Windows 10 20h2 no longer upates

Page 1 of 2 12 LastLast
  1. AlterMind's Avatar
    Posts : 28
    Windows 10
       #1

    [SOLVED] Windows 10 20h2 no longer upates (missing partition?)


    Hi,

    I've recently noticed that my Windows Home v20H2 19.042 repeatedly cycles in trying to install the 2021-05 Cumulative Update for Windows 10 Version 20H2 for x64-based Systems (KB5003173) but after what seems to be two attempts to apply the update separated by restarts, it undoes any change and reverts to the previous situation. The Settings panel mentions the update error code 0x800f0922. Then tries again the day after (download/install/wait to restart).

    Aside from this, once reverted, the PC runs fine. I have no errors with the "sfc /scannow" check.

    For a bit of context that would likely be at the root of the situation, I did one month ago, with the helpful assistance of this forum, completely got rid of and free-up a HDD where the OS was initially installed on, after having moved the OS and EFI partitions to the SSD. I wonder if some required partition isn't missing (Recovery ? other system reserved ?) which was on the HDD formerly but got wiped.

    As complementary information:
    • The msconfig application shows nothing in the list of OS's under the boot tab
    • Running bcdedit /enum command returns following error message:
      The boot configuration data store could not be opened.The requested system device cannot be found.
    • When forcing the computer to enter the advanced startup mode, the displayed menu only shows "Power Off", and not the "usual" made of these "System Restore", "Startup Repair", "Command Prompt", "System Image Recovery", "Choose Another Operating System", etc...
    • Visual BCD editor won't even start (claiming to require admin credentials, while they are provided)

    Am I right assuming a required partition is missing or do I not need it and would a configuration change suffice ?
    Thanks for your precious advice !

    This is what the Windows disk partition tool looks like now:
    Windows 10 20h2 no longer upates-image.png

    And this is what MiniTool Partition Wizard shwos at start-up:
    Windows 10 20h2 no longer upates-image.png

    Additionally, these are the info collected by DiskParInfo.bat : (don't know why it all appears on a single line despite the CR/LF characters are there !?)
    Code:
    Disk 0 : HDD. It has 1 partition(s). Model: ST1000DX001-1CM162        Disk 1 : SSD. It has 3 partition(s). Model: CT500BX100SSD1        The script has found the above 2 storage device(s) in total.=======================================================================Microsoft DiskPart version 10.0.19041.610Copyright (C) Microsoft Corporation.On computer: OSIRIS  Disk ###  Status         Size     Free     Dyn  Gpt  --------  -------------  -------  -------  ---  ---  Disk 0    Online          931 GB      0 B        *  Disk 1    Online          465 GB  2048 KB        *  Disk 2    No Media           0 B      0 B           Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------  Volume 0     K                       DVD-ROM         0 B  No Media             Volume 1     D   BigData      NTFS   Partition    931 GB  Healthy              Volume 2     C   Win10        NTFS   Partition    465 GB  Healthy    Boot      Volume 3     Y   EFI          FAT32  Partition     99 MB  Healthy    System    Volume 4                      NTFS   Partition    521 MB  Healthy    Hidden    Volume 5                             Removable       0 B  No Media           Disk 0 is now the selected disk.ST1000DX001-1CM162Disk ID: {DEBBB781-CD0F-49DE-BBA4-4D947AA55215}Type   : SATAStatus : OnlinePath   : 0Target : 0LUN ID : 0Location Path : PCIROOT(0)#PCI(1F02)#ATA(C00T00L00)Current Read-only State : NoRead-only  : NoBoot Disk  : NoPagefile Disk  : NoHibernation File Disk  : NoCrashdump Disk  : NoClustered Disk  : No  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------  Volume 1     D   BigData      NTFS   Partition    931 GB  Healthy              Partition ###  Type              Size     Offset  -------------  ----------------  -------  -------  Partition 1    Primary            931 GB  1024 KBPartition 1 is now the selected partition.Partition 1Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden  : NoRequired: NoAttrib  : 0000000000000000Offset in Bytes: 1048576  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------* Volume 1     D   BigData      NTFS   Partition    931 GB  Healthy            Disk 1 is now the selected disk.CT500BX100SSD1Disk ID: {B2669E5A-BB33-4900-88CD-A0F99A22C2B4}Type   : SATAStatus : OnlinePath   : 4Target : 0LUN ID : 0Location Path : PCIROOT(0)#PCI(1F02)#ATA(C04T00L00)Current Read-only State : NoRead-only  : NoBoot Disk  : YesPagefile Disk  : YesHibernation File Disk  : NoCrashdump Disk  : YesClustered Disk  : No  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------  Volume 2     C   Win10        NTFS   Partition    465 GB  Healthy    Boot      Volume 3     Y   EFI          FAT32  Partition     99 MB  Healthy    System    Volume 4                      NTFS   Partition    521 MB  Healthy    Hidden    Partition ###  Type              Size     Offset  -------------  ----------------  -------  -------  Partition 1    Primary            465 GB  1024 KB  Partition 2    Primary             99 MB   465 GB  Partition 3    Recovery           521 MB   465 GBPartition 1 is now the selected partition.Partition 1Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden  : NoRequired: NoAttrib  : 0000000000000000Offset in Bytes: 1048576  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------* Volume 2     C   Win10        NTFS   Partition    465 GB  Healthy    Boot    Partition 2 is now the selected partition.Partition 2Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7Hidden  : NoRequired: NoAttrib  : 0000000000000000Offset in Bytes: 499455623168  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------* Volume 3     Y   EFI          FAT32  Partition     99 MB  Healthy    System  Partition 3 is now the selected partition.Partition 3Type    : de94bba4-06d1-4d40-a16a-bfd50179d6acHidden  : YesRequired: YesAttrib  : 0X8000000000000001Offset in Bytes: 499560480768  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info  ----------  ---  -----------  -----  ----------  -------  ---------  --------* Volume 4                      NTFS   Partition    521 MB  Healthy    Hidden  ===============================================================================Windows Recovery Environment (Windows RE) and system reset configurationInformation:    Windows RE status:         Disabled    Windows RE location:           Boot Configuration Data (BCD) identifier: 1debaa11-46a9-11ea-97fc-b8aeed25f4c5    Recovery image location:       Recovery image index:      0    Custom image location:         Custom image index:        0REAGENTC.EXE: Operation Successful.    ===============================================================================The boot configuration data store could not be opened.The requested system device cannot be found.
    Last edited by AlterMind; 4 Weeks Ago at 14:56. Reason: Mark as solved.
      My Computer

  2. dalchina's Avatar
    Posts : 31,386
    Win 10 Pro (1903)
       #2

    Hi, most probably you have uninstalled Edge Chromium. You need to reinstall that to update.

    A tenforums member very recently confirmed this,
    Windows 10 20H2-05 (KB5003173) Cumulative Update Error

    and this is reflected in the note at the top of the News thread - the News section carries a thread per update per build

    KB5003173 CU Windows 10 v2004 build 19041.985 and v20H2 19042.985

    When forcing the computer to enter the advanced startup mode, the displayed menu only shows "Power Off", and not the "usual" made of these "System Restore", "Startup Repair", "Command Prompt", "System Image Recovery", "Choose Another Operating System", etc...
    This is probably because of a problem with your Recovery partition as you mention.
    Please post the result of
    reagentc /info
    from an admin command prompt.

    You seem to be missing this partition:
    Windows 10 20h2 no longer upates-1.png

    To fix the partition problems, my personal approach would be the most routine:
    a. Image C: (I hope you're already using disk imaging) - to an external disk.
    b. Clean install Win 10 (deleting all partitions on the disk).
    c. Restore the image of C: in place of the new Windows partition
    d. Restart. Either automatic repair or if necessary Startup Repair using a Win 10 installation disk should sort things out.
      My Computers

  3. AlterMind's Avatar
    Posts : 28
    Windows 10
    Thread Starter
       #3

    Thanks Dalchina for the fast response. I'll answer the various elements separately:

    1) I didn't uninstall Edge Chromium and I'm actually using it from time to time. Here is its version:
    Windows 10 20h2 no longer upates-image.png
    Besides, it looks that several issues produce the error code I reported. One of them (as reported on EaseUs's Backup tool support site) being a "too small partition", which sounds a closer issue to the system partition I would be missing.

    2) The reagentc /info output was provided in the clumsy code section of my original post. It says:
    Code:
    C:\Windows\system32>reagentc /info
    Windows Recovery Environment (Windows RE) and system reset configuration
    
    Information:
    
        Windows RE status:         Disabled
        Windows RE location:
        Boot Configuration Data (BCD) identifier: 1debaa11-46a9-11ea-97fc-b8aeed25f4c5
        Recovery image location:
        Recovery image index:      0
        Custom image location:
        Custom image index:        0
    
    REAGENTC.EXE: Operation Successful.
    3) Missing Partition
    Yes it looks like at least *one* partition is missing : The "System Reserved" but maybe also the "Recovery Partition" ? I'm not sure if comparing with your situation makes much sense : I'm running with to partitions, you're running with six ! I might therefore be missing *four* partitions !

    Before trying the "routine" sequence you suggest, should i not try the Repair with the Win 10 installation disk (I guess after fetching the latest Win 10 installation media from Microsoft and putting it on a USB disk)?

    Thanks again for our advice !
      My Computer

  4. dalchina's Avatar
    Posts : 31,386
    Win 10 Pro (1903)
       #4

    Thanks for confirming this is not related to Edge C.

    I'm not sure if comparing with your situation makes much sense : I'm running with to partitions, you're running with six ! I might therefore be missing *four* partitions !
    No, only 4 are used. The others are leftovers I've not bothered to tidy up. The first was an original Recovery partition - MS now places those AFTER C: on a new installation. Both the two 'extra's are unallocated if you notice.

    I don't know that an in-place upgrade repair install would
    a. succeed in this instance
    b. create the missing partition

    You can try it of course..

    reagentc merely confirms what we already know, of course, so that was expected.

    The procedure I suggested should provide the missing partition issues and fix your recovery partition problem, and your booting problems.

    It might as you suggest fix your update error.

    It may well also then fix your Visual BCD editor problem.
      My Computers

  5. Matthew Wai's Avatar
    Posts : 5,799
    Windows 10 Home 20H2
       #5

    AlterMind said:
    (don't know why it all appears on a single line despite the CR/LF characters are there !?)
    You will know why after reading the following tutorial:

    How to Change Post Editor to Source or WYSIWYG Mode at TenForums.com
      My Computer

  6. AlterMind's Avatar
    Posts : 28
    Windows 10
    Thread Starter
       #6

    Matthew Wai said:
    You will know why after reading the following tutorial:
    How to Change Post Editor to Source or WYSIWYG Mode at TenForums.com
    Hum... nope. Neither does it explain the situation I'm complaining about (the published code appears on a single line), nor did I find any corrective procedure. That "training" just explains the use of the toggle button between wysiwig and source modes.
    Actually I seem to narrow down the issue to the use of "Preview", which seems to remove all the CR/LF. I'll check with another browser (using Brave here).
      My Computer

  7. Matthew Wai's Avatar
    Posts : 5,799
    Windows 10 Home 20H2
       #7

    The following is the output of DiskParInfo.bat.
    The output is not shown on a single line.
    Code:
        Disk 0 : HDD. It has 5 partition(s). Model: ST500DM002-1BD142    
        Disk 1 : USB. It has 2 partition(s). Model: PNY OU3 3.0  
        Disk 2 : USB. It has 1 partition(s). Model: Kingston DataTraveler 2.0  
    
        The script has found the above 3 storage device(s) in total.
    =======================================================================
    
    Microsoft DiskPart version 10.0.19041.610
    
    Copyright (C) Microsoft Corporation.
    On computer: DESKTOP
    
      Disk ###  Status         Size     Free     Dyn  Gpt
      --------  -------------  -------  -------  ---  ---
      Disk 0    Online          465 GB      0 B        *
      Disk 1    Online           28 GB      0 B         
      Disk 2    Online         7388 MB      0 B         
      Disk 3    No Media           0 B      0 B         
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 0     Z                       DVD-ROM         0 B  No Media           
      Volume 1     C   Windows 10   NTFS   Partition     80 GB  Healthy    Boot    
      Volume 2     D   Data         NTFS   Partition    384 GB  Healthy            
      Volume 3                      FAT32  Partition    100 MB  Healthy    System  
      Volume 4         Recovery     NTFS   Partition    499 MB  Healthy    Hidden  
      Volume 5     F   EXTRA        FAT32  Removable     20 GB  Healthy            
      Volume 6     H   Windows ISO  NTFS   Removable      8 GB  Healthy            
      Volume 7     E   DEVICE       FAT32  Removable   7387 MB  Healthy            
      Volume 8     I                       Removable       0 B  No Media           
    
    Disk 0 is now the selected disk.
    
    ST500DM002-1BD142
    Disk ID: {035E2069-D591-48E4-A788-02F723C69431}
    Type   : SATA
    Status : Online
    Path   : 1
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(1F02)#ATA(C01T00L00)
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : Yes
    Pagefile Disk  : Yes
    Hibernation File Disk  : No
    Crashdump Disk  : Yes
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 1     C   Windows 10   NTFS   Partition     80 GB  Healthy    Boot    
      Volume 2     D   Data         NTFS   Partition    384 GB  Healthy            
      Volume 3                      FAT32  Partition    100 MB  Healthy    System  
      Volume 4         Recovery     NTFS   Partition    499 MB  Healthy    Hidden  
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    System             100 MB  1024 KB
      Partition 2    Reserved            16 MB   101 MB
      Partition 3    Primary             80 GB   117 MB
      Partition 4    Recovery           499 MB    80 GB
      Partition 5    Primary            384 GB    81 GB
    
    Partition 1 is now the selected partition.
    
    Partition 1
    Type    : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
    Hidden  : Yes
    Required: No
    Attrib  : 0X8000000000000000
    Offset in Bytes: 1048576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 3                      FAT32  Partition    100 MB  Healthy    System  
    
    Partition 2 is now the selected partition.
    
    Partition 2
    Type    : e3c9e316-0b5c-4db8-817d-f92df00215ae
    Hidden  : Yes
    Required: No
    Attrib  : 0X8000000000000000
    Offset in Bytes: 105906176
    
    There is no volume associated with this partition.
    
    Partition 3 is now the selected partition.
    
    Partition 3
    Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden  : No
    Required: No
    Attrib  : 0000000000000000
    Offset in Bytes: 122683392
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 1     C   Windows 10   NTFS   Partition     80 GB  Healthy    Boot    
    
    Partition 4 is now the selected partition.
    
    Partition 4
    Type    : de94bba4-06d1-4d40-a16a-bfd50179d6ac
    Hidden  : Yes
    Required: Yes
    Attrib  : 0X8000000000000001
    Offset in Bytes: 86450896896
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 4         Recovery     NTFS   Partition    499 MB  Healthy    Hidden  
    
    Partition 5 is now the selected partition.
    
    Partition 5
    Type    : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
    Hidden  : No
    Required: No
    Attrib  : 0000000000000000
    Offset in Bytes: 86974136320
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 2     D   Data         NTFS   Partition    384 GB  Healthy            
    
    Disk 1 is now the selected disk.
    
    PNY OU3 3.0 USB Device
    Disk ID: 0E8684D5
    Type   : USB
    Status : Online
    Path   : 0
    Target : 0
    LUN ID : 0
    Location Path : UNAVAILABLE
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : No
    Pagefile Disk  : No
    Hibernation File Disk  : No
    Crashdump Disk  : No
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 5     F   EXTRA        FAT32  Removable     20 GB  Healthy            
      Volume 6     H   Windows ISO  NTFS   Removable      8 GB  Healthy            
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    Primary             20 GB  1024 KB
      Partition 2    Primary              8 GB    20 GB
    
    Partition 1 is now the selected partition.
    
    Partition 1
    Type  : 0C
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 5     F   EXTRA        FAT32  Removable     20 GB  Healthy            
    
    Partition 2 is now the selected partition.
    
    Partition 2
    Type  : 07
    Hidden: No
    Active: No
    Offset in Bytes: 22418784256
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 6     H   Windows ISO  NTFS   Removable      8 GB  Healthy            
    
    Disk 2 is now the selected disk.
    
    Kingston DataTraveler 2.0 USB Device
    Disk ID: 4C516856
    Type   : USB
    Status : Online
    Path   : 0
    Target : 0
    LUN ID : 0
    Location Path : UNAVAILABLE
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : No
    Pagefile Disk  : No
    Hibernation File Disk  : No
    Crashdump Disk  : No
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 7     E   DEVICE       FAT32  Removable   7387 MB  Healthy            
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    Primary           7387 MB    31 KB
    
    Partition 1 is now the selected partition.
    
    Partition 1
    Type  : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 32256
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 7     E   DEVICE       FAT32  Removable   7387 MB  Healthy            
    
    ===============================================================================
    
    Windows Recovery Environment (Windows RE) and system reset configuration
    Information:
    
        Windows RE status:         Enabled
        Windows RE location:       \\?\GLOBALROOT\device\harddisk0\partition4\Recovery\WindowsRE
        Boot Configuration Data (BCD) identifier: 0f3f41f3-5ae2-11eb-a27e-e0d55ecc65a3
        Recovery image location:   
        Recovery image index:      0
        Custom image location:     
        Custom image index:        0
    
    REAGENTC.EXE: Operation Successful.
        
    ===============================================================================
    
    Firmware Boot Manager
    ---------------------
    identifier              {fwbootmgr}
    displayorder            {bootmgr}
                            {562f507a-413a-11eb-bfdb-e0d55ecc65a3}
                            {562f5077-413a-11eb-bfdb-e0d55ecc65a3}
                            {bootmgr}
                            {bootmgr}
                            {bootmgr}
                            {1a9884ec-b182-11eb-a332-806e6f6e6963}
                            {5889bd6f-b203-11eb-a333-806e6f6e6963}
    timeout                 1
    
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    device                  partition=\Device\HarddiskVolume1
    path                    \EFI\Microsoft\Boot\bootmgfw.efi
    description             Windows Boot Manager
    locale                  en-US
    inherit                 {globalsettings}
    default                 {current}
    resumeobject            {562f507c-413a-11eb-bfdb-e0d55ecc65a3}
    displayorder            {current}
    toolsdisplayorder       {memdiag}
    timeout                 0
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {1a9884ec-b182-11eb-a332-806e6f6e6963}
    device                  partition=E:
    description             UEFI: KingstonDataTraveler 2.01.00
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f5071-413a-11eb-bfdb-e0d55ecc65a3}
    description             CD/DVD Drive 
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f5073-413a-11eb-bfdb-e0d55ecc65a3}
    description             Hard Drive 
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f5074-413a-11eb-bfdb-e0d55ecc65a3}
    description             CD/DVD Drive 
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f5075-413a-11eb-bfdb-e0d55ecc65a3}
    description             CD/DVD Drive 
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f5076-413a-11eb-bfdb-e0d55ecc65a3}
    description             Generic STORAGE DEVICE 0903
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f5077-413a-11eb-bfdb-e0d55ecc65a3}
    description             CD/DVD Drive 
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {562f507a-413a-11eb-bfdb-e0d55ecc65a3}
    description             Hard Drive 
    
    Firmware Application (101fffff)
    -------------------------------
    identifier              {5889bd6f-b203-11eb-a333-806e6f6e6963}
    device                  partition=F:
    description             UEFI: PNY OU3 3.0 PMAP
    
    Windows Boot Loader
    -------------------
    identifier              {0f3f41f3-5ae2-11eb-a27e-e0d55ecc65a3}
    device                  ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{0f3f41f4-5ae2-11eb-a27e-e0d55ecc65a3}
    path                    \windows\system32\winload.efi
    description             Windows Recovery Environment
    locale                  en-US
    inherit                 {bootloadersettings}
    displaymessage          Recovery
    osdevice                ramdisk=[\Device\HarddiskVolume4]\Recovery\WindowsRE\Winre.wim,{0f3f41f4-5ae2-11eb-a27e-e0d55ecc65a3}
    systemroot              \windows
    nx                      OptIn
    bootmenupolicy          Standard
    winpe                   Yes
    
    Windows Boot Loader
    -------------------
    identifier              {current}
    device                  partition=C:
    path                    \Windows\system32\winload.efi
    description             Windows 10
    locale                  en-US
    inherit                 {bootloadersettings}
    recoverysequence        {0f3f41f3-5ae2-11eb-a27e-e0d55ecc65a3}
    displaymessageoverride  Recovery
    recoveryenabled         Yes
    isolatedcontext         Yes
    allowedinmemorysettings 0x15000075
    osdevice                partition=C:
    systemroot              \Windows
    resumeobject            {562f507c-413a-11eb-bfdb-e0d55ecc65a3}
    nx                      OptIn
    bootmenupolicy          Standard
    
    Windows Boot Loader
    -------------------
    identifier              {562f507e-413a-11eb-bfdb-e0d55ecc65a3}
    device                  ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{562f507f-413a-11eb-bfdb-e0d55ecc65a3}
    path                    \windows\system32\winload.efi
    description             Windows Recovery Environment
    locale                  en-us
    inherit                 {bootloadersettings}
    displaymessage          Recovery
    osdevice                ramdisk=[unknown]\Recovery\WindowsRE\Winre.wim,{562f507f-413a-11eb-bfdb-e0d55ecc65a3}
    systemroot              \windows
    nx                      OptIn
    bootmenupolicy          Standard
    winpe                   Yes
    
    Resume from Hibernate
    ---------------------
    identifier              {562f507c-413a-11eb-bfdb-e0d55ecc65a3}
    device                  partition=C:
    path                    \Windows\system32\winresume.efi
    description             Windows Resume Application
    locale                  en-US
    inherit                 {resumeloadersettings}
    recoverysequence        {0f3f41f3-5ae2-11eb-a27e-e0d55ecc65a3}
    recoveryenabled         Yes
    isolatedcontext         Yes
    allowedinmemorysettings 0x15000075
    filedevice              partition=C:
    filepath                \hiberfil.sys
    bootmenupolicy          Standard
    debugoptionenabled      No
    
    Windows Memory Tester
    ---------------------
    identifier              {memdiag}
    device                  partition=\Device\HarddiskVolume1
    path                    \EFI\Microsoft\Boot\memtest.efi
    description             Windows Memory Diagnostic
    locale                  en-US
    inherit                 {globalsettings}
    badmemoryaccess         Yes
    
    EMS Settings
    ------------
    identifier              {emssettings}
    bootems                 No
    
    Debugger Settings
    -----------------
    identifier              {dbgsettings}
    debugtype               Local
    
    RAM Defects
    -----------
    identifier              {badmemory}
    
    Global Settings
    ---------------
    identifier              {globalsettings}
    inherit                 {dbgsettings}
                            {emssettings}
                            {badmemory}
    
    Boot Loader Settings
    --------------------
    identifier              {bootloadersettings}
    inherit                 {globalsettings}
                            {hypervisorsettings}
    
    Hypervisor Settings
    -------------------
    identifier              {hypervisorsettings}
    hypervisordebugtype     Serial
    hypervisordebugport     1
    hypervisorbaudrate      115200
    
    Resume Loader Settings
    ----------------------
    identifier              {resumeloadersettings}
    inherit                 {globalsettings}
    
    Device options
    --------------
    identifier              {0f3f41f4-5ae2-11eb-a27e-e0d55ecc65a3}
    description             Windows Recovery
    ramdisksdidevice        partition=\Device\HarddiskVolume4
    ramdisksdipath          \Recovery\WindowsRE\boot.sdi
    
    Device options
    --------------
    identifier              {562f507f-413a-11eb-bfdb-e0d55ecc65a3}
    description             Windows Recovery
    ramdisksdidevice        unknown
    ramdisksdipath          \Recovery\WindowsRE\boot.sdi
      My Computer

  8. AlterMind's Avatar
    Posts : 28
    Windows 10
    Thread Starter
       #8

    dalchina said:
    I don't know that an in-place upgrade repair install would
    b. create the missing partition
    Yes I think you have a point here. I guess I have no other choice...

    - - - Updated - - -

    Matthew Wai said:
    The following is the output of DiskParInfo.bat.
    The output is not shown on a single line.

    Code:
        Disk 0 : HDD. It has 5 partition(s). Model: ST500DM002-1BD142    
        Disk 1 : USB. It has 2 partition(s). Model: PNY OU3 3.0  
        Disk 2 : USB. It has 1 partition(s). Model: Kingston DataTraveler 2.0
    Indeed it's nicely displayed in a box. Not when I'm doing it though.
    Crazy enough, the your sentence in bold did only appear in my editor when I "quoted" it, but not in your original reply (!?)
      My Computer

  9. Matthew Wai's Avatar
    Posts : 5,799
    Windows 10 Home 20H2
       #9

    It is in my reply. Please read my original reply again.
      My Computer

  10. AlterMind's Avatar
    Posts : 28
    Windows 10
    Thread Starter
       #10

    Matthew Wai said:
    It is in my reply. Please read my original reply again.
    I don't understand what you are saying; What is the it you are referring to ? And in which reply ?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:53.
Find Us




Windows 10 Forums