Another Activation Problem

Page 1 of 8 123 ... LastLast

  1. Posts : 69
    XP, 7, 10
       #1

    Another Activation Problem


    I'm pretty sure I'm screwed, but here goes anyways. I acquired a HP Elitedesk tower that came with no hard drive. I installed 10 off a flash drive but it doesn't activate. There is no COA since it was designed for Windows 8. But the sticker that is on it says that it was downgraded to Win 7 Pro. So if I'm reading it right, Windows 8's activation number would have been embedded in the BIOS, but it was downgraded to 7 so there is nothing in the BIOS, and the Win 7 number went with the old hard drive. I've verified that there's no number in the BIOS, RWEverything shows no MSDM table.

    So what am I missing? Do I simply have a computer with no usable activation number? Any chance that talking with MS would help? Thanks!
      My Computer


  2. Posts : 18,424
    Windows 11 Pro
       #2

    You can run showkey plus from this forum to verify there is no product key in bios:
    Showkey - Windows 10 Forums

    If there is no product key in bios, and there is no product key printed on a sticker/label - then you are going to have to purchase one.
      My Computer


  3. Posts : 69
    XP, 7, 10
    Thread Starter
       #3

    NavyLCDR said:
    You can run showkey plus from this forum to verify there is no product key in bios:
    Showkey - Windows 10 Forums

    If there is no product key in bios, and there is no product key printed on a sticker/label - then you are going to have to purchase one.

    I was afraid of that, thanks.
      My Computer


  4. Posts : 3,453
       #4

    CTPhil said:
    I was afraid of that, thanks.
    Does ShowKey display a Windows 7 marker? If so, send me this registry key and I'll see if I can get Win 7 Pro OEM back for you.

    HKEY_LOCAL_MACHINE\HARDWARE\ACPI\RSDT
      My Computer


  5. Posts : 69
    XP, 7, 10
    Thread Starter
       #5

    There have been a couple of plot twists. I installed Windows 7 and it activated, (I had a product key to enter, it didn't auto activate) so I immediately used my media to do an upgrade to 10. Once I had 10 again, still no digital entitlement. In the past I've had problems doing the 7 to 10 leap too fast after installing 7, but thought since 7 was activated and I was doing an upgrade it would be OK. So I've rolled back to 7, planning to install some updates and give it time to settle before trying again.

    As for ShowKey, I ran it when 10 didn't validate, and it showed 2 keys, one of which was the 7 key. The other looked like one of those generic Windows keys. It also had language about a marker in the BIOS.

    Thanks for the reply, I'll post back.
      My Computer


  6. Posts : 5,286
    Win 10 Pro x64
       #6

    Check if you selected the right Windows 10 version (Home, Pro, etc.) that is matched with your Windows 7 version.
      My Computer


  7. Posts : 15,027
    Windows 10 IoT
       #7

    Unless you have custom matching OEM install media for Windows 7, it will not auto activate. There is OEM info in the BIOS but no key is stored there. If you use stock install media a key will have to be entered manually to activate. Are you 100% sure your Windows 7 activated?
    How did you do the upgrade? Some details may help sort that out.
      My Computer


  8. Posts : 69
    XP, 7, 10
    Thread Starter
       #8

    When I installed 7 (Pro, and yes it matched with 10) I used my 7 All In One Flash drive and entered the product key after the fact, and it said it was activated. When I went to 10, I used media I put on a flash drive using the Media Creation Tool, and selected "upgrade", and "keep all of your files". I also then deferred entering a key thinking it would auto activate with digital entitlement.
      My Computer


  9. Posts : 18,424
    Windows 11 Pro
       #9

    CTPhil said:
    When I installed 7 (Pro, and yes it matched with 10) I used my 7 All In One Flash drive and entered the product key after the fact, and it said it was activated. When I went to 10, I used media I put on a flash drive using the Media Creation Tool, and selected "upgrade", and "keep all of your files". I also then deferred entering a key thinking it would auto activate with digital entitlement.
    An upgrade to a matching version of Windows 10 will not ask for a product key. You have a version mismatch or an edition mismatch. For example, you installed Windows 7 single language edition and you are trying to upgrade to regular plain Windows 10 (not single language). Or you installed Windows 7 Pro but are trying to upgrade with an old build 10240 Windows 10 edition that only contains Home.

    In your Windows 7, press win +R keys to open a run dialog. Run winver. Post the results screen here. Also open a "run as administrator" command prompt. Run:
    slmgr /dlv

    Post that result window here. Then we can figure out what edition/version of Windows 10 you need to install, or we might also be able to see something wrong with the Windows 7 activation that is causing problems - like it is activated with a Volume License Key.
      My Computer


  10. Posts : 69
    XP, 7, 10
    Thread Starter
       #10

    Another Activation Problem-screen1.pngAnother Activation Problem-screen2.png
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:52.
Find Us




Windows 10 Forums