Windows 10: Windows update dosen't work Solved

Page 1 of 2 12 LastLast
  1.    02 Oct 2016 #1

    Windows update dosen't work


    I have tried to find on google an answer to this error (0x80070006) on windows update. But nothing is working for me .
    I have tried following
    Windows 10 update troubleshooter all ok.
    net stop wuauserv
    net stop bits

    Then I deleted the files in C:\Windows\SoftwareDistribution
    net start wuauserv
    net start bits

    I have scanned integrity of the operating system and no faults found.

    Help.....
    Attached Thumbnails Attached Thumbnails update.png  
    Windows update dosen't work Attached Files
      My ComputerSystem Spec

  2.    02 Oct 2016 #2

    You can contact live support here:
    Windows Update Error 0x80070006 - 0x2000c | Live Support for Microsoft Products

    It looks like that's not your exact error, but let's try some basics:
    From an admin command prompt
    [Windows key + X, click command prompt (admin)]
    chkdsk C: /F
    Your PC will need to restart.
    Make sure the result is clear or fixed- else do not proceed.
    Post back the result, which you can get after a restart as follows:


    Which update were you trying to install?
    (Or what's the last update you received- see Update History)
    Have a look in the News section for news about the failed update.

    Noted your current build is 10.0.14393.103
    Noted (I think) you say you have run sfc /scannow successfully.
      My ComputerSystem Spec

  3.    02 Oct 2016 #3

    Ok I can install update trough the windows mini tool. Last update trough windows update was 9.9-16. Yes did sfc/scannow and nothing came up. Its not trying to install anything . Only there is there. In installed updates there is no update with with that date. Ill try chdsk and what comes out of it.
      My ComputerSystem Spec

  4.    02 Oct 2016 #4

    So chdsk took to about 20sek to 100% and nothing happened after that so I rebooted the comp.
    Last edited by Citrunen; 02 Oct 2016 at 15:49.
      My ComputerSystem Spec

  5.    02 Oct 2016 #5

    Something went wrong there. chkdsk cannot run on your system partition when you are logged in and using Windows. You should get a message that the system restarts. Chkdsk then runs after startup.

    Did you
    a. run it from an admin command prompt?
    b. run it on the correct disk/partition?

    Last update trough windows update was 9.9-16.
    I don't want the date. Different people get the same update at widely different dates.

    So--- let's try it a different way. Please post a screenshot of Update History like this::
    Click image for larger version. 

Name:	Snap 2016-10-02 at 22.49.53.jpg 
Views:	10 
Size:	39.7 KB 
ID:	104195

    You can edit a post rather than creating a string of individual posts..
      My ComputerSystem Spec

  6.    02 Oct 2016 #6

    No I did restart the computer for the chdsk to work and I was not logged in. I cleaned the update history already with this
    net stop wuauserv
    net stop bits
    Then I deleted the files in C:\Windows\SoftwareDistribution
    net start wuauserv
    net start bits
    So it will only show those that I did with the mini tool.
      My ComputerSystem Spec

  7.    02 Oct 2016 #7

    Click image for larger version. 

Name:	update1.png 
Views:	2 
Size:	37.0 KB 
ID:	104200
    Theese are downloaded by mini tool.
      My ComputerSystem Spec

  8.    03 Oct 2016 #8

    You can try:
    Settings, search for Troubleshooting, click Troubleshooting
    In the Window that opens click

    Fix problems with Windows Update

    at the bottom.

    Please post back the outcome.

    Also make sure you're not set to use a metered connection,
    and try checking this:
    Choose how updates are delivered is Off in Settings, Updates, Advanced Options

    There is a Windows Updates reset script here:
    Windows Update - Reset in Windows 10 - Windows 10 Forums
    and here:
    Reset Windows updates - Microsoft Community
      My ComputerSystem Spec

  9.    03 Oct 2016 #9

    So í used both reset scripts and they did not help. I have run the the troubles shooter many times but this is the first time it gave the following.
    Issues found
    Some security settings are missing or have been changed
    Some security settings are missing or have been changed
    Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Reset security settings Completed
    Service registration is missing or corrupt
    Service registration is missing or corrupt
    Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Reset service registration Completed
    Potential Windows Update Database error detected
    Potential Windows Update Database error detected
    Possible issues may prevent Windows Update from keeping your system up to date.
    Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Repair Windows Update Database Corruption Completed
    Windows Update components must be repaired
    Windows Update components must be repaired
    One or more Windows Update components are configured incorrectly.
    Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Repair Windows Update components Completed
    Potential issues that were checked
    Default Windows Update data locations have changed
    Default Windows Update data locations have changed
    The location where Windows Update stores data has changed and must be repaired.
    Issue not present
    Check for missing or corrupt files
    Check for missing or corrupt files
    Issue not present
    System date and time aren't correct
    System date and time aren't correct
    Issue not present
    Issues found Detection details

    6 Some security settings are missing or have been changed Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Reset security settings Completed
    6 Service registration is missing or corrupt Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Reset service registration Completed
    6 Potential Windows Update Database error detected Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    Possible issues may prevent Windows Update from keeping your system up to date.
    Repair Windows Update Database Corruption Completed
    One troubleshooting step to resolve WU issues is to delete and re-download updates to your computer. Would you like to try this step now? Depending on your network configuration, you may incur download costs.
    [IMG]res://sdiageng.dll/info.png[/IMG]
    DataStoreAndWULogFiles.zip
    67.93KB
    6 Windows Update components must be repaired Fixed [IMG]res://sdiageng.dll/check.png[/IMG]
    One or more Windows Update components are configured incorrectly.
    Repair Windows Update components Completed
    Repairing Windows Update components frequently resolves common Windows Update errors.

    Potential issues that were checked Detection details

    Default Windows Update data locations have changed Issue not present
    The location where Windows Update stores data has changed and must be repaired.
    Check for missing or corrupt files Issue not present
    System date and time aren't correct Issue not present
      My ComputerSystem Spec

  10.    03 Oct 2016 #10

    Click image for larger version. 

Name:	update2.png 
Views:	35 
Size:	4.0 KB 
ID:	104260
    This was the date I was talking about.
    But I have done already with the mini tool so.
    Because I cant find a solution to this I will continue to use the tool, at least that works.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
windows update doesnt work in Windows Updates and Activation
windows is set to download new updates whenever they become available... but when i click search for updates it always finds some new updates... so i have to sit and download all the updates manually... please help
My Windows 10 Update System Does Not Work in Windows Updates and Activation
For about two days now my Windows 10 update setting does not work. I have never had problems ever before with getting updates but now when I go into settings and click on UPDATES and click on CHECK FOR UPDATES, nothing happens. Oh yeah the time...
Does windows 10 Nov update work better with Grub2 installed? When the original release came out, it did the upgrade but when almost completed it rolled back. The workaround I did, was to restore windows 7 boot using bootrec /fixboot and...
Windows 10 dosen't work in General Support
I downloaded 10 some days ago(the update went smoth. But after i log in the first time all i see is a black screen and my mouse. So i thought iy maybe wan't done downloading. I let it stand still for some hours, But nothing. I try to restart it, But...
windows update will not work in Windows Updates and Activation
windows update service registration is missing or corrupt is what i get when i run fix-it from microsoft
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:04.
Find Us