Windows 10: Cumulative Update KB4032188 Windows 10 v1703 Build 15063.502

Page 8 of 9 FirstFirst ... 6789 LastLast

  1. Posts : 1,304
    W10 pro x64 and W8.1 x86
       05 Aug 2017 #70

    My Acer has an Atheros wireless adapter and W10 has always taken around 2 hours to install because of a faulty driver. I started reporting this back to MS nearly 3yrs ago.

    Help ! System Interrupts are running are crippling CPU Solved - Windows 10 Forums

    stop W10 installing specific driver during installation? - Windows 10 Forums

    On the Acer I found much later that pressing the WiFi button a few times at the appropriate point in the installation seemed to disable things and the process speeded up.

    The problem was still not solved even with the CU and I had to go through the same performance again.
      My ComputerSystem Spec

  2. Posts : 8,027
    10 Home x64 (1803) (10 Pro on 2nd pc)
       05 Aug 2017 #71

    Bree said: View Post
    So far every cumulative update for 1703 has hung at 1% or 2% for me. That seems to be because I have a metered connection set. For other updates like Defender definitions, checking for updates responds correctly saying: 'can't download while on a metered connection' and offering a 'download' button.

    Click image for larger version. 

Name:	Update download.PNG 
Views:	5 
Size:	13.1 KB 
ID:	147374

    This doesn't happen for Cumulative Updates, instead it starts downloading then stops at a few percent, never to go any further. Turning off 'metered connection' invariably lets the download continue then run to completion.

    This would appear to be a failed implementation of the revised wording in 'Settings - Windows Update' that appeared with 1703.

    Click image for larger version. 

Name:	update settings 1703.PNG 
Views:	167 
Size:	8.8 KB 
ID:	147373

    Being curious (and with time on my hands) I got my test machine (15063.483) to check for updates on a metered connection, then waited to see what would happen. It duly found KB4032188 and went straight to 'downloading', crawling painfully slowly to 1% then stuck at 2%. Task Manager showed it was actually downloading something occasionally over the WiFi , but not much and not very often. I presumed these were the few bits that MS deemed 'required to keep Windows running smoothly'.

    I waited (and waited) to see what, if anything, might eventually get installed - nothing, it turns out. Instead, after waiting quarter of an hour it eventually gave the 'Updates are available. We'll download them when you are not using a metered connection' message and the 'Download' button.

    Instead of clicking 'Download' I restarted the PC, just to see if something got installed after all. Nothing, but some part of the update had obviously been downloaded (though not installed) because when I checked for updates again it skipped straight to the message and the 'Download' button.

    Curious. Why would it have downloaded something it can't then install? 1703's new idea of overriding metered connections to 'download only those updates required to keep Windows running smoothly' still seems to be a 'work in progress'. :)
    Last edited by Bree; 05 Aug 2017 at 20:42.
      My ComputersSystem Spec

  3. Posts : 9
    Windows 10 Pro x64 Black Eddition
       06 Aug 2017 #72

    i still have not gotten this update
      My ComputerSystem Spec

  4.    06 Aug 2017 #73

    So on my 12yr old Dell today finally got around to doing the clean install of CU next to my existing AU 1532 which goes back to Windows 7.

    Boot and install from USB drive on my 2nd SSD went surprisingly quick, and after a few restarts everything was up and running with no issues whatsoever. Just in case I had disabled the Broadcom NIC in the BIOS. First install (despite it looking and finding Updates in the process) identified itself as 15063.0, but after another round of WUs that got stuck at 17% upon which I manually restarted, it booted into 15063.502. Enabled the NIC and as expected the Broadcom issue is fixed. Doesn't come as a surprise that the new CU feels a bit "snappier" overall than the old AU. Next course of action will be to leave the old junk behind and migrate from AU to CU.

    This is what the boot manager looked like right after the install.
    Attached Thumbnails Attached Thumbnails image.jpg  
      My ComputerSystem Spec

  5.    06 Aug 2017 #74

    Finally got this update on a system today.
      My ComputerSystem Spec

  6.    07 Aug 2017 #75

    Phone update?

    Has anyone received this cumulative on their phone yet. I have a 950 and am still waiting.
      My ComputerSystem Spec

  7.    07 Aug 2017 #76

    Think we shouldn't consider it as a problem, Windows 10 is the problem. Even managed to reproduce those errors on a freshly installed virtual Windows 10 without any other software installed at all. Think it is just an initializing-thingie. One of the things 'solved' in this update has to do with those stupid store and apps, after all...As said it appeared only once, would be more 'worrysome' if the errors where there every boot AND had an influence on system stability. Which is not the case. Only general advice I can give is: avoid installing store apps at all. Delete the apps you can delete. It will make Win 10 start smoother without daily app-updates that regularly don't work out that well... Hopefully Microsoft will also realize that the Store is a fail and adds a lot of unnessary troubles for users. Besides, what is offered in matter of apps is mainly useless junk anyway.

    Vaio 7 said: View Post
    Same here on 3 laptops, even created a separate thread: KB 4032188 issue...
    First time I have a problem with W 10 updates, no matter of the build.

    Any clues??
      My ComputerSystem Spec

  8.   My ComputersSystem Spec

  9. Posts : 14
    Windows 10 Home 64 bit
       25 Sep 2017 #78


    Despite 38 attempts at automatically installing, and my manual attempt, the Windows Standalone Updater tells me it is not suitable for my machine.

    So maybe it will stop trying, AS IF.
      My ComputerSystem Spec

  10. Posts : 428
    Windows 10 PRO
       25 Sep 2017 #79

    johndough said: View Post

    Despite 38 attempts at automatically installing, and my manual attempt, the Windows Standalone Updater tells me it is not suitable for my machine.

    So maybe it will stop trying, AS IF.
    If you don't succeed......

      My ComputerSystem Spec

Page 8 of 9 FirstFirst ... 6789 LastLast

Related Threads
Update June 27th 2017: Cumulative Update KB4022716 Windows 10 v1703 Build 15063.447 - Windows 10 Forums Source: See also: June 13, 2017 Security Update Guide - Microsoft Security Response...
Update May 9th 2017: Replaced by - Cumulative Update KB4016871 Windows 10 v1703 Build 15063.297 - - Windows 10 Forums Source: Direct download links for KB4016240 from Microsoft Update...
Update April 11th 2017: This KB4016251 update was replaced by KB4015583. 849040898163752960 Source: Feedback Hub
849836090638778368 849040898163752960 Source: Feedback Hub KB4016252 direct download links:
847862697324564481 Source: Feedback Hub KB4016250 direct download links:
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 01:36.
Find Us