1.    04 Jun 2015 #1
    Join Date : Jun 2015
    Posts : 7
    8.1

    10130 update error 0x80d02002, any solutions?


    Hi all. I am dual booting 10 and 7 on a Dell XPS 12 with 500GB SSD and 8GB RAM. No problems generally. Only issue is that I cannot get build 10130 to install. Plenty of free space, all other updates are working fine. Have left it a couple of days, including multiple reboots, have also run "dism.exe /online /cleanup-image /restorehealth". The thing that has me confused is that I ran a test install on a spare 256GB SSD, and it updated to 10130 without issue. Every other variable apart from the dual boot on the 500GB is the same.

    So does anyone have any insight into the cause, and how to fix it? Have spent a few hours trawling google but not found anything specific or helpful.

    Thanks
      My ComputerSystem Spec
  2.    04 Jun 2015 #2
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Quote Originally Posted by winaje View Post
    Hi all. I am dual booting 10 and 7 on a Dell XPS 12 with 500GB SSD and 8GB RAM. No problems generally. Only issue is that I cannot get build 10130 to install.
    If you're swaping hard drives, try re-seating the drive and make sure the cables are snug.

    Check the disk for errors (probably not, but...)

    If you have the other drive connected ... disconnect that one, leaving only the 500 GB drive connected.

    Launch an elevated Command prompt and enter the following commands
    (*** are comments, not part of the command set)

    Diskpart

    sel dis 0
    *** assuming the 500 GB is the only drive in the box.
    *** Otherwise select the drive you will clean

    clean
    *** erases first and last 100 mb - no data is accessible after command runs - it's fairly quick

    exit
    *** exit diskpart

    exit
    *** exit command prompt


    Over on Microsoft community, this was marked as the answer that helped in previous builds
    Method 1 essentially resets Windows Update

    Method 1:
    You may try these steps to reset the Windows update components manually and check.
    a. Press Windows key + X on the desktop screen of the computer.
    b. Select Command Prompt (Admin)
    c. On the open Command Prompt window copy and paste the commands (all at once).
    net stop wuauserv
    net stop cryptSvc
    net stop bits
    net stop msiserver
    ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
    ren C:\Windows\System32\catroot2 catroot2.old
    net start wuauserv
    net start cryptSvc
    net start bits
    net start msiserver
    pause
    c. Exit the command prompt and check.
    You can try the following step if the issue persists.

    Method 2:
    Check if the region is correct. Follow the steps mentioned.
    a. Type "Region" on the Start screen. Click "Settings" and press ENTER.
    b. On the "Format" tab, select "English (United Kingdom)".
    c. Click "Languages Preferences"> "Add a language" and add "your language".
    d. Once added, select it and click "Move Up" to make it the first language. Close the Language window.
    e. On the "Region" window, click "Additional Settings" and check if the values are same.
    f. Click the "Location" tab and change the Home Location to "your country" and then click OK.


    Additional resources for this process. these are pretty much the same as the above, but there might be something else in them that would help.

    How do I reset Windows Update components? (manual rest - MS Fixit doen't work on Win10)

    How to Troubleshoot common Setup and Stop Errors during Windows - Microsoft Community

      My ComputerSystem Spec
  3.    05 Jun 2015 #3
    Join Date : Jun 2015
    Posts : 7
    8.1
    Thread Starter

    Thanks Slarty. Method 2 seems to have worked, I just went into settings, then time and language, then added English UK language. Worked after that, am at 52% of 10130 now. Much appreciated.
      My ComputerSystem Spec
  4.    05 Jun 2015 #4
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    That's great - glad you got it sorted out.
      My ComputerSystem Spec
  5.    06 Jun 2015 #5
    Join Date : Jun 2015
    Posts : 1
    Windows 10

    Quote Originally Posted by Slartybart View Post
    If you're swaping hard drives, try re-seating the drive and make sure the cables are snug.

    Check the disk for errors (probably not, but...)

    If you have the other drive connected ... disconnect that one, leaving only the 500 GB drive connected.

    Launch an elevated Command prompt and enter the following commands
    (*** are comments, not part of the command set)
    Diskpart

    sel dis 0
    *** assuming the 500 GB is the only drive in the box.
    *** Otherwise select the drive you will clean

    clean
    *** erases first and last 100 mb - no data is accessible after command runs - it's fairly quick

    exit
    *** exit diskpart

    exit
    *** exit command prompt


    Over on Microsoft community, this was marked as the answer that helped in previous builds
    Method 1 essentially resets Windows Update
    Method 1 worked for me.
      My ComputerSystem Spec
  6.    07 Jun 2015 #6
    Join Date : Apr 2015
    u'k
    Posts : 65
    Windows 10 64Bit Build 10240

    would not install for me tried always for two days how time flys in the end reinstalled 9926 then after a couple of minor updates it found the upgrade took over two hours me thinks they best get their act together or hope none reads these forums b4 launch day
      My ComputerSystem Spec
  7.    07 Jun 2015 #7
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Quote Originally Posted by ashecret View Post
    Method 1 worked for me.
    Excellent, a two-for-one post. It's great that you were able to get around the issue.
      My ComputerSystem Spec
  8.    07 Jun 2015 #8
    Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3

    Quote Originally Posted by Arfer Daley View Post
    would not install for me tried always for two days how time flys in the end reinstalled 9926 then after a couple of minor updates it found the upgrade took over two hours me thinks they best get their act together or hope none reads these forums b4 launch day
    There are many reports on the forums about things not working. Win10 is after all pre-release code and that's the purpose of the Technical Preview - to help identity issues before Win10 is officially released.

    It sounds as though you were able to bring your system up-to-date - it was a pin sure, but it worked. There isn't much information about the particular reasons you had to install 9926, usually just installing the previous ISO (slow ring release) is enough.

    Good trouble shooting to find a solution that worked on your machine - I'm glad you were successful.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Solved No internet connection after 10130 update
Anyone face the issue of no internet connection after update to 10130? The motherboard is using Realtek Gigabit Ethernet. A check indicated there is driver issue which block connection to my Linksys EA9200 router. There is no issue with the...
Network and Sharing
10130 - DISM error
Getting this error when running DISM after a clean install: Log file is available if anyone wants it. I looked at it but don't understand what it's saying.
General Support
can't log in to win7 pc with win10 after 10130 update
my google-fu has google-fummed, so I'm counting on the brain trust here for direction. I have a five pc home network. the main pc is win10/10130. the other pc's are all win7, but a mix of home and pro. prior to updating win10 to 10130 (I was...
Network and Sharing
Win 10 Log Errors and solutions
I know it's really not worth spending much time trying to fix errors in the logs of a test build. It would still be great if people could post any simple fixes that they have found, if any. No need for me to post all of the errors because I'm sure...
General Support
W10 Build 10130 installation error.
I've been trying to install 10130 from an ISO and something is getting in my way. For the x64 version : The loading screen with the Windows logo pops up, it dosen't even show the loading circle and then it restarts after some time. For the...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:56.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums