Windows 10: Announcing Windows 10 Insider Preview Build 16226 for PC Insider

Page 18 of 61 FirstFirst ... 8161718192028 ... LastLast
  1. f14tomcat's Avatar
    Posts : 36,258
    Triple boot - Win 10 Pro, Win 10 Pro Insider (2) - (and a sprinkling of VMs)
       22 Jun 2017 #170

    AndreTen said: View Post
    No, it's Windows recovery (empty thou).

    I got bounf of errors on every update attempt. Error 3 is there like 20 times (credential problems) and error 10 - enhanced storage
    That mess I've never seen before.
      My ComputersSystem Spec

  2. AndreTen's Avatar
    Posts : 14,171
    Windows 10 (Pro and Insider Pro)
       22 Jun 2017 #171

    f14tomcat said: View Post
    That mess I've never seen before.
    error 3 is someth8ing like this:
    Click image for larger version. 

Name:	image.png 
Views:	6 
Size:	30.1 KB 
ID:	140704
      My ComputersSystem Spec

  3.    22 Jun 2017 #172

    waltc said: View Post
    I successfully installed 16226 as an upgrade over 16215, after first uninstalling .net 3.5. Problem is that now in 16226 I cannot reinstall .net 3.5 at all. *
    Same problem here ... tried everything but cannot get .net 3.5 to install.
      My ComputerSystem Spec

  4. johngalt's Avatar
    Posts : 1,534
    WinX Pro x64 IP current
       22 Jun 2017 #173

    Third time's the charm, apparently.

    Got 226 installed . Not worried about .NET 3.5 until something specifically asks for it.
      My ComputersSystem Spec

  5.    22 Jun 2017 #174

    EdTittel said: View Post
    I, too, cannot get .NET Framework 3.5 (and older elements) back on my Dell Venue Pro 11 7139. Same error code as the earlier poster with the same problem. Here's a screencap:
    Attachment 140687
    My biggest problem with this comes from a handful of utilities -- including Core Temp/8GadgetPack, RAPR, Secunia PSI, and no doubt others -- upon which I rely. Alas, they apparently rely on older .NET versions, and won't work without said support loaded and running. Ouch!--Ed--PS: I posted to Feedback Hub on this, including a trace of the powershell stuff shown running and failing. Hopefully, that will help them. We'll see how long this sticks around...
    Had this problem before, and here is how I got it to work. Follow this, and it should be all good. I hope it helps.
    Once you have the Windows installation files in a known place, you can use the DISM (Deployment Image Servicing and Management) utility to enable NET 3.5 for you. For that, you need to open a prompt command in Administrator mode by searching for “command prompt”, right click on the icon and choose “Run as administrator”. You can then run the following commandism /online /enable-feature /featurename:NetFx3 /All /Source:F:\sources\sxs /LimitAccessinstall-net35-dismNote that in my case, my Windows installation files were on F: but this could be different on your system. Replace F: with the appropriate drive.This procedure is documented officially at http://support.microsoft.com/kb/2734782, but I thought that it lacked context and explanations. If you are lucky, NET 3.5 should now be installed and you can run your app!Unfortunately, I was not so lucky and I found myself facing a new error message: “Error 0x800f081f. The source files could not be found. Use the “source” option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see MSN.com - Hotmail, Outlook, Skype, Bing, Latest News, Photos Videos (the page links to Configure a Windows Repair Source which is how to configure a Windows Repair Source). Ultimately, none of the information contained in these pages did help me get this thing off the ground.install-net35-dism-errorNote that if you want to open the dism.log file, you may find yourself looking at a bit of text and a pile of garbage that look like Asian characters. This is because the text reader is not using the proper character encoding. I was able to read the log properly by opening the file in Word and hand-picking the UTF-8 encoding. The log didn’t provide any useful into to fix this, but at least I was able to discard it after that.
      My ComputerSystem Spec

  6. Ztruker's Avatar
    Posts : 6,252
    Windows 10 Pro X64 17134.191
       22 Jun 2017 #175

    Update of my Oracle VM 10 Pro X64 took about 3 hours. About halfway through I got a new window that said I was running out of hard drive space and provided some ways to free up space. Didn't help as the VM was setup with 30GB for the VDI. I had to expand the VDI with VBoxManage (made it 50GB) then booted the VM and used Disk Management to expand C: to fill the new 20GB of free space. Worked great.

    I then started Windows Update again and after a few minutes it sort of picked up where it left off. Much nicer than just having the update fail with an error code.
      My ComputersSystem Spec

  7.    22 Jun 2017 #176

    loquacious said: View Post
    Same problem here ... tried everything but cannot get .net 3.5 to install.
    Try this as it is how I managed to get it straight on my machine.
    Once you have the Windows installation files in a known place, you can use the DISM (Deployment Image Servicing and Management) utility to enable NET 3.5 for you. For that, you need to open a prompt command in Administrator mode by searching for “command prompt”, right click on the icon and choose “Run as administrator”. You can then run the following commandism /online /enable-feature /featurename:NetFx3 /All /Source:F:\sources\sxs /LimitAccessinstall-net35-dismNote that in my case, my Windows installation files were on F: but this could be different on your system. Replace F: with the appropriate drive.This procedure is documented officially at http://support.microsoft.com/kb/2734782, but I thought that it lacked context and explanations. If you are lucky, NET 3.5 should now be installed and you can run your app!Unfortunately, I was not so lucky and I found myself facing a new error message: “Error 0x800f081f. The source files could not be found. Use the “source” option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source (the page links to Configure a Windows Repair Source which is how to configure a Windows Repair Source). Ultimately, none of the information contained in these pages did help me get this thing off the ground.install-net35-dism-errorNote that if you want to open the dism.log file, you may find yourself looking at a bit of text and a pile of garbage that look like Asian characters. This is because the text reader is not using the proper character encoding. I was able to read the log properly by opening the file in Word and hand-picking the UTF-8 encoding. The log didn’t provide any useful into to fix this, but at least I was able to discard it after that.
      My ComputerSystem Spec

  8. Kari's Avatar
    Posts : 14,814
    Windows 10 Pro
       22 Jun 2017 #177

    I'm giving up for today.

    PRO and Education, all language versions, no issues, but today I've been fighting with Enterprise all the day. As now even an upgrade from clean install failed, I decided to take a break.
      My ComputerSystem Spec

  9. Indianatone's Avatar
    Posts : 450
    Windows 7 Ultimate 64 Bit and VM
       22 Jun 2017 #178

    I have just upgraded a VM with no issues to 16226. What is this Video playback in the Personalization Tab? See screenshots:Click image for larger version. 

Name:	Windows 10 x64-2017-06-22-18-48-33.png 
Views:	5 
Size:	776.6 KB 
ID:	140706Click image for larger version. 

Name:	Windows 10 x64-2017-06-22-18-46-39.png 
Views:	4 
Size:	598.7 KB 
ID:	140707
      My ComputersSystem Spec

  10.    22 Jun 2017 #179

    6 times a charm? Apparently not!
    I give up!

    Click image for larger version. 

Name:	000378.png 
Views:	8 
Size:	13.2 KB 
ID:	140708
      My ComputerSystem Spec


 
Page 18 of 61 FirstFirst ... 8161718192028 ... LastLast

Related Threads
UPDATE: Windows 10 Insider Preview build 15058 ISO file is also now available for download here (click on link). 842858810314129408 841771427787235329 Source: Announcing Windows 10 Insider Preview Build 15058 for PC - Windows Experience...
825063872533032960 825065215523971072 825213100613775360 Source: https://blogs.windows.com/windowsexperience/2017/01/27/announcing-windows-10-insider-preview-build-15019-pc
UPDATE: 742889757512867840 Source: Announcing Windows 10 Insider Preview Build 14366 Mobile Build 14364 | Windows Experience Blog
Source: Announcing Windows 10 Insider Preview Build 10166 | Blogging Windows Preview Builds - Check for New Windows 10 Builds . Windows 10 Home Insider Preview build 10166 product key: KTNPV-KTRK4-3RRR8-39X6W-W44T3 Windows 10 Pro...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:29.
Find Us