This is still a beta build OS not confirmed as a RTM yet. If you upgrade over Win 7, when final release is out, you will still need to reinstall Win 7 to upgrade. Better to install to a different drive.
Why? As far as I know you can just update again to the official release on the 29th? Why reinstall if you originally did an upgrade?
Computer Type: PC/Desktop System Manufacturer/Model Number: Pi Foundation Raspberry Pi 4B OS: Windows 10 IoT CPU: Broadcom BCM2711B0 quad-core A72 (ARMv8-A) 64-bit @ 1.5GHz Motherboard: Raspberry Pi Model 4B Memory: 4GB LPDDR4 SDRAM Graphics Card: Broadcom VideoCore VI Sound Card: Combined 3.5mm audio jack and composite video Monitor(s) Displays: 7 Inch Pi Foundation Touch Screen Screen Resolution: Two 4K displays at up to 4Kp30 or a single display at up to 4Kp60 Keyboard: Mini Wireless with touchpad Mouse: FT5406 10 point capacitive touchscreen PSU: USB C 5.1V @ 3A Case: Pibow Coupe Ninja Cooling: Heat Sink and Fan Shim. Hard Drives: 16 GB SanDisk Ultra Class 1 Micro SD card. Internet Speed: Gigabit Ethernet + 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Browser: Edge Antivirus: non Other Info: Dual Micro HDMI
2 USB 2 ports and 2 USB 3 ports
40 GPIO pins
Bluetooth 5.0, Bluetooth Low Energy (BLE)
Camera interface (CSI)
Display interface (DSI)
Micro SD card slot
Computer Type: PC/Desktop System Manufacturer/Model Number: Self Assembled OS: Windows 10 Pro x64 CPU: Intel(R) Core(TM) i7-4790 3.6GHz Motherboard: Asus ACPI x64-Based Memory: 16.00 GB Graphics Card: Intel HD Graphics 4600 On Board Sound Card: Realtek High Deifinition On Board Monitor(s) Displays: Dell S2340M Screen Resolution: 1920 x 1080 Hard Drives: 960 EVO + 850 EVO + WD5000AZLX Internet Speed: DL=50M UL=5M
Computer Type: Laptop System Manufacturer/Model Number: Microsoft Surface Book 2 OS: Windows 10 & IP Dual Boot
You're saying that we can upgrade preview builds directly to final Windows 10? How?
The same way you just updated to 10240. If you originally did an upgrade from a genuine Windows 7 SP1 or 8.1 install your good to go. If you clean installed you can update the official release too, you just won't be genuine or fully activated.
Computer Type: PC/Desktop System Manufacturer/Model Number: Pi Foundation Raspberry Pi 4B OS: Windows 10 IoT CPU: Broadcom BCM2711B0 quad-core A72 (ARMv8-A) 64-bit @ 1.5GHz Motherboard: Raspberry Pi Model 4B Memory: 4GB LPDDR4 SDRAM Graphics Card: Broadcom VideoCore VI Sound Card: Combined 3.5mm audio jack and composite video Monitor(s) Displays: 7 Inch Pi Foundation Touch Screen Screen Resolution: Two 4K displays at up to 4Kp30 or a single display at up to 4Kp60 Keyboard: Mini Wireless with touchpad Mouse: FT5406 10 point capacitive touchscreen PSU: USB C 5.1V @ 3A Case: Pibow Coupe Ninja Cooling: Heat Sink and Fan Shim. Hard Drives: 16 GB SanDisk Ultra Class 1 Micro SD card. Internet Speed: Gigabit Ethernet + 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Browser: Edge Antivirus: non Other Info: Dual Micro HDMI
2 USB 2 ports and 2 USB 3 ports
40 GPIO pins
Bluetooth 5.0, Bluetooth Low Energy (BLE)
Camera interface (CSI)
Display interface (DSI)
Micro SD card slot
The same way you just updated to 10240. If you originally did an upgrade from a genuine Windows 7 SP1 or 8.1 install your good to go. If you clean installed you can update the official release too, you just won't be genuine or fully activated.
The same way you just updated to 10240. If you originally did an upgrade from a genuine Windows 7 SP1 or 8.1 install your good to go. If you clean installed you can update the official release too, you just won't be genuine or fully activated.
Computer Type: PC/Desktop System Manufacturer/Model Number: Self Assembled OS: Windows 10 Pro x64 CPU: Intel(R) Core(TM) i7-4790 3.6GHz Motherboard: Asus ACPI x64-Based Memory: 16.00 GB Graphics Card: Intel HD Graphics 4600 On Board Sound Card: Realtek High Deifinition On Board Monitor(s) Displays: Dell S2340M Screen Resolution: 1920 x 1080 Hard Drives: 960 EVO + 850 EVO + WD5000AZLX Internet Speed: DL=50M UL=5M
Computer Type: Laptop System Manufacturer/Model Number: Microsoft Surface Book 2 OS: Windows 10 & IP Dual Boot
Computer Type: PC/Desktop System Manufacturer/Model Number: Pi Foundation Raspberry Pi 4B OS: Windows 10 IoT CPU: Broadcom BCM2711B0 quad-core A72 (ARMv8-A) 64-bit @ 1.5GHz Motherboard: Raspberry Pi Model 4B Memory: 4GB LPDDR4 SDRAM Graphics Card: Broadcom VideoCore VI Sound Card: Combined 3.5mm audio jack and composite video Monitor(s) Displays: 7 Inch Pi Foundation Touch Screen Screen Resolution: Two 4K displays at up to 4Kp30 or a single display at up to 4Kp60 Keyboard: Mini Wireless with touchpad Mouse: FT5406 10 point capacitive touchscreen PSU: USB C 5.1V @ 3A Case: Pibow Coupe Ninja Cooling: Heat Sink and Fan Shim. Hard Drives: 16 GB SanDisk Ultra Class 1 Micro SD card. Internet Speed: Gigabit Ethernet + 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Browser: Edge Antivirus: non Other Info: Dual Micro HDMI
2 USB 2 ports and 2 USB 3 ports
40 GPIO pins
Bluetooth 5.0, Bluetooth Low Energy (BLE)
Camera interface (CSI)
Display interface (DSI)
Micro SD card slot
Hi everyone,
After not recieving the AU from Microsoft I took a look at winver I noticed that my PC has never received or installed an update since the original Windows 10 build (Version 10.0 or build 10240).
I began to investigated and...
I am currently running Windows 10 Build 9926 due to having issues installing Build 10162 using a USB. I had Build 9926 installed before and successfully updated to 10162 however a failed graphics driver install forced me to reinstall and since...
Hi I am jobin I need Windows 10 Pro Iso Build 10240, any one can share me site link where i get download this file for free. I want to test windows 10 Pro. I have heard that 12040 build is latest, that is why I wrote in tilte. Please share me live...
Hi all! I have been reading through the forums for the past couple days after installing the Windows 10 Enterprise TP 10074 on a laptop here at work. I ran through the activation and setup of a MS account on that build and then ran Windows updates....