Cumulative Update KB4503293 Windows 10 v1903 build 18362.175 - June 11 Win Update

Page 7 of 22 FirstFirst ... 5678917 ... LastLast
  1.    #60

    Took eight minutes from time of clicking to Check Updates to installed and done. This included a slow down of the install for two minutes at 74%. All appears well.
      My ComputerSystem Spec

  2.    #61

    That wasn't some major update with many leftovers to need some special cleanup.
      My ComputersSystem Spec

  3.    #62

    IronZorg89 said: View Post
    I would also add:
    Type the following command, and then press Enter.
    It may take several minutes for the command operation to be completed.
    DISM.exe /Online /Cleanup-image /Restorehealth
    Important When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:
    DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
    Note Replace the C:\RepairSource\Windows placeholder with the location of your repair source. For more
    information about using the DISM tool to repair Windows, reference Repair a Windows Image.
    Type the following command and press Enter.
    It may take several minutes for the command operation to be completed.
    sfc /scannow
    Close the command prompt, and then run Windows Update again.
    I ran DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
    and it completed to 100% then closed. I do not have access to a second system, btw. All I have is a clone of my boot drive which was made three weeks ago prior to upgrading to 1903. I THOUGHT I had several restore points too, but looked just now and the only one there is from two hours ago.

    Then I ran sfc /scannow and it completed to 100% with no errors. Then I restarted, tried WU again, and again it was unable to complete the install of the update. I noticed afterward a pop-up in the bottom right that said "recent updates were unable to install, click here for more information", so I clicked on the arrow for more information, however nothing happened.
      My ComputerSystem Spec

  4.    #63

    johnhoh said: View Post
    I ran DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess
    and it completed to 100% then closed. I do not have access to a second system, btw. All I have is a clone of my boot drive which was made three weeks ago prior to upgrading to 1903. I THOUGHT I had several restore points too, but looked just now and the only one there is from two hours ago.

    Then I ran sfc /scannow and it completed to 100% with no errors. Then I restarted, tried WU again, and again it was unable to complete the install of the update. I noticed afterward a pop-up in the bottom right that said "recent updates were unable to install, click here for more information", so I clicked on the arrow for more information, however nothing happened.
    I don't know if I am mistaken, but the command-line "DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess" asks to replace " C:\RepairSource\Windows ", placeholder with the location of your source. That is what you had not probably done. To do it, you have to download an ISO from Microsoft Windows 10 download page and mount it https://www.microsoft.com/en-us/soft...load/windows10. Then use it (mounted drive letter) as your source for the command-line to work.
    Last edited by IronZorg89; 4 Weeks Ago at 18:39.
      My ComputersSystem Spec

  5.    #64

    Fast and smooth and for me the disk clean up was offering to remove the remains!

    Click image for larger version. 

Name:	Annotation 2019-06-12 014344.png 
Views:	6 
Size:	55.6 KB 
ID:	236930

    Only surprise was that disk cleanup normally takes an eternity to do the cleanup and this
    time all was done in less then a minute! :)
      My ComputerSystem Spec

  6.    #65

    @johnhoh,

    For a better understanding of what I was talking about in previous post, you can have a look at this tutorial by Brink:

    Use DISM to Repair Windows 10 Image Performance & Maintenance:
    Use DISM to Repair Windows 10 Image
      My ComputersSystem Spec

  7.    #66

    rezpower said: View Post
    Fast and smooth and for me the disk clean up was offering to remove the remains!

    Click image for larger version. 

Name:	Annotation 2019-06-12 014344.png 
Views:	6 
Size:	55.6 KB 
ID:	236930

    Only surprise was that disk cleanup normally takes an eternity to do the cleanup and this
    time all was done in less then a minute! :)
    Is that a Windows Home or Pro version? My Pro version desktop didn't offer to clean up Windows Update but the Home Version on my Laptop did. Just trying to figure out why some do and some don't. :)
      My ComputerSystem Spec


  8.    #67

    IronZorg89 said: View Post
    I don't know if I am mistaken, but the command-line "DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess" asks to replace " C:\RepairSource\Windows ", placeholder with the location of your source. That is what you had not probably done. To do it, you have to download an ISO from Microsoft Windows 10 download page and mount it https://www.microsoft.com/en-us/soft...load/windows10. Then use it (mounted drive letter) as your source for the command-line to work.
    my mistake, I had actually run

    DISM.exe /Online /Cleanup-image /Restorehealth

    and it appeared to work correctly, went to 100%, then let me close it.

    But being willing to try anything I'm going to download a fresh iso anyway, then mount it, and use the DISM repairsource method
      My ComputerSystem Spec

  9.    #68

    johnhoh said: View Post
    my mistake, I had actually run

    DISM.exe /Online /Cleanup-image /Restorehealth

    and it appeared to work correctly, went to 100%, then let me close it.

    But being willing to try anything I'm going to download a fresh iso anyway, then mount it, and use the DISM repairsource method
    Good and let see if you can overcome this stalemate with the mounted ISO. One thing that seems obvious is that the Windows Update component store is corrupt and this approach with the /LimitAccess switch is probably the best way to fix it.

    UPDATE: I forgot to mention to pay special attention to steps 6 & 7 in Brink's tutorial from the previous post about Install.wim and Install.esd respectively.
      My ComputersSystem Spec

  10. Eddie Doc's Avatar
    Posts : 271
    Windows 10 Home Version 1903 OS Build 18362.239
       #69

    Installed successfully, but Disk Cleanup did not offer to clean up anything from Windows Update this time.
      My ComputerSystem Spec


 
Page 7 of 22 FirstFirst ... 5678917 ... LastLast

Related Threads
UPDATE 6/11: Cumulative Update KB4503293 Windows 10 v1903 build 18362.175 - June 11 Source: https://support.microsoft.com/en-us/help/4497935 See also: New KB4498523 Servicing Stack Update for Windows 10 v1903 - May 29
UPDATE 5/29: Cumulative Update KB4497935 Windows 10 v1903 build 18362.145 - May 29 Source: Announcing Windows 10 Insider Preview Build 18362 | Windows Experience Blog See also: New KB4498523 Servicing Stack Update for Windows 10 v1903...
UPDATE 5/29: Cumulative Update KB4497935 Windows 10 v1903 build 18362.145 - May 29 Source: https://support.microsoft.com/en-us/help/4505057/windows-10-update-kb4505057 See also: How to get the Windows 10 May 2019 Update version 1903
UPDATE 5/19: Cumulative Update KB4505057 Windows 10 Insider 1903 build 18362.116 Source: https://support.microsoft.com/en-us/help/4497936/windows-10-update-kb4497936 See also: KB4497165 Intel microcode updates for Windows 10 Insider...
UPDATE 4/26: Cumulative Update KB4497093 for Windows 10 Insider 1903 build 18362.86 Insider - Windows 10 Forums New Windows 10 Insider Preview Fast+Skip Build 18885 (20H1) - April 26 Insider - Windows 10 Forums Source:
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 16:21.
Find Us