Page 8 of 10 FirstFirst ... 678910 LastLast
  1.    13 Jul 2017 #71
    Join Date : Jul 2016
    Posts : 10
    Windows 10 Pro x64

    WU does not pick up KB4025342 on my primary laptop.

    I then tried installing KB4025342 cumulative update from catalog and I got 'The update is not applicable to your computer': https://support.microsoft.com/en-za...cable-to-your-computer-error-when-you-install

    Huh? Well, it explains why WU is not picking it up.So I thought I'd try KB4022716. But it's been pulled from MS catalog.

    WU troubleshooter repeatedly shows this i.e. on successive runs.

    Issues found

    Service registration is missing or corrupt Fixed
    Reset service registration Not run

    Potential Windows Update Database error detectedPotential Windows Update Database error detected
    Possible issues may prevent Windows Update from keeping your system up to date. Fixed
    Repair Windows Update Database Corruption Completed

    Windows Update components must be repaired
    One or more Windows Update components are configured incorrectly. Fixed
    Repair Windows Update components Not run

    Check for pending updatesCheck for pending updates Fixed
    Download and Install pending updates Completed


    Well, at least I'm not the only one: Cumulaitve Update KB4025342 causing errors in Update Troubleshooter
    except he could at least install the KB.

    sfc /scannow shows no integrity violations.

    Also, other Windows Updates e.g. WD, Office are working fine.

    So I thought I'd try the KB4025342 delta update! It all went like clockwork, until the the last moment: KB4025342 was not installed.

    This is on my newest laptop, three older laptops all updated fine.

    So I either give up, and hope a future update sorts this out, or I (reluctantly) try resetting WU? Reset Windows Update in Windows 10

    Edit: Retried delta update, and now also got the 'not applicable' message there ...
      My ComputerSystem Spec
  2.    13 Jul 2017 #72
    Join Date : Apr 2015
    Posts : 122
    windows 10 home

    I suppose I should be grateful I wasnt expecting to immediately leap into being productive this morning, that said its settled down.
      My ComputerSystem Spec
  3.    13 Jul 2017 #73
    Join Date : Aug 2015
    Posts : 504
    Windows 10 Pro x64 1607

    Windows Defender is still not fixed. The Advanced Settings in the Firewall and Network Protection area is still not working. Sent multiple feedbacks to Microsoft and no luck.

    Windows runs great overall, just sucks to see things that are broken in Windows
      My ComputerSystem Spec
  4.    13 Jul 2017 #74
    Join Date : Nov 2016
    Louny
    Posts : 65
    Windows 10 Home 64 bit (build 1607)

    Quote Originally Posted by lmaneke View Post
    Windows Defender is still not fixed. The Advanced Settings in the Firewall and Network Protection area is still not working. Sent multiple feedbacks to Microsoft and no luck.


    Windows runs great overall, just sucks to see things that are broken in Windows
    Hello mate,
    I had this problem too, with settings in the firewall and network. This cumulative update KB4025342 has fixed the problem. I can't see any other problems.
    See you
    Czecher
      My ComputerSystem Spec
  5.    13 Jul 2017 #75
    Join Date : Dec 2014
    Posts : 433
    Windows 10 Pro x64

    Quote Originally Posted by lmaneke View Post
    Windows Defender is still not fixed. The Advanced Settings in the Firewall and Network Protection area is still not working. Sent multiple feedbacks to Microsoft and no luck.

    Windows runs great overall, just sucks to see things that are broken in Windows
    You can get to the advanced settings through the control panel, though I agree the control panel shouldn't be hidden if the Windows 10 settings equivalent is broke.

    You can also get there via the Windows 10 settings -> Network & Internet -> Windows Firewall
      My ComputerSystem Spec
  6.    14 Jul 2017 #76
    Join Date : Aug 2015
    Canada
    Posts : 113
    Windows 10 pro x64-bit

    Quote Originally Posted by lmaneke View Post
    Windows Defender is still not fixed. The Advanced Settings in the Firewall and Network Protection area is still not working. Sent multiple feedbacks to Microsoft and no luck.

    Windows runs great overall, just sucks to see things that are broken in Windows
    Maybe you should try to reset Windows Firewall with the following command line in a command prompt with admin privilege:

    netsh advfirewall reset

    Sometimes, that's all it takes to get things back to normal.
      My ComputerSystem Spec
  7.    14 Jul 2017 #77
    Join Date : Aug 2016
    S/E England
    Posts : 4,512
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Quote Originally Posted by IronZorg89 View Post
    Maybe you should try to reset Windows Firewall with the following command line in a command prompt ...
    Sometimes, that's all it takes to get things back to normal.
    It's not Windows Firewall that's broken, it's the Windows Defender Security Center. On the 'Firewall & network protection' page there are five blue links near the bottom. The one that should take you to 'Advanced settings' doesn't work. It does (since this update?) produce a UAC prompt, but even if you click 'Yes' nothing happens.

    You can get to Advanced settings through Control Panel > All Control Panel Items > Windows Firewall, so it's available, just not from the Windows Defender Security Center.
      My ComputersSystem Spec
  8.    14 Jul 2017 #78
    Join Date : Aug 2015
    Canada
    Posts : 113
    Windows 10 pro x64-bit

    Quote Originally Posted by Bree View Post
    It's not Windows Firewall that's broken, it's the Windows Defender Security Center. On the 'Firewall & network protection' page there are five blue links near the bottom. The one that should take you to 'Advanced settings' doesn't work. It does (since this update?) produce a UAC prompt, but even if you click 'Yes' nothing happens.

    You can get to Advanced settings through Control Panel > All Control Panel Items > Windows Firewall, so it's available, just not from the Windows Defender Security Center.
    How about uninstalling the update (roll back), for this is probably the only way to see if the issue has to do with the recent CU as you have mentioned. After the uninstall, if the problem doesn't reiterate itself, then, we can start from a firm ground into resolving the issue by pausing automatic update in order for it (CU) not to reinstall. That would be a good start until a fix is found..

    On the other hand, if the problem still persists, one can start digging a little bit deeper by running dism.exe (restorehealth) or even try a repair upgrade.
      My ComputerSystem Spec
  9.    14 Jul 2017 #79
    Join Date : Aug 2016
    S/E England
    Posts : 4,512
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Quote Originally Posted by IronZorg89 View Post
    How about uninstalling the update (roll back), for this is probably the only way to see if the issue has to do with the recent CU as you have mentioned....
    No, I was saying this problem has always been there and that the recent CU still hasn't fixed it. Here it was reported back in April...
    Anyone else have this problem in the new Windows Defender that when going to Firewall & Network protection tab in the left column and then clicking on "Advanced settings" in the links on that tab, a prompt appears to give permission to load the settings but when clicking Yes, nothing comes up after that?
    Creators Update - Discussion of new changes and quirks

    On the other hand, if the problem still persists, one can start digging a little bit deeper by running dism.exe (restorehealth) or even try a repair upgrade.
    Actually, until May 19th DISM was broken in 1703 too...
    Creators update component store shows corruption but unable to repair
      My ComputersSystem Spec
  10.    14 Jul 2017 #80
    Join Date : Oct 2014
    Arnold, MD
    Posts : 29,021
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)

    Quote Originally Posted by Bree View Post
    It's not Windows Firewall that's broken, it's the Windows Defender Security Center. On the 'Firewall & network protection' page there are five blue links near the bottom. The one that should take you to 'Advanced settings' doesn't work. It does (since this update?) produce a UAC prompt, but even if you click 'Yes' nothing happens.

    You can get to Advanced settings through Control Panel > All Control Panel Items > Windows Firewall, so it's available, just not from the Windows Defender Security Center.
    Did you notice that that one is the only one that uses MMC Console? A Clue????
      My ComputersSystem Spec

 
Page 8 of 10 FirstFirst ... 678910 LastLast


Similar Threads
Thread Forum
Cumulative Update KB4020102 Windows 10 v1703 Build 15063.332
Source: https://support.microsoft.com/en-us/help/4020102 Find Windows 10 Version Number Direct download links for KB4020102 MSU file from Microsoft Update Catalog:
Windows 10 News
Cumulative Update KB4016871 Windows 10 v1703 Build 15063.296
Update May 25, 2017: Replaced by: Cumulative Update KB4020102 Windows 10 v1703 Build 15063.332 - Windows 10 Forums Source: https://support.microsoft.com/en-us/help/4016871/windows-10-update-kb4016871 Find Windows 10 Version Number
Windows 10 News
Cumulative Update KB4016240 Windows 10 v1703 Build 15063.250
Update May 9th 2017: Replaced by - Cumulative Update KB4016871 Windows 10 v1703 Build 15063.297 - - Windows 10 Forums Source: https://support.microsoft.com/en-us/help/4016240 Direct download links for KB4016240 from Microsoft Update...
Windows 10 News
Cumulative Update KB4015583 Windows 10 v1703 Build 15063.138
Update April 25th 2017: Cumulative Update KB4016240 Windows 10 v1703 Build 15063.250 - - Windows 10 Forums 851905319412187136 Source: Feedback Hub
Windows 10 News
Insider Cumulative Update KB4016250 for Windows 10 v1703 Build 15063.11
847862697324564481 Source: Feedback Hub KB4016250 direct download links:
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:26.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums