Cumulative updates will not install

  1. Posts : 12
    Windows 10 home 32 bit
       10 Sep 2016 #1

    Cumulative updates will not install

    Hi folks,

    cumulative updates will not install. Other updates do install without a problem... so WU itself is working..

    I run sfc which brought some errors, which could not be corrected. CBS log is attached.

    Would not want to reinstall as this PC has some specialised software..

    thx in advance
    Cumulative updates will not install Attached Files
      My ComputerSystem Spec

  2.    10 Sep 2016 #2

    Hello, what error message (exact text please) do you get when the update fails?

    Given your concerns about maintaining the state of your PC, have you started using disk imaging yet- which allows you to restore your PC to a previous working state when you encounter problems, and may save you reinstalling Windows?

    Have you run chkdsk to verify your file system?
    From an admin command prompt
    [Windows key + X, click command prompt (admin)]
    chkdsk C: /F
    Your PC will need to restart.
    Make sure the result is clear or fixed- else do not proceed.
    Post back the result, which you can get after a restart as follows:
    How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

    Some find that repeating sfc /scannow a couple of times with a restart between solves the problem.

    If this reports a failure, then the following downloads new files
    Open a Powershell window and at the prompt type (or copy and paste)
    DISM /Online /Cleanup-Image /RestoreHealth and press <Return>.

    Again, be patient.

    Finally, post back the result, after checking your symptoms.

    If that fails, the next option would be an in-place upgrade repair install- which keeps your programs.
      My ComputersSystem Spec

  3. Posts : 12
    Windows 10 home 32 bit
    Thread Starter
       12 Sep 2016 #3


    I appreciate taking the time to respond.

    I do not recall specific error. After rebooting to update, it tries to.. then says "reverting changes".. and then in the update history - Failed to update (see attached screenshot)

    chckdsk did not return any errors after reboot

    Second sfc scan again reports problems were not repaired.

    I am now trying the last command you've posted. .. I will get back with the results..
    Attached Thumbnails Attached Thumbnails Capture.JPG  
      My ComputerSystem Spec

  4. Posts : 12
    Windows 10 home 32 bit
    Thread Starter
       12 Sep 2016 #4

    Alright... here is the result:
    Attached is the log.

    C:\Windows\system32>DISM /Online /Cleanup-Image /RestoreHealth

    Deployment Image Servicing and Management tool
    Version: 10.0.10586.0

    Image Version: 10.0.10586.0


    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
    Cumulative updates will not install Attached Files
      My ComputerSystem Spec

  5.    12 Sep 2016 #5

    Hi, recommend you attempt an in-place upgrade repair install.
    Do you already have a build 1511 iso or bootable medium? If not you'll need one. Use this:
    Microsoft Windows and Office ISO Download Tool

    An In-place upgrade repair install will fix many things, but not those where the settings are not changed by the procedure.

    For this you need an installation medium with the same base build as you have installed, and x64 if you have a 64 bits OS, else x86 (32 bits).

    Repair Install Windows 10 with an In-place Upgrade - Windows 10 Forums
    - this includes a link from which you can obtain Windows 10 iso file (" download a Windows 10 ISO"), or create a bootable medium.

    I would recommend creating the bootable medium, as this can be used
    - for any future in-place upgrade repair install
    - to boot from and use its recovery options should Windows become unbootable.
    - to clean install Windows

    This will refresh Windows, after the manner of a Windows installation.
    - all/most associations will be unchanged
    - all your programs will be left installed
    - no personal data should be affected
    - you will lose any custom fonts
    - you will lose any customised system icons
    - you may need to re-establish your Wi-Fi connection
    - you will need to redo Windows updates subsequent to the build you have used for the repair install
    - Windows.old will be created
    - system restore will be turned off- you should turn it on again and I recommend you manually schedule a daily restore point.
    - you will need to redo any language downloads including the display language if you changed that)
    - inactive title bar colouring (if used) will be reset to default
    - if Qttabbar is installed, you need to re-enable it in explorer (Options, check Qttabbar)
    This is one of the better features of Win10: as each major build comes out, that's your updated reference build, and as updates are mostly cumulative, there will be few to do.

    Before you perform this major repair procedure, do create a disk image.

    Please consider using disk imaging regularly. It's a brilliant way to
    - preserve your system (and your sanity)
    - back up your data
    - restore your system to a previously working state in a relatively short time

    Recommended: Macrium Reflect (free/commercial) + boot disk/device + large enough external storage medium.
      My ComputersSystem Spec

  6.    12 Sep 2016 #6

    This update was superseded so perhaps try the newer one instead , it is Cumlative , so includes all earlier fixes...........

    get it here

    Windows 10 Update Archive
      My ComputerSystem Spec


Related Threads
MCT and cumulative updates in Installation and Upgrade
MCT and cumulative updates on a different website I recently read that it might be possible tosomehow include the cumulative updates in the creation process of the ISO. Is that true and if so, how is that process??
I'm still not certain if the new builds that come out,( eg 10586.36, and now 10586.63) also contain all the latest Windows security updates as well? (not referring to defender updates I know they are distinct) I've noticed that my Windows 10 PC...
Hello! My test computer (specs follow) is stuck at build 10586.11 I cannot install any cumulative upgrade, they all fail and Windows Update undoes any change to the system. In order to be able to install any other update I have to use the...
Read more: Microsoft's Joe Belfiore Says Windows 10 Cumulative Updates Are Just What We Need - Softpedia
Hello All! I'm new to the Insider Program and am currently running build 10565 on one laptop and 10240 RTM on another. Quick question about getting updates on Insider builds - do I get cumulative & security updates that are available for the RTM...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:32.
Find Us