS edition that you want to repair.

    Code:
    Dism  /Get-WimInfo  /Wimfile:"L:\sources\install.wim"


    Replace the L:\sources with directory path where Install.wim stored. As you can see there is two editions of Windows 10 and all have index number.
      My ComputerSystem Spec

 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
Cannot update to KB4038788 on new desktop
Hi, I've been having a problem with windows update as of late, I can get the update just fine but then after it reboots my PC attempting to install fails saying "fatal error something-something dll" and restarts my PC reverting me back it's so...
Windows Updates and Activation
Cumulative Update KB4038788 Windows 10 v1703 Build 15063.608
UPDATE 9/25: Cumulative Update KB4040724 Windows 10 v1703 Build 15063.632 - Windows 10 Forums Source: https://support.microsoft.com/en-us/help/4038788/windows-10-update-kb4038788 Find Windows 10 Version Number
Windows 10 News
Windows Update KB4038788
How long did KB4038788 take to install on your systems? It has taken mine forever to download the update. It's not just my new one, it's all of my computers.
Windows Updates and Activation
Solved KB4038788 install failure
Over the last few days I've installed KB4038788 on 3 Dell Desktops. Not the smoothest update but I was ultimately successful. This morning I've been trying unsuccessfully to update a Dell Inspiron laptop, i5 with 8GB running Win 10 Home. First...
Windows Updates and Activation
KB4038788 Would Not Install
KB4038788 would not download nor install on my Asus portable. After trying many fixes, clean hard drive, trying to stop wuauserv, download the KB and manually install I finally was able to download and install after the following. Ran Windows...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:53.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums