I having issues installing this new update released. After it reboots i get PAGE_FAULT blue screen error then goes back to prior state. I searched & tried using the media tool as this update in windows os. All went fine then same error when it rebooted. Seems this update not working. I tried it on laptop with home edition installed ok.
Seems this update a mistake & tried this several times.
You said that you get "PAGE_FAULT blue screen error" when rebooting. In that case what is this screenshot you attached to your message? Where did you get it and what does it have to do with the issue?
This pic from the media tool i tried to use, Make a DVD. It seems this is the next version of windows 10. It wont install I checked the update in windows 10 today & nothing there now just the windows defender updates. Microsoft took it off I had friends here locally had the same issue also. I am using version 10.0.10240 as the 1511 not available now through the update.
Well, you said something about some "PAGE_FAULT". The picture you posted does not say anything about any PAGE_FAULT. So, where did the PAGE_FAULT come from?
Meanwhile, the picture you posited depicts a rather widely reported "SAFE_OS BOOT" error. It typically happens when you are attempting to upgrade a drive that was prepared by drive-cloning software (like HDD-to-SSD cloning/transfer tool - Paragon Software HDD-to-SSD, for one example). I had the same error and I found no workaround for it, besides deleting all partitions from the SSD and doing a clean install.
I have 2 w10 pro 64 installations and this update has failed multiple times and I have gone back to an earlier restore point after getting a blue screen showing WHEA UNCORRECTABLE ERROR. Anyone else having this problem?
I have same issue on a customer computer ,its a win7 upgraded to build 10240 awhile back ,any attempt to upgrade to latest 10586 fails with same or similar issue , I get that same blue screen with the same error ,after it get to about 28% and and say reverting back to previous os
info from error log .
------------------
2015-11-18 15:24:09, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:01, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:15, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:23, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:30, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:30, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-11-18 15:27:30, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session[gle=0x000000b7]
2015-11-18 15:27:52, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:27:54, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:28:04, Error CDiagnosticsHelper::SetDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
2015-11-18 15:28:11, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-11-18 15:28:13, Error CONX WlanOpenHandle failed with error 00000426
2015-11-18 15:28:34, Error CONX Unable to get message handle 80092009 c:\windows\system32\drivers\atihdwt6.sys
2015-11-18 15:28:36, Error CONX Failed to get inf path SYSTEM\CurrentControlSet\Control\Network\{4d36e975-e325-11ce-bfc1-08002be10318}\{58474950-424f-0058-cfe8-aba2187557f2}
2015-11-18 15:28:36, Error CONX Failed to add net component 80070002
2015-11-18 15:28:36, Error CONX Failed to open inf key SYSTEM\CurrentControlSet\Control\Network\{6bdd1fc5-810f-11d0-bec7-08002be2092f}\{8850d726-4186-4018-9d80-bdd5494cfb13}
2015-11-18 15:28:36, Error CONX Failed to add net component 80070002
2015-11-18 15:31:09, Error SP pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2015-11-18 15:31:21, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: "id" attribute is mandatory. void __cdecl Mig::CMXEMigrationXml::LoadSupportedComponent(class UnBCL::XmlNode *,int,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *)
2015-11-18 15:31:24, Error [0x080831] MIG CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{39CC25F3-AF21-4C42-854D-0524249F02CE} already loaded __cdecl Mig::CMXEMigrationXml::CMXEMigrationXml(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2015-11-18 15:31:33, Error CSI 00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #43191# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-11-18 15:31:36, Error CSI 00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #122879# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-11-18 15:31:50, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2015-11-18 15:31:52, Error CSI 00000003 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #213128# from CWcmScalarInstanceCore::GetCurrentValue(options = 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-11-18 15:33:26, Error [0x0808fe] MIG Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2015-11-18 15:33:26, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2015-11-18 15:33:55, Error CSetupAutomation::Resurrect: File not found: C:\$WINDOWS.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2015-11-18 15:33:55, Error SP CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
Microsoft should of not released it as so many having issues with it. If you check now it's off the update site so there aware now.
Quote