Cumulative Update KB4041676 Windows 10 v1703 Build 15063.674

Page 14 of 15 FirstFirst ... 412131415 LastLast
  1. gcwizard's Avatar
    Posts : 60
    Win 10 home x64 version 1709
       14 Oct 2017 #130

    slicendice said: View Post
    I am not sure if this will work, but worth a try.

    Make absolutely sure you are logged in as a user of the Administrators group.

    Do your usual enable/disable procedure for touch pad. Then save the settings and close the dialog.

    After all that is done, restart computer by pressing WIN+R on your keyboard and typing this command in the dialog box:
    Code:
    shutdown /r /t 0
    Report back after you have tested this. I am curious to know if this solved your issue.
    Seems to have worked Slicendice but I will reserve judgement for a couple of days. I did multiple restarts using the normally start/power method and no issues so far. Curious what the /r /t 0 options are? Thanks.
      My ComputersSystem Spec

  2. slicendice's Avatar
    Posts : 3,664
    Windows 10 Pro x64 v1809 Build 17763.134 (Branch: RS5 Release Preview)
       14 Oct 2017 #131

    gcwizard said: View Post
    Seems to have worked Slicendice but I will reserve judgement for a couple of days. I did multiple restarts using the normally start/power method and no issues so far. Curious what the /r /t 0 options are? Thanks.
    /r = reboot
    /t = time in seconds
    0 = the amount of seconds

    In latest builds I have come to an understanding that shutdown and reboot using the start menu buttons has additional switches enabled and that could cause issues for some.

    The command I recommended for you to use, does a full reboot and restores and remembers nothing from previous session after the system has started. What I mean is that it forces Fast Startup to forget, which in turn means memory gets populated with clean data during next boot.



    You can type shutdown /? in Command Prompt for full explanation of all switches available.
      My ComputersSystem Spec

  3. gcwizard's Avatar
    Posts : 60
    Win 10 home x64 version 1709
       15 Oct 2017 #132

    slicendice said: View Post
    /r = reboot
    /t = time in seconds
    0 = the amount of seconds

    In latest builds I have come to an understanding that shutdown and reboot using the start menu buttons has additional switches enabled and that could cause issues for some.

    The command I recommended for you to use, does a full reboot and restores and remembers nothing from previous session after the system has started. What I mean is that it forces Fast Startup to forget, which in turn means memory gets populated with clean data during next boot.



    You can type shutdown /? in Command Prompt for full explanation of all switches available.
    My laptop is set for fast startup, would switching to normal cause it to forget previous session also? With Win 10 1703 and my SSD, it cold boots in 14 seconds which I like a lot. Thanks for the info, very useful. Since my desktop came OEM 8.0(now 1703 pro) I grew used to using scannow and restorehealth commands weekly to keep WAU working and still had to do 6 re-installs all the way thru 8.1 final update. Need to upgrade the laptop to pro so I can have gpedit to gain more control over WAU. I have a 12gb monthly cap from my ISP and for some reason updates are not being shared by both units even though settings are correct for this. While I can manually go the MS update catalog and download the monthly CU's to a flash drive I would prefer this was done thru WAU with only the one download of the package. Strange that Windows has the ability to share these but I cannot access them in one PC and copy them to the other PC. I had thought a copy was in the WU temp folder. I can thru command prompt getpackageinfo look at what updates are installed. I clean files frequently to keep my SSD(250gb) from filling up. I will try the shutdown command string on both units and see if the November CU's are shared. Thanks for the help!
      My ComputersSystem Spec

  4.    15 Oct 2017 #133

    VBF said: View Post
    Just a thought - if you do a "Winver" does it show 1703 (OS Build 15063.674)?

    If it does, the CU HAS actually installed - even if it says it hasn't.
    NO, it does not.
      My ComputerSystem Spec

  5.    23 Oct 2017 #134

    Click image for larger version. 

Name:	1.jpg 
Views:	2 
Size:	146.8 KB 
ID:	159746
    - yes, I have restarted...
      My ComputerSystem Spec

  6. gcwizard's Avatar
    Posts : 60
    Win 10 home x64 version 1709
       23 Oct 2017 #135

    My touchpad continues to re-enable itself in spite of being turned off since this CU was installed. Slicendice's suggestion above for a command restart with r /t 0 fixes it for a few hours then it enables again. PIA for typing email and forum posts as my hands sometimes contact the pad causing unwanted cursor movement in the text. Maybe the November CU will address this issue. The touchpad driver (MS 10.0.15063) appears to be unchanged and no option to roll back the driver.
      My ComputersSystem Spec

  7.    23 Oct 2017 #136

    Hi, I've no idea about yours specifically, but you could look for options like this (I appreciate yours is different- have you checked under Mouse options in the Control Panel?):
    Click image for larger version. 

Name:	1.jpg 
Views:	74 
Size:	12.4 KB 
ID:	159756

    Click image for larger version. 

Name:	2.jpg 
Views:	3 
Size:	74.1 KB 
ID:	159757
      My ComputerSystem Spec

  8. gcwizard's Avatar
    Posts : 60
    Win 10 home x64 version 1709
       23 Oct 2017 #137

    I have a precision touchpad. Only touchpad settings available are through settings/touchpad where I have disabled touchpad and disabled taps through the advanced gestures settings. This kept it disabled until the latest CU version .674 and now it is back. I can enable and then un-enable it, restart and no touchpad but after several hours it resumes on it's own. It always shows it is disabled even when it has resumed working. Tried using run command restart /r /t 0 suggested above by Slicendice which seemed to work but the issue is back. I use a MS wireless mouse. tried disconnecting and reconnecting it. It came with zero software unless in the USB adapter. I cannot find the touchpad through any mouse settings, only through settings/touchpad and through device manage but DM has no settings available. Dell laptop, one year old, specs listed to the left. OEM win 10 home upgraded every step to .674
      My ComputersSystem Spec

  9. slicendice's Avatar
    Posts : 3,664
    Windows 10 Pro x64 v1809 Build 17763.134 (Branch: RS5 Release Preview)
       23 Oct 2017 #138

    One option could be to completely disable the touchpad driver from DeviceManager if you are certain you will never use it.
      My ComputersSystem Spec

  10.    03 Nov 2017 #139

    Do you guys know how big the download is? I'm on limited data so need to know if I can do this update at home
      My ComputerSystem Spec


 
Page 14 of 15 FirstFirst ... 412131415 LastLast

Related Threads
Update August 8th 2017: Cumulative Update KB4034674 Windows 10 v1703 Build 15063.540 - Windows 10 Forums Available for Windows 10 PC and Windows 10 Mobile version 1703. Source:...
Available for Windows 10 PC and Windows 10 Mobile version 1703. Source: https://support.microsoft.com/en-us/help/4034674 Find Windows 10 Version Number
Source: https://support.microsoft.com/en-us/help/4025342 See also: July 2017 Security Update Guide Find Windows 10 Version Number Direct download links for KB4025342 from Microsoft Update Catalog:
Update April 11th 2017: This KB4016251 update was replaced by KB4015583. 849040898163752960 Source: Feedback Hub
847862697324564481 Source: Feedback Hub KB4016250 direct download links:
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:51.
Find Us