Windows 10: Insider ISOs - can't get past OOBE stage Solved


  1. Posts : 1,497
    Windows 10 Pro (32-bit) 16299.15
       4 Weeks Ago #1

    Insider ISOs - can't get past OOBE stage


    I've been trying to get some of the latest official Insider ISOs to install in a VirtualBox VM which I've used many times before.

    But I can't get past the OOBE screens.

    I get long periods of 'Just a Moment...' for a few minutes, then "Something Went Wrong" with an error message in yellow such as OOBEREGION, OOBESETTINGSMULTIPAGE or OOBELOCAL.

    Click image for larger version. 

Name:	Screenshot_OOBERegion_Crop.png 
Views:	0 
Size:	14.6 KB 
ID:	204893

    Most times there's a Try Again option which sometimes works, but sometimes it just boots me back to the start of OOBE. Even when I think I've got to the end, it just loops straight back to ask me my region again.

    Previous non-Insider builds have installed fine in that VM, and I can install 1803 and then join Insider (because I don't get OOBE again at that point), but I'd like to install the ISO directly.

    Anyone else seen this? What has changed in these latest builds...?
      My ComputerSystem Spec

  2. Kari's Avatar
    Posts : 15,055
    Windows 10 Pro
       4 Weeks Ago #2

    DavidY said: View Post
    Most times there's a Try Again option which sometimes works, but sometimes it just boots me back to the start of OOBE. Even when I think I've got to the end, it just loops straight back to ask me my region again.
    Have you tried the Skip button? I've seen that screen a couple of times, usually clicking Skip continues OOBE as if nothing had happened.

    Kari
      My ComputerSystem Spec


  3. Posts : 1,497
    Windows 10 Pro (32-bit) 16299.15
    Thread Starter
       4 Weeks Ago #3

    Kari said: View Post
    Have you tried the Skip button? I've seen that screen a couple of times, usually clicking Skip continues OOBE as if nothing had happened.

    Kari
    I have - but eventually I get to screens with no Skip option available. The Try Again option from here just whirs the circling dots for a minute or two, then throws me back to the 1st screen and asks me for my Region.

    Click image for larger version. 

Name:	Screenshot90_Crop.png 
Views:	0 
Size:	24.1 KB 
ID:	204898
      My ComputerSystem Spec

  4. Kari's Avatar
    Posts : 15,055
    Windows 10 Pro
       4 Weeks Ago #4

    One thing that you could try is Sysprep, it is pretty good in fixing OOBE.

    When you come to region selection screen, press SHIFT + F10 to open Command Prompt and enter following command:

    %windir%\System32\Sysprep\sysprep.exe /oobe /reboot

    This clears current GUIDs and SIDs, restarts computer and runs OOBE again. Takes a minute or so.

    I am not saying this resolves your issue, but it has done it for me quite often when OOBE for one or another reason cannot finish setting up Windows.

    Kari
      My ComputerSystem Spec


  5. Posts : 1,497
    Windows 10 Pro (32-bit) 16299.15
    Thread Starter
       4 Weeks Ago #5

    Kari said: View Post
    One thing that you could try is Sysprep, it is pretty good in fixing OOBE.

    When you come to region selection screen, press SHIFT + F10 to open Command Prompt and enter following command:

    %windir%\System32\Sysprep\sysprep.exe /oobe /reboot

    This clears current GUIDs and SIDs, restarts computer and runs OOBE again. Takes a minute or so.

    I am not saying this resolves your issue, but it has done it for me quite often when OOBE for one or another reason cannot finish setting up Windows.

    Kari
    Thanks Kari,

    I'll give that a go tomorrow.
      My ComputerSystem Spec


  6. Posts : 1,497
    Windows 10 Pro (32-bit) 16299.15
    Thread Starter
       4 Weeks Ago #6

    Kari said: View Post
    When you come to region selection screen, press SHIFT + F10 to open Command Prompt and enter following command:
    %windir%\System32\Sysprep\sysprep.exe /oobe /reboot
    Thanks Kari!

    That does seem to get me past the issues.

    I still think there is an underlying problem though- it should just work out of the box. What I'm not of sure is whether something has got corrupted in my VirtualBox setup, or whether there's something about 1809 Insider Builds which takes longer and is perhaps failing on a "Timeout". If it's not just confined to Insider then I guess we will see people getting the problem on physical machines as well when 1809 is released...

    Thanks for your help in any case. :)
      My ComputerSystem Spec

  7.    4 Weeks Ago #7

    Hi there

    @DavidY
    I agree it should work straight OOB but rather than windows update I've found by far the most successful way of installing these builds is to get them via the UUP-->ISO download methods and then manually install from the generated iso.

    You can also get skip ahead (skippy) builds as well even if you aren't in the program - I do it that way too as the skip ahead program is currently closed to new accounts.

    to get the builds

    UUP (Unified Update Platform) Generation Project (v2.4.2_RC) [by @RGAdguard & mkuba50] (thanks @cereberus for that link).

    or UUP dump

    once you get the eventual iso (it's done automatically) just run the setup and I've found zero problems this way.

    When doing insider builds via standard windows update I've had a few GSOD's !! You can install keeping everything or a new install --your choice. Using UUP methods - no probs - always installed.

    From a VM - don't use the iso to build the Guest -- power on your VM and then run the setup file from within the Guest -- for update rather than new install).

    Cheers
    jimbo
    Last edited by jimbo45; 4 Weeks Ago at 05:08. Reason: added info about installing as a VM
      My ComputerSystem Spec

  8.    4 Weeks Ago #8

    I had a recent Insider update that always failed. I don't think it was this exact reason but it would get to 20% and no further. I tried the update 3 times and each time it failed at the 20% point. I had a Macrium disc image of an earlier version and restored to that version. It then did the update without problems and the last two updates have also updated without problems.
      My ComputersSystem Spec


  9. Posts : 1,497
    Windows 10 Pro (32-bit) 16299.15
    Thread Starter
       4 Weeks Ago #9

    jimbo45 said: View Post
    I agree it should work straight OOB but rather than windows update I've found by far the most successful way of installing these builds is to get them via the UUP-->ISO download methods and then manually install from the generated iso.
    Thanks Jimbo,

    In this case it wasn't Windows Update - I was using the official ISO downloaded from Microsoft's Insider web page, and the OOBE errors happen when I install that ISO.

    I had the same problem with the previous ISO too (which I downloaded twice, so I don't think it was a corrupt ISO).
      My ComputerSystem Spec


 

Related Threads
Microsoft releases Windows 10 Insider Preview build 14342 ISOs for your downloading pleasure 737689801114017792 Source and download: https://www.microsoft.com/en-us/software-download/windowsinsiderpreviewadvanced
BSOD at stage of booting Win (after fixmbr) in BSOD Crashes and Debugging
Hi, I have GRUB launcher as MBR, so that give me a choice every time I turn on my laptop to choose between 10 or Linux Mint. Today, I decided to delete Mint, because I dont need him anymore. After deleting that part on disk and resize to D: (as...
An error occured when my installation goes to second stage. Then it recovered my last OS version and said that update fail because this "WindowsUpdate_C1900101 OR WindowsUpdate_dt000". What I have to do? My Windows 10 Update application also gone...
Source: http://blogs.windows.com/bloggingwindows/2015/06/05/releasing-isos-for-windows-10-insider-preview-build-10130/ See: https://www.tenforums.com/windows-10-news/1946-download-windows-10-insider-preview-iso-file.html
Source: Take the stage at Microsoft Ignite! - Office Blogs
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:29.
Find Us